@@ -32,6 +32,7 @@
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
+#include <linux/usb/phy.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <mach/map.h>
@@ -133,7 +134,9 @@ struct s3c_hsotg_ep {
* struct s3c_hsotg - driver state.
* @dev: The parent device supplied to the probe function
* @driver: USB gadget driver
- * @plat: The platform specific configuration data.
+ * @phy: The otg phy transceiver structure for phy control.
+ * @plat: The platform specific configuration data. This can be removed once
+ * all SoCs support usb transceiver.
* @regs: The memory area mapped for accessing registers.
* @irq: The IRQ number we are using
* @supplies: Definition of USB power supplies
@@ -153,6 +156,7 @@ struct s3c_hsotg_ep {
struct s3c_hsotg {
struct device *dev;
struct usb_gadget_driver *driver;
+ struct usb_phy *phy;
struct s3c_hsotg_plat *plat;
spinlock_t lock;
@@ -2854,7 +2858,10 @@ static void s3c_hsotg_phy_enable(struct s3c_hsotg *hsotg)
struct platform_device *pdev = to_platform_device(hsotg->dev);
dev_dbg(hsotg->dev, "pdev 0x%p\n", pdev);
- if (hsotg->plat->phy_init)
+
+ if (hsotg->phy)
+ usb_phy_init(hsotg->phy);
+ else if (hsotg->plat->phy_init)
hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
}
@@ -2869,7 +2876,9 @@ static void s3c_hsotg_phy_disable(struct s3c_hsotg *hsotg)
{
struct platform_device *pdev = to_platform_device(hsotg->dev);
- if (hsotg->plat->phy_exit)
+ if (hsotg->phy)
+ usb_phy_shutdown(hsotg->phy);
+ else if (hsotg->plat->phy_exit)
hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
}
@@ -3493,6 +3502,7 @@ static void s3c_hsotg_release(struct device *dev)
static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
{
struct s3c_hsotg_plat *plat = pdev->dev.platform_data;
+ struct usb_phy *phy;
struct device *dev = &pdev->dev;
struct s3c_hsotg_ep *eps;
struct s3c_hsotg *hsotg;
@@ -3501,20 +3511,27 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev)
int ret;
int i;
- plat = pdev->dev.platform_data;
- if (!plat) {
- dev_err(&pdev->dev, "no platform data defined\n");
- return -EINVAL;
- }
-
hsotg = devm_kzalloc(&pdev->dev, sizeof(struct s3c_hsotg), GFP_KERNEL);
if (!hsotg) {
dev_err(dev, "cannot get memory\n");
return -ENOMEM;
}
+ phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+ if (IS_ERR_OR_NULL(phy)) {
+ /* Fallback for pdata */
+ plat = pdev->dev.platform_data;
+ if (!plat) {
+ dev_err(&pdev->dev, "no platform data or transceiver defined\n");
+ return -EPROBE_DEFER;
+ } else {
+ hsotg->plat = plat;
+ }
+ } else {
+ hsotg->phy = phy;
+ }
+
hsotg->dev = dev;
- hsotg->plat = plat;
hsotg->clk = devm_clk_get(&pdev->dev, "otg");
if (IS_ERR(hsotg->clk)) {
Adding the phy driver support to hsotg driver. Keeping the platform data for continuing the smooth operation for boards which still uses it. Signed-off-by: Praveen Paneri <p.paneri@samsung.com> --- drivers/usb/gadget/s3c-hsotg.c | 37 +++++++++++++++++++++++++++---------- 1 files changed, 27 insertions(+), 10 deletions(-)