@@ -1168,7 +1168,7 @@ config ARM_NR_BANKS
config IWMMXT
bool "Enable iWMMXt support"
depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
- default y if PXA27x || PXA3xx || PXA95x || ARCH_MMP
+ default y if PXA27x || PXA3xx || ARCH_MMP
help
Enable support for iWMMXt context switching at run time if
running on a CPU that supports it.
@@ -2,27 +2,6 @@ if ARCH_PXA
menu "Intel PXA2xx/PXA3xx Implementations"
-config ARCH_PXA_V7
- bool "ARMv7 (PXA95x) based systems"
-
-if ARCH_PXA_V7
-comment "Marvell Dev Platforms (sorted by hardware release time)"
-config MACH_TAVOREVB3
- bool "PXA95x Development Platform (aka TavorEVB III)"
- select CPU_PXA955
-
-config MACH_SAARB
- bool "PXA955 Handheld Platform (aka SAARB)"
- select CPU_PXA955
-endif
-
-config PXA_V7_MACH_AUTO
- def_bool y
- depends on ARCH_PXA_V7
- depends on !MACH_SAARB
- select MACH_TAVOREVB3
-
-if !ARCH_PXA_V7
comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
config MACH_PXA3XX_DT
@@ -630,7 +609,6 @@ config MACH_ZIPIT2
bool "Zipit Z2 Handheld"
select HAVE_PWM
select PXA27x
-endif
endmenu
config PXA25x
@@ -688,18 +666,6 @@ config CPU_PXA935
help
PXA935 (codename Tavor-P65)
-config PXA95x
- bool
- select CPU_PJ4
- help
- Select code specific to PXA95x variants
-
-config CPU_PXA955
- bool
- select PXA95x
- help
- PXA950 (codename MG1)
-
config PXA_SHARP_C7xx
bool
select SHARPSL_PM
@@ -19,7 +19,6 @@ endif
obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o
obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o
obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
-obj-$(CONFIG_PXA95x) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o pxa95x.o smemc.o
obj-$(CONFIG_CPU_PXA300) += pxa300.o
obj-$(CONFIG_CPU_PXA320) += pxa320.o
obj-$(CONFIG_CPU_PXA930) += pxa930.o
@@ -36,9 +35,7 @@ obj-$(CONFIG_MACH_ZYLONITE300) += zylonite.o zylonite_pxa300.o
obj-$(CONFIG_MACH_ZYLONITE320) += zylonite.o zylonite_pxa320.o
obj-$(CONFIG_MACH_LITTLETON) += littleton.o
obj-$(CONFIG_MACH_TAVOREVB) += tavorevb.o
-obj-$(CONFIG_MACH_TAVOREVB3) += tavorevb3.o
obj-$(CONFIG_MACH_SAAR) += saar.o
-obj-$(CONFIG_MACH_SAARB) += saarb.o
# 3rd Party Dev Platforms
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
@@ -57,7 +57,7 @@ void clk_pxa2xx_cken_disable(struct clk *clk);
extern struct syscore_ops pxa2xx_clock_syscore_ops;
-#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
+#if defined(CONFIG_PXA3xx)
#define DEFINE_PXA3_CKEN(_name, _cken, _rate, _delay) \
struct clk clk_##_name = { \
.ops = &clk_pxa3xx_cken_ops, \
@@ -703,7 +703,7 @@ void __init pxa_set_ohci_info(struct pxaohci_platform_data *info)
}
#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
-#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
static struct resource pxa27x_resource_keypad[] = {
[0] = {
.start = 0x41500000,
@@ -872,7 +872,7 @@ struct platform_device pxa27x_device_pwm1 = {
.resource = pxa27x_resource_pwm1,
.num_resources = ARRAY_SIZE(pxa27x_resource_pwm1),
};
-#endif /* CONFIG_PXA27x || CONFIG_PXA3xx || CONFIG_PXA95x*/
+#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
#ifdef CONFIG_PXA3xx
static struct resource pxa3xx_resources_mci2[] = {
@@ -981,7 +981,7 @@ struct platform_device pxa3xx_device_gcu = {
#endif /* CONFIG_PXA3xx */
-#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
+#if defined(CONFIG_PXA3xx)
static struct resource pxa3xx_resources_i2c_power[] = {
{
.start = 0x40f500c0,
@@ -1082,7 +1082,7 @@ struct platform_device pxa3xx_device_ssp4 = {
.resource = pxa3xx_resource_ssp4,
.num_resources = ARRAY_SIZE(pxa3xx_resource_ssp4),
};
-#endif /* CONFIG_PXA3xx || CONFIG_PXA95x */
+#endif /* CONFIG_PXA3xx */
struct resource pxa_resource_gpio[] = {
{
@@ -194,17 +194,6 @@
#define __cpu_is_pxa935(id) (0)
#endif
-#ifdef CONFIG_CPU_PXA955
-#define __cpu_is_pxa955(id) \
- ({ \
- unsigned int _id = (id) >> 4 & 0xfff; \
- _id == 0x581 || _id == 0xc08 \
- || _id == 0xb76; \
- })
-#else
-#define __cpu_is_pxa955(id) (0)
-#endif
-
#define cpu_is_pxa210() \
({ \
__cpu_is_pxa210(read_cpuid_id()); \
@@ -255,10 +244,6 @@
__cpu_is_pxa935(read_cpuid_id()); \
})
-#define cpu_is_pxa955() \
- ({ \
- __cpu_is_pxa955(read_cpuid_id()); \
- })
/*
@@ -297,15 +282,6 @@
#define __cpu_is_pxa93x(id) (0)
#endif
-#ifdef CONFIG_PXA95x
-#define __cpu_is_pxa95x(id) \
- ({ \
- __cpu_is_pxa955(id); \
- })
-#else
-#define __cpu_is_pxa95x(id) (0)
-#endif
-
#define cpu_is_pxa2xx() \
({ \
__cpu_is_pxa2xx(read_cpuid_id()); \
@@ -321,10 +297,6 @@
__cpu_is_pxa93x(read_cpuid_id()); \
})
-#define cpu_is_pxa95x() \
- ({ \
- __cpu_is_pxa95x(read_cpuid_id()); \
- })
/*
* return current memory and LCD clock frequency in units of 10kHz
@@ -84,7 +84,6 @@
#define IRQ_PXA935_MMC0 PXA_IRQ(72) /* MMC0 Controller (PXA935) */
#define IRQ_PXA935_MMC1 PXA_IRQ(73) /* MMC1 Controller (PXA935) */
#define IRQ_PXA935_MMC2 PXA_IRQ(74) /* MMC2 Controller (PXA935) */
-#define IRQ_PXA955_MMC3 PXA_IRQ(75) /* MMC3 Controller (PXA955) */
#define IRQ_U2P PXA_IRQ(93) /* USB PHY D+/D- Lines (PXA935) */
#define PXA_GPIO_IRQ_BASE PXA_IRQ(96)
@@ -7,7 +7,6 @@
extern void __init pxa3xx_map_io(void);
extern void __init pxa3xx_init_irq(void);
-extern void __init pxa95x_init_irq(void);
#define pxa3xx_handle_irq ichp_handle_irq
deleted file mode 100644
@@ -1,7 +0,0 @@
-#ifndef __MACH_PXA95X_H
-#define __MACH_PXA95X_H
-
-#include <mach/pxa3xx.h>
-#include <mach/mfp-pxa930.h>
-
-#endif /* __MACH_PXA95X_H */
deleted file mode 100644
@@ -1,295 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/pxa95x.c
- *
- * code specific to PXA95x aka MGx
- *
- * Copyright (C) 2009-2010 Marvell International Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pm.h>
-#include <linux/platform_device.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/hardware.h>
-#include <mach/pxa3xx-regs.h>
-#include <mach/pxa930.h>
-#include <mach/reset.h>
-#include <mach/pm.h>
-#include <mach/dma.h>
-
-#include "generic.h"
-#include "devices.h"
-#include "clock.h"
-
-static struct mfp_addr_map pxa95x_mfp_addr_map[] __initdata = {
-
- MFP_ADDR(GPIO0, 0x02e0),
- MFP_ADDR(GPIO1, 0x02dc),
- MFP_ADDR(GPIO2, 0x02e8),
- MFP_ADDR(GPIO3, 0x02d8),
- MFP_ADDR(GPIO4, 0x02e4),
- MFP_ADDR(GPIO5, 0x02ec),
- MFP_ADDR(GPIO6, 0x02f8),
- MFP_ADDR(GPIO7, 0x02fc),
- MFP_ADDR(GPIO8, 0x0300),
- MFP_ADDR(GPIO9, 0x02d4),
- MFP_ADDR(GPIO10, 0x02f4),
- MFP_ADDR(GPIO11, 0x02f0),
- MFP_ADDR(GPIO12, 0x0304),
- MFP_ADDR(GPIO13, 0x0310),
- MFP_ADDR(GPIO14, 0x0308),
- MFP_ADDR(GPIO15, 0x030c),
- MFP_ADDR(GPIO16, 0x04e8),
- MFP_ADDR(GPIO17, 0x04f4),
- MFP_ADDR(GPIO18, 0x04f8),
- MFP_ADDR(GPIO19, 0x04fc),
- MFP_ADDR(GPIO20, 0x0518),
- MFP_ADDR(GPIO21, 0x051c),
- MFP_ADDR(GPIO22, 0x04ec),
- MFP_ADDR(GPIO23, 0x0500),
- MFP_ADDR(GPIO24, 0x04f0),
- MFP_ADDR(GPIO25, 0x0504),
- MFP_ADDR(GPIO26, 0x0510),
- MFP_ADDR(GPIO27, 0x0514),
- MFP_ADDR(GPIO28, 0x0520),
- MFP_ADDR(GPIO29, 0x0600),
- MFP_ADDR(GPIO30, 0x0618),
- MFP_ADDR(GPIO31, 0x0610),
- MFP_ADDR(GPIO32, 0x060c),
- MFP_ADDR(GPIO33, 0x061c),
- MFP_ADDR(GPIO34, 0x0620),
- MFP_ADDR(GPIO35, 0x0628),
- MFP_ADDR(GPIO36, 0x062c),
- MFP_ADDR(GPIO37, 0x0630),
- MFP_ADDR(GPIO38, 0x0634),
- MFP_ADDR(GPIO39, 0x0638),
- MFP_ADDR(GPIO40, 0x063c),
- MFP_ADDR(GPIO41, 0x0614),
- MFP_ADDR(GPIO42, 0x0624),
- MFP_ADDR(GPIO43, 0x0608),
- MFP_ADDR(GPIO44, 0x0604),
- MFP_ADDR(GPIO45, 0x050c),
- MFP_ADDR(GPIO46, 0x0508),
- MFP_ADDR(GPIO47, 0x02bc),
- MFP_ADDR(GPIO48, 0x02b4),
- MFP_ADDR(GPIO49, 0x02b8),
- MFP_ADDR(GPIO50, 0x02c8),
- MFP_ADDR(GPIO51, 0x02c0),
- MFP_ADDR(GPIO52, 0x02c4),
- MFP_ADDR(GPIO53, 0x02d0),
- MFP_ADDR(GPIO54, 0x02cc),
- MFP_ADDR(GPIO55, 0x029c),
- MFP_ADDR(GPIO56, 0x02a0),
- MFP_ADDR(GPIO57, 0x0294),
- MFP_ADDR(GPIO58, 0x0298),
- MFP_ADDR(GPIO59, 0x02a4),
- MFP_ADDR(GPIO60, 0x02a8),
- MFP_ADDR(GPIO61, 0x02b0),
- MFP_ADDR(GPIO62, 0x02ac),
- MFP_ADDR(GPIO63, 0x0640),
- MFP_ADDR(GPIO64, 0x065c),
- MFP_ADDR(GPIO65, 0x0648),
- MFP_ADDR(GPIO66, 0x0644),
- MFP_ADDR(GPIO67, 0x0674),
- MFP_ADDR(GPIO68, 0x0658),
- MFP_ADDR(GPIO69, 0x0654),
- MFP_ADDR(GPIO70, 0x0660),
- MFP_ADDR(GPIO71, 0x0668),
- MFP_ADDR(GPIO72, 0x0664),
- MFP_ADDR(GPIO73, 0x0650),
- MFP_ADDR(GPIO74, 0x066c),
- MFP_ADDR(GPIO75, 0x064c),
- MFP_ADDR(GPIO76, 0x0670),
- MFP_ADDR(GPIO77, 0x0678),
- MFP_ADDR(GPIO78, 0x067c),
- MFP_ADDR(GPIO79, 0x0694),
- MFP_ADDR(GPIO80, 0x069c),
- MFP_ADDR(GPIO81, 0x06a0),
- MFP_ADDR(GPIO82, 0x06a4),
- MFP_ADDR(GPIO83, 0x0698),
- MFP_ADDR(GPIO84, 0x06bc),
- MFP_ADDR(GPIO85, 0x06b4),
- MFP_ADDR(GPIO86, 0x06b0),
- MFP_ADDR(GPIO87, 0x06c0),
- MFP_ADDR(GPIO88, 0x06c4),
- MFP_ADDR(GPIO89, 0x06ac),
- MFP_ADDR(GPIO90, 0x0680),
- MFP_ADDR(GPIO91, 0x0684),
- MFP_ADDR(GPIO92, 0x0688),
- MFP_ADDR(GPIO93, 0x0690),
- MFP_ADDR(GPIO94, 0x068c),
- MFP_ADDR(GPIO95, 0x06a8),
- MFP_ADDR(GPIO96, 0x06b8),
- MFP_ADDR(GPIO97, 0x0410),
- MFP_ADDR(GPIO98, 0x0418),
- MFP_ADDR(GPIO99, 0x041c),
- MFP_ADDR(GPIO100, 0x0414),
- MFP_ADDR(GPIO101, 0x0408),
- MFP_ADDR(GPIO102, 0x0324),
- MFP_ADDR(GPIO103, 0x040c),
- MFP_ADDR(GPIO104, 0x0400),
- MFP_ADDR(GPIO105, 0x0328),
- MFP_ADDR(GPIO106, 0x0404),
-
- MFP_ADDR(GPIO159, 0x0524),
- MFP_ADDR(GPIO163, 0x0534),
- MFP_ADDR(GPIO167, 0x0544),
- MFP_ADDR(GPIO168, 0x0548),
- MFP_ADDR(GPIO169, 0x054c),
- MFP_ADDR(GPIO170, 0x0550),
- MFP_ADDR(GPIO171, 0x0554),
- MFP_ADDR(GPIO172, 0x0558),
- MFP_ADDR(GPIO173, 0x055c),
-
- MFP_ADDR(nXCVREN, 0x0204),
- MFP_ADDR(DF_CLE_nOE, 0x020c),
- MFP_ADDR(DF_nADV1_ALE, 0x0218),
- MFP_ADDR(DF_SCLK_E, 0x0214),
- MFP_ADDR(DF_SCLK_S, 0x0210),
- MFP_ADDR(nBE0, 0x021c),
- MFP_ADDR(nBE1, 0x0220),
- MFP_ADDR(DF_nADV2_ALE, 0x0224),
- MFP_ADDR(DF_INT_RnB, 0x0228),
- MFP_ADDR(DF_nCS0, 0x022c),
- MFP_ADDR(DF_nCS1, 0x0230),
- MFP_ADDR(nLUA, 0x0254),
- MFP_ADDR(nLLA, 0x0258),
- MFP_ADDR(DF_nWE, 0x0234),
- MFP_ADDR(DF_nRE_nOE, 0x0238),
- MFP_ADDR(DF_ADDR0, 0x024c),
- MFP_ADDR(DF_ADDR1, 0x0250),
- MFP_ADDR(DF_ADDR2, 0x025c),
- MFP_ADDR(DF_ADDR3, 0x0260),
- MFP_ADDR(DF_IO0, 0x023c),
- MFP_ADDR(DF_IO1, 0x0240),
- MFP_ADDR(DF_IO2, 0x0244),
- MFP_ADDR(DF_IO3, 0x0248),
- MFP_ADDR(DF_IO4, 0x0264),
- MFP_ADDR(DF_IO5, 0x0268),
- MFP_ADDR(DF_IO6, 0x026c),
- MFP_ADDR(DF_IO7, 0x0270),
- MFP_ADDR(DF_IO8, 0x0274),
- MFP_ADDR(DF_IO9, 0x0278),
- MFP_ADDR(DF_IO10, 0x027c),
- MFP_ADDR(DF_IO11, 0x0280),
- MFP_ADDR(DF_IO12, 0x0284),
- MFP_ADDR(DF_IO13, 0x0288),
- MFP_ADDR(DF_IO14, 0x028c),
- MFP_ADDR(DF_IO15, 0x0290),
-
- MFP_ADDR(GSIM_UIO, 0x0314),
- MFP_ADDR(GSIM_UCLK, 0x0318),
- MFP_ADDR(GSIM_UDET, 0x031c),
- MFP_ADDR(GSIM_nURST, 0x0320),
-
- MFP_ADDR(PMIC_INT, 0x06c8),
-
- MFP_ADDR(RDY, 0x0200),
-
- MFP_ADDR_END,
-};
-
-static DEFINE_CK(pxa95x_lcd, LCD, &clk_pxa3xx_hsio_ops);
-static DEFINE_CLK(pxa95x_pout, &clk_pxa3xx_pout_ops, 13000000, 70);
-static DEFINE_PXA3_CKEN(pxa95x_ffuart, FFUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa95x_btuart, BTUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa95x_stuart, STUART, 14857000, 1);
-static DEFINE_PXA3_CKEN(pxa95x_i2c, I2C, 32842000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_keypad, KEYPAD, 32768, 0);
-static DEFINE_PXA3_CKEN(pxa95x_ssp1, SSP1, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_ssp2, SSP2, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_ssp3, SSP3, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_ssp4, SSP4, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_pwm0, PWM0, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_pwm1, PWM1, 13000000, 0);
-static DEFINE_PXA3_CKEN(pxa95x_gpio, GPIO, 13000000, 0);
-
-static struct clk_lookup pxa95x_clkregs[] = {
- INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"),
- /* Power I2C clock is always on */
- INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
- INIT_CLKREG(&clk_pxa95x_lcd, "pxa2xx-fb", NULL),
- INIT_CLKREG(&clk_pxa95x_ffuart, "pxa2xx-uart.0", NULL),
- INIT_CLKREG(&clk_pxa95x_btuart, "pxa2xx-uart.1", NULL),
- INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-uart.2", NULL),
- INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-ir", "UARTCLK"),
- INIT_CLKREG(&clk_pxa95x_i2c, "pxa2xx-i2c.0", NULL),
- INIT_CLKREG(&clk_pxa95x_keypad, "pxa27x-keypad", NULL),
- INIT_CLKREG(&clk_pxa95x_ssp1, "pxa27x-ssp.0", NULL),
- INIT_CLKREG(&clk_pxa95x_ssp2, "pxa27x-ssp.1", NULL),
- INIT_CLKREG(&clk_pxa95x_ssp3, "pxa27x-ssp.2", NULL),
- INIT_CLKREG(&clk_pxa95x_ssp4, "pxa27x-ssp.3", NULL),
- INIT_CLKREG(&clk_pxa95x_pwm0, "pxa27x-pwm.0", NULL),
- INIT_CLKREG(&clk_pxa95x_pwm1, "pxa27x-pwm.1", NULL),
- INIT_CLKREG(&clk_pxa95x_gpio, "pxa-gpio", NULL),
- INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL),
-};
-
-void __init pxa95x_init_irq(void)
-{
- pxa_init_irq(96, NULL);
-}
-
-/*
- * device registration specific to PXA93x.
- */
-
-void __init pxa95x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
-{
- pxa_register_device(&pxa3xx_device_i2c_power, info);
-}
-
-static struct platform_device *devices[] __initdata = {
- &pxa_device_gpio,
- &sa1100_device_rtc,
- &pxa_device_rtc,
- &pxa27x_device_ssp1,
- &pxa27x_device_ssp2,
- &pxa27x_device_ssp3,
- &pxa3xx_device_ssp4,
- &pxa27x_device_pwm0,
- &pxa27x_device_pwm1,
-};
-
-static int __init pxa95x_init(void)
-{
- int ret = 0, i;
-
- if (cpu_is_pxa95x()) {
- mfp_init_base(io_p2v(MFPR_BASE));
- mfp_init_addr(pxa95x_mfp_addr_map);
-
- reset_status = ARSR;
-
- /*
- * clear RDH bit every time after reset
- *
- * Note: the last 3 bits DxS are write-1-to-clear so carefully
- * preserve them here in case they will be referenced later
- */
- ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
-
- clkdev_add_table(pxa95x_clkregs, ARRAY_SIZE(pxa95x_clkregs));
-
- if ((ret = pxa_init_dma(IRQ_DMA, 32)))
- return ret;
-
- register_syscore_ops(&pxa_irq_syscore_ops);
- register_syscore_ops(&pxa3xx_clock_syscore_ops);
-
- ret = platform_add_devices(devices, ARRAY_SIZE(devices));
- }
-
- return ret;
-}
-
-postcore_initcall(pxa95x_init);
deleted file mode 100644
@@ -1,115 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/saarb.c
- *
- * Support for the Marvell Handheld Platform (aka SAARB)
- *
- * Copyright (C) 2007-2010 Marvell International Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/mfd/88pm860x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/mfp.h>
-#include <mach/mfp-pxa930.h>
-#include <mach/pxa95x.h>
-
-#include "generic.h"
-
-#define SAARB_NR_IRQS (IRQ_BOARD_START + 40)
-
-static struct pm860x_touch_pdata saarb_touch = {
- .gpadc_prebias = 1,
- .slot_cycle = 1,
- .tsi_prebias = 6,
- .pen_prebias = 16,
- .pen_prechg = 2,
- .res_x = 300,
-};
-
-static struct pm860x_backlight_pdata saarb_backlight[] = {
- {
- .id = PM8606_ID_BACKLIGHT,
- .iset = PM8606_WLED_CURRENT(24),
- .flags = PM8606_BACKLIGHT1,
- },
- {},
-};
-
-static struct pm860x_led_pdata saarb_led[] = {
- {
- .id = PM8606_ID_LED,
- .iset = PM8606_LED_CURRENT(12),
- .flags = PM8606_LED1_RED,
- }, {
- .id = PM8606_ID_LED,
- .iset = PM8606_LED_CURRENT(12),
- .flags = PM8606_LED1_GREEN,
- }, {
- .id = PM8606_ID_LED,
- .iset = PM8606_LED_CURRENT(12),
- .flags = PM8606_LED1_BLUE,
- }, {
- .id = PM8606_ID_LED,
- .iset = PM8606_LED_CURRENT(12),
- .flags = PM8606_LED2_RED,
- }, {
- .id = PM8606_ID_LED,
- .iset = PM8606_LED_CURRENT(12),
- .flags = PM8606_LED2_GREEN,
- }, {
- .id = PM8606_ID_LED,
- .iset = PM8606_LED_CURRENT(12),
- .flags = PM8606_LED2_BLUE,
- },
-};
-
-static struct pm860x_platform_data saarb_pm8607_info = {
- .touch = &saarb_touch,
- .backlight = &saarb_backlight[0],
- .led = &saarb_led[0],
- .companion_addr = 0x10,
- .irq_mode = 0,
- .irq_base = IRQ_BOARD_START,
-
- .i2c_port = GI2C_PORT,
-};
-
-static struct i2c_board_info saarb_i2c_info[] = {
- {
- .type = "88PM860x",
- .addr = 0x34,
- .platform_data = &saarb_pm8607_info,
- .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
- },
-};
-
-static void __init saarb_init(void)
-{
- pxa_set_ffuart_info(NULL);
- pxa_set_i2c_info(NULL);
- i2c_register_board_info(0, ARRAY_AND_SIZE(saarb_i2c_info));
-}
-
-MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)")
- .atag_offset = 0x100,
- .map_io = pxa3xx_map_io,
- .nr_irqs = SAARB_NR_IRQS,
- .init_irq = pxa95x_init_irq,
- .handle_irq = pxa3xx_handle_irq,
- .timer = &pxa_timer,
- .init_machine = saarb_init,
- .restart = pxa_restart,
-MACHINE_END
-
deleted file mode 100644
@@ -1,136 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/tavorevb3.c
- *
- * Support for the Marvell EVB3 Development Platform.
- *
- * Copyright: (C) Copyright 2008-2010 Marvell International Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pxa-i2c.h>
-#include <linux/gpio.h>
-#include <linux/mfd/88pm860x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/pxa930.h>
-
-#include "devices.h"
-#include "generic.h"
-
-#define TAVOREVB3_NR_IRQS (IRQ_BOARD_START + 24)
-
-static mfp_cfg_t evb3_mfp_cfg[] __initdata = {
- /* UART */
- GPIO53_UART1_TXD,
- GPIO54_UART1_RXD,
-
- /* PMIC */
- PMIC_INT_GPIO83,
-};
-
-#if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
-static struct pm860x_touch_pdata evb3_touch = {
- .gpadc_prebias = 1,
- .slot_cycle = 1,
- .tsi_prebias = 6,
- .pen_prebias = 16,
- .pen_prechg = 2,
- .res_x = 300,
-};
-
-static struct pm860x_backlight_pdata evb3_backlight[] = {
- {
- .id = PM8606_ID_BACKLIGHT,
- .iset = PM8606_WLED_CURRENT(24),
- .flags = PM8606_BACKLIGHT1,
- },
- {},
-};
-
-static struct pm860x_led_pdata evb3_led[] = {
- {
- .id = PM8606_ID_LED,
- .iset = PM8606_LED_CURRENT(12),
- .flags = PM8606_LED1_RED,
- }, {
- .id = PM8606_ID_LED,
- .iset = PM8606_LED_CURRENT(12),
- .flags = PM8606_LED1_GREEN,
- }, {
- .id = PM8606_ID_LED,
- .iset = PM8606_LED_CURRENT(12),
- .flags = PM8606_LED1_BLUE,
- }, {
- .id = PM8606_ID_LED,
- .iset = PM8606_LED_CURRENT(12),
- .flags = PM8606_LED2_RED,
- }, {
- .id = PM8606_ID_LED,
- .iset = PM8606_LED_CURRENT(12),
- .flags = PM8606_LED2_GREEN,
- }, {
- .id = PM8606_ID_LED,
- .iset = PM8606_LED_CURRENT(12),
- .flags = PM8606_LED2_BLUE,
- },
-};
-
-static struct pm860x_platform_data evb3_pm8607_info = {
- .touch = &evb3_touch,
- .backlight = &evb3_backlight[0],
- .led = &evb3_led[0],
- .companion_addr = 0x10,
- .irq_mode = 0,
- .irq_base = IRQ_BOARD_START,
-
- .i2c_port = GI2C_PORT,
-};
-
-static struct i2c_board_info evb3_i2c_info[] = {
- {
- .type = "88PM860x",
- .addr = 0x34,
- .platform_data = &evb3_pm8607_info,
- .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
- },
-};
-
-static void __init evb3_init_i2c(void)
-{
- pxa_set_i2c_info(NULL);
- i2c_register_board_info(0, ARRAY_AND_SIZE(evb3_i2c_info));
-}
-#else
-static inline void evb3_init_i2c(void) {}
-#endif
-
-static void __init evb3_init(void)
-{
- /* initialize MFP configurations */
- pxa3xx_mfp_config(ARRAY_AND_SIZE(evb3_mfp_cfg));
-
- pxa_set_ffuart_info(NULL);
-
- evb3_init_i2c();
-}
-
-MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
- .atag_offset = 0x100,
- .map_io = pxa3xx_map_io,
- .nr_irqs = TAVOREVB3_NR_IRQS,
- .init_irq = pxa3xx_init_irq,
- .handle_irq = pxa3xx_handle_irq,
- .timer = &pxa_timer,
- .init_machine = evb3_init,
- .restart = pxa_restart,
-MACHINE_END
@@ -5,7 +5,6 @@
obj-y := dma.o
obj-$(CONFIG_PXA3xx) += mfp.o
-obj-$(CONFIG_PXA95x) += mfp.o
obj-$(CONFIG_ARCH_MMP) += mfp.o
obj-$(CONFIG_PXA_SSP) += ssp.o
@@ -423,7 +423,7 @@ typedef unsigned long mfp_cfg_t;
((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
(MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
-#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x) || defined(CONFIG_ARCH_MMP)
+#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP)
/*
* each MFP pin will have a MFPR register, since the offset of the
* register varies between processors, the processor specific code
@@ -470,6 +470,6 @@ void mfp_write(int mfp, unsigned long mfpr_val);
void mfp_config(unsigned long *mfp_cfgs, int num);
void mfp_config_run(void);
void mfp_config_lpm(void);
-#endif /* CONFIG_PXA3xx || CONFIG_PXA95x || CONFIG_ARCH_MMP */
+#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */
#endif /* __ASM_PLAT_MFP_H */
@@ -448,7 +448,7 @@ static int pxa_gpio_nums(void)
} else if (cpu_is_pxa27x()) {
count = 120;
gpio_type = PXA27X_GPIO;
- } else if (cpu_is_pxa93x() || cpu_is_pxa95x()) {
+ } else if (cpu_is_pxa93x()) {
count = 191;
gpio_type = PXA93X_GPIO;
} else if (cpu_is_pxa3xx()) {
PXA95x isn't widely used. And it adds the effort on supporting multiple platform. So remove it. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> --- arch/arm/Kconfig | 2 +- arch/arm/mach-pxa/Kconfig | 34 ---- arch/arm/mach-pxa/Makefile | 3 - arch/arm/mach-pxa/clock.h | 2 +- arch/arm/mach-pxa/devices.c | 8 +- arch/arm/mach-pxa/include/mach/hardware.h | 28 --- arch/arm/mach-pxa/include/mach/irqs.h | 1 - arch/arm/mach-pxa/include/mach/pxa3xx.h | 1 - arch/arm/mach-pxa/include/mach/pxa95x.h | 7 - arch/arm/mach-pxa/pxa95x.c | 295 ----------------------------- arch/arm/mach-pxa/saarb.c | 115 ----------- arch/arm/mach-pxa/tavorevb3.c | 136 ------------- arch/arm/plat-pxa/Makefile | 1 - arch/arm/plat-pxa/include/plat/mfp.h | 4 +- drivers/gpio/gpio-pxa.c | 2 +- 15 files changed, 9 insertions(+), 630 deletions(-) delete mode 100644 arch/arm/mach-pxa/include/mach/pxa95x.h delete mode 100644 arch/arm/mach-pxa/pxa95x.c delete mode 100644 arch/arm/mach-pxa/saarb.c delete mode 100644 arch/arm/mach-pxa/tavorevb3.c