diff mbox

[v3] pwm: vt8500: Update vt8500 PWM driver support

Message ID 1350929425-17516-1-git-send-email-linux@prisktech.co.nz (mailing list archive)
State New, archived
Headers show

Commit Message

Tony Prisk Oct. 22, 2012, 6:10 p.m. UTC
This patch updates pwm-vt8500.c to support devicetree probing and
make use of the common clock subsystem.

A binding document describing the PWM controller found on
arch-vt8500 is also included.

Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
---
 .../devicetree/bindings/pwm/vt8500-pwm.txt         |   17 ++++
 drivers/pwm/pwm-vt8500.c                           |   83 ++++++++++++++------
 2 files changed, 77 insertions(+), 23 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pwm/vt8500-pwm.txt

Comments

Thierry Reding Oct. 23, 2012, 10:14 p.m. UTC | #1
On Tue, Oct 23, 2012 at 07:10:24AM +1300, Tony Prisk wrote:
[...]
> @@ -87,6 +98,11 @@ static int vt8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
>  {
>  	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
>  
> +	if (!clk_enable(vt8500->clk)) {
> +		dev_err(chip->dev, "failed to enable clock\n");
> +		return -EBUSY;
> +	};
> +

I don't think that works. The clock API returns 0 on success and a
negative error code on failure. So this should rather be something like:

	err = clk_enable(vt8500->clk);
	if (err < 0) {
		dev_err(chip->dev, "failed to enable clock: %d\n", err);
		return err;
	}

> @@ -123,6 +153,12 @@ static int __devinit pwm_probe(struct platform_device *pdev)
>  	chip->chip.ops = &vt8500_pwm_ops;
>  	chip->chip.base = -1;
>  	chip->chip.npwm = VT8500_NR_PWMS;
> +	chip->clk = devm_clk_get(&pdev->dev, NULL);
> +

The blank line should go above the call to devm_clk_get().

> +	if (IS_ERR_OR_NULL(chip->clk)) {
> +		dev_err(&pdev->dev, "clock source not specified\n");
> +		return PTR_ERR(chip->clk);
> +	}
[...]
> +	if (!clk_prepare(chip->clk)) {
> +		dev_err(&pdev->dev, "failed to prepare clock\n");
> +		return -EBUSY;
> +	}
> +

Same comment here. I wonder how this code can work, since if the clock
is properly prepared, then it will return 0, and the above will return
-EBUSY.

>  	ret = pwmchip_add(&chip->chip);
> -	if (ret < 0)
> +	if (ret < 0) {
> +		dev_err(&pdev->dev, "failed to add pwmchip\n");

Error messages can be considered prose, so this should be: "failed to
add PWM chip".

Thierry
Tony Prisk Oct. 24, 2012, 3:48 a.m. UTC | #2
On Wed, 2012-10-24 at 00:14 +0200, Thierry Reding wrote:
> On Tue, Oct 23, 2012 at 07:10:24AM +1300, Tony Prisk wrote:
> [...]
> > @@ -87,6 +98,11 @@ static int vt8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
> >  {
> >  	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
> >  
> > +	if (!clk_enable(vt8500->clk)) {
> > +		dev_err(chip->dev, "failed to enable clock\n");
> > +		return -EBUSY;
> > +	};
> > +
> 
> I don't think that works. The clock API returns 0 on success and a
> negative error code on failure. So this should rather be something like:
> 
> 	err = clk_enable(vt8500->clk);
> 	if (err < 0) {
> 		dev_err(chip->dev, "failed to enable clock: %d\n", err);
> 		return err;
> 	}
> 
> > @@ -123,6 +153,12 @@ static int __devinit pwm_probe(struct platform_device *pdev)
> >  	chip->chip.ops = &vt8500_pwm_ops;
> >  	chip->chip.base = -1;
> >  	chip->chip.npwm = VT8500_NR_PWMS;
> > +	chip->clk = devm_clk_get(&pdev->dev, NULL);
> > +
> 
> The blank line should go above the call to devm_clk_get().
> 
> > +	if (IS_ERR_OR_NULL(chip->clk)) {
> > +		dev_err(&pdev->dev, "clock source not specified\n");
> > +		return PTR_ERR(chip->clk);
> > +	}
> [...]
> > +	if (!clk_prepare(chip->clk)) {
> > +		dev_err(&pdev->dev, "failed to prepare clock\n");
> > +		return -EBUSY;
> > +	}
> > +
> 
> Same comment here. I wonder how this code can work, since if the clock
> is properly prepared, then it will return 0, and the above will return
> -EBUSY.
> 
> >  	ret = pwmchip_add(&chip->chip);
> > -	if (ret < 0)
> > +	if (ret < 0) {
> > +		dev_err(&pdev->dev, "failed to add pwmchip\n");
> 
> Error messages can be considered prose, so this should be: "failed to
> add PWM chip".
> 
> Thierry

I don't know why none of this caused a failure when boot tested. The
clock should have been disabled 'automagically' at bootup, and never
reenabled. *shrug* Fixed in new patch v3 (didn't notice there was
already a v3).

Regards
Tony P
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
new file mode 100644
index 0000000..bcc6367
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt
@@ -0,0 +1,17 @@ 
+VIA/Wondermedia VT8500/WM8xxx series SoC PWM controller
+
+Required properties:
+- compatible: should be "via,vt8500-pwm"
+- reg: physical base address and length of the controller's registers
+- #pwm-cells: should be 2.  The first cell specifies the per-chip index
+  of the PWM to use and the second cell is the period in nanoseconds.
+- clocks: phandle to the PWM source clock
+
+Example:
+
+pwm1: pwm@d8220000 {
+	#pwm-cells = <2>;
+	compatible = "via,vt8500-pwm";
+	reg = <0xd8220000 0x1000>;
+	clocks = <&clkpwm>;
+};
diff --git a/drivers/pwm/pwm-vt8500.c b/drivers/pwm/pwm-vt8500.c
index ad14389..ebbc41c 100644
--- a/drivers/pwm/pwm-vt8500.c
+++ b/drivers/pwm/pwm-vt8500.c
@@ -1,7 +1,8 @@ 
 /*
  * drivers/pwm/pwm-vt8500.c
  *
- *  Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
  *
  * This software is licensed under the terms of the GNU General Public
  * License version 2, as published by the Free Software Foundation, and
@@ -21,14 +22,24 @@ 
 #include <linux/io.h>
 #include <linux/pwm.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 
 #include <asm/div64.h>
 
-#define VT8500_NR_PWMS 4
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+
+/*
+ * SoC architecture allocates register space for 4 PWMs but only
+ * 2 are currently implemented.
+ */
+#define VT8500_NR_PWMS	2
 
 struct vt8500_chip {
 	struct pwm_chip chip;
 	void __iomem *base;
+	struct clk *clk;
 };
 
 #define to_vt8500_chip(chip)	container_of(chip, struct vt8500_chip, chip)
@@ -52,7 +63,7 @@  static int vt8500_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	unsigned long long c;
 	unsigned long period_cycles, prescale, pv, dc;
 
-	c = 25000000/2; /* wild guess --- need to implement clocks */
+	c = clk_get_rate(vt8500->clk);
 	c = c * period_ns;
 	do_div(c, 1000000000);
 	period_cycles = c;
@@ -87,6 +98,11 @@  static int vt8500_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 {
 	struct vt8500_chip *vt8500 = to_vt8500_chip(chip);
 
+	if (!clk_enable(vt8500->clk)) {
+		dev_err(chip->dev, "failed to enable clock\n");
+		return -EBUSY;
+	};
+
 	pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 0));
 	writel(5, vt8500->base + (pwm->hwpwm << 4));
 	return 0;
@@ -98,6 +114,8 @@  static void vt8500_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 
 	pwm_busy_wait(vt8500->base + 0x40 + pwm->hwpwm, (1 << 0));
 	writel(0, vt8500->base + (pwm->hwpwm << 4));
+
+	clk_disable(vt8500->clk);
 }
 
 static struct pwm_ops vt8500_pwm_ops = {
@@ -107,12 +125,24 @@  static struct pwm_ops vt8500_pwm_ops = {
 	.owner = THIS_MODULE,
 };
 
-static int __devinit pwm_probe(struct platform_device *pdev)
+static const struct of_device_id vt8500_pwm_dt_ids[] = {
+	{ .compatible = "via,vt8500-pwm", },
+	{ /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, vt8500_pwm_dt_ids);
+
+static int vt8500_pwm_probe(struct platform_device *pdev)
 {
 	struct vt8500_chip *chip;
 	struct resource *r;
+	struct device_node *np = pdev->dev.of_node;
 	int ret;
 
+	if (!np) {
+		dev_err(&pdev->dev, "invalid devicetree node\n");
+		return -EINVAL;
+	}
+
 	chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
 	if (chip == NULL) {
 		dev_err(&pdev->dev, "failed to allocate memory\n");
@@ -123,6 +153,12 @@  static int __devinit pwm_probe(struct platform_device *pdev)
 	chip->chip.ops = &vt8500_pwm_ops;
 	chip->chip.base = -1;
 	chip->chip.npwm = VT8500_NR_PWMS;
+	chip->clk = devm_clk_get(&pdev->dev, NULL);
+
+	if (IS_ERR_OR_NULL(chip->clk)) {
+		dev_err(&pdev->dev, "clock source not specified\n");
+		return PTR_ERR(chip->clk);
+	}
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (r == NULL) {
@@ -131,18 +167,25 @@  static int __devinit pwm_probe(struct platform_device *pdev)
 	}
 
 	chip->base = devm_request_and_ioremap(&pdev->dev, r);
-	if (chip->base == NULL)
+	if (!chip->base)
 		return -EADDRNOTAVAIL;
 
+	if (!clk_prepare(chip->clk)) {
+		dev_err(&pdev->dev, "failed to prepare clock\n");
+		return -EBUSY;
+	}
+
 	ret = pwmchip_add(&chip->chip);
-	if (ret < 0)
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add pwmchip\n");
 		return ret;
+	}
 
 	platform_set_drvdata(pdev, chip);
 	return ret;
 }
 
-static int __devexit pwm_remove(struct platform_device *pdev)
+static int vt8500_pwm_remove(struct platform_device *pdev)
 {
 	struct vt8500_chip *chip;
 
@@ -150,28 +193,22 @@  static int __devexit pwm_remove(struct platform_device *pdev)
 	if (chip == NULL)
 		return -ENODEV;
 
+	clk_unprepare(chip->clk);
+
 	return pwmchip_remove(&chip->chip);
 }
 
-static struct platform_driver pwm_driver = {
+static struct platform_driver vt8500_pwm_driver = {
+	.probe		= vt8500_pwm_probe,
+	.remove		= vt8500_pwm_remove,
 	.driver		= {
 		.name	= "vt8500-pwm",
 		.owner	= THIS_MODULE,
+		.of_match_table = vt8500_pwm_dt_ids,
 	},
-	.probe		= pwm_probe,
-	.remove		= __devexit_p(pwm_remove),
 };
+module_platform_driver(vt8500_pwm_driver);
 
-static int __init pwm_init(void)
-{
-	return platform_driver_register(&pwm_driver);
-}
-arch_initcall(pwm_init);
-
-static void __exit pwm_exit(void)
-{
-	platform_driver_unregister(&pwm_driver);
-}
-module_exit(pwm_exit);
-
-MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("VT8500 PWM Driver");
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_LICENSE("GPL v2");