From patchwork Fri Nov 16 09:29:09 2012 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Thomas Petazzoni X-Patchwork-Id: 1753791 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-process-083081@patchwork1.kernel.org Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) by patchwork1.kernel.org (Postfix) with ESMTP id 35B523FCDE for ; Fri, 16 Nov 2012 09:32:25 +0000 (UTC) Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.76 #1 (Red Hat Linux)) id 1TZIFk-0003nN-E7; Fri, 16 Nov 2012 09:30:25 +0000 Received: from mail.free-electrons.com ([88.190.12.23]) by merlin.infradead.org with esmtp (Exim 4.76 #1 (Red Hat Linux)) id 1TZIF0-0003Sy-3D for linux-arm-kernel@lists.infradead.org; Fri, 16 Nov 2012 09:29:43 +0000 Received: by mail.free-electrons.com (Postfix, from userid 106) id CD68B147; Fri, 16 Nov 2012 10:29:33 +0100 (CET) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.free-electrons.com X-Spam-Level: X-Spam-Status: No, score=-3.4 required=5.0 tests=ALL_TRUSTED,AWL,BAYES_00 shortcircuit=no autolearn=ham version=3.3.1 Received: from localhost (col31-4-88-188-83-94.fbx.proxad.net [88.188.83.94]) by mail.free-electrons.com (Postfix) with ESMTPSA id A92AE12B; Fri, 16 Nov 2012 10:29:15 +0100 (CET) From: Thomas Petazzoni To: Jason Cooper , Andrew Lunn , Gregory Clement Subject: [PATCH 1/3] net: mvmdio: new Marvell MDIO driver Date: Fri, 16 Nov 2012 10:29:09 +0100 Message-Id: <1353058151-27922-2-git-send-email-thomas.petazzoni@free-electrons.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1353058151-27922-1-git-send-email-thomas.petazzoni@free-electrons.com> References: <1353058151-27922-1-git-send-email-thomas.petazzoni@free-electrons.com> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20121116_042938_684852_C443FAB0 X-CRM114-Status: GOOD ( 27.75 ) X-Spam-Score: -2.6 (--) X-Spam-Report: SpamAssassin version 3.3.2 on merlin.infradead.org summary: Content analysis details: (-2.6 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 SPF_PASS SPF: sender matches SPF record -0.7 RP_MATCHES_RCVD Envelope sender domain matches handover relay domain -1.9 BAYES_00 BODY: Bayes spam probability is 0 to 1% [score: 0.0000] Cc: Lior Amsalem , Maen Suleiman , "David S. Miller" , linux-arm-kernel@lists.infradead.org X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.14 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: linux-arm-kernel-bounces@lists.infradead.org Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org This patch adds a separate driver for the MDIO interface of the Marvell Ethernet controllers. There are two reasons to have a separate driver rather than including it inside the MAC driver itself: *) The MDIO interface is shared by all Ethernet ports, so a driver must guarantee non-concurrent accesses to this MDIO interface. The most logical way is to have a separate driver that handles this single MDIO interface, used by all Ethernet ports. *) The MDIO interface is the same between the existing mv643xx_eth driver and the new mvneta driver. Even though it is for now only used by the mvneta driver, it will in the future be used by the mv643xx_eth driver as well. Signed-off-by: Thomas Petazzoni Acked-by: David S. Miller --- .../devicetree/bindings/net/marvell-orion-mdio.txt | 35 +++ drivers/net/ethernet/marvell/Kconfig | 11 + drivers/net/ethernet/marvell/Makefile | 1 + drivers/net/ethernet/marvell/mvmdio.c | 230 ++++++++++++++++++++ 4 files changed, 277 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/marvell-orion-mdio.txt create mode 100644 drivers/net/ethernet/marvell/mvmdio.c diff --git a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt new file mode 100644 index 0000000..34e7aaf --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt @@ -0,0 +1,35 @@ +* Marvell MDIO Ethernet Controller interface + +The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x, +MV78xx0, Armada 370 and Armada XP have an identical unit that provides +an interface with the MDIO bus. This driver handles this MDIO +interface. + +Required properties: +- compatible: "marvell,orion-mdio" +- reg: address and length of the SMI register + +The child nodes of the MDIO driver are the individual PHY devices +connected to this MDIO bus. They must have a "reg" property given the +PHY address on the MDIO bus. + +Example at the SoC level: + +mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0xd0072004 0x4>; +}; + +And at the board level: + +mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +} diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig index 0029934..232ccb3 100644 --- a/drivers/net/ethernet/marvell/Kconfig +++ b/drivers/net/ethernet/marvell/Kconfig @@ -31,6 +31,17 @@ config MV643XX_ETH Some boards that use the Discovery chipset are the Momenco Ocelot C and Jaguar ATX and Pegasos II. +config MVMDIO + tristate "Marvell MDIO interface support" + ---help--- + This driver supports the MDIO interface found in the network + interface units of the Marvell EBU SoCs (Kirkwood, Orion5x, + Dove, Armada 370 and Armada XP). + + For now, this driver is only needed for the MVNETA driver + (used on Armada 370 and XP), but it could be used in the + future by the MV643XX_ETH driver. + config PXA168_ETH tristate "Marvell pxa168 ethernet support" depends on CPU_PXA168 diff --git a/drivers/net/ethernet/marvell/Makefile b/drivers/net/ethernet/marvell/Makefile index 57e3234..0438599 100644 --- a/drivers/net/ethernet/marvell/Makefile +++ b/drivers/net/ethernet/marvell/Makefile @@ -3,6 +3,7 @@ # obj-$(CONFIG_MV643XX_ETH) += mv643xx_eth.o +obj-$(CONFIG_MVMDIO) += mvmdio.o obj-$(CONFIG_PXA168_ETH) += pxa168_eth.o obj-$(CONFIG_SKGE) += skge.o obj-$(CONFIG_SKY2) += sky2.o diff --git a/drivers/net/ethernet/marvell/mvmdio.c b/drivers/net/ethernet/marvell/mvmdio.c new file mode 100644 index 0000000..82fbd23 --- /dev/null +++ b/drivers/net/ethernet/marvell/mvmdio.c @@ -0,0 +1,230 @@ +/* + * Driver for the MDIO interface of Marvell network interfaces. + * + * Since the MDIO interface of Marvell network interfaces is shared + * between all network interfaces, having a single driver allows to + * handle concurrent accesses properly (you may have four Ethernet + * ports, but they in fact share the same SMI interface to access the + * MDIO bus). Moreover, this MDIO interface code is similar between + * the mv643xx_eth driver and the mvneta driver. For now, it is only + * used by the mvneta driver, but it could later be used by the + * mv643xx_eth driver as well. + * + * Copyright (C) 2012 Marvell + * + * Thomas Petazzoni + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define MVMDIO_SMI_DATA_SHIFT 0 +#define MVMDIO_SMI_PHY_ADDR_SHIFT 16 +#define MVMDIO_SMI_PHY_REG_SHIFT 21 +#define MVMDIO_SMI_READ_OPERATION BIT(26) +#define MVMDIO_SMI_WRITE_OPERATION 0 +#define MVMDIO_SMI_READ_VALID BIT(27) +#define MVMDIO_SMI_BUSY BIT(28) + +struct orion_mdio_dev { + struct mutex lock; + void __iomem *smireg; +}; + +/* + * Wait for the SMI unit to be ready for another operation + */ +static int orion_mdio_wait_ready(struct mii_bus *bus) +{ + struct orion_mdio_dev *dev = bus->priv; + int count; + u32 val; + + count = 0; + while (1) { + val = readl(dev->smireg); + if (!(val & MVMDIO_SMI_BUSY)) + break; + + if (count > 100) { + dev_err(bus->parent, "Timeout: SMI busy for too long\n"); + return -ETIMEDOUT; + } + + udelay(10); + count++; + } + + return 0; +} + +static int orion_mdio_read(struct mii_bus *bus, int mii_id, + int regnum) +{ + struct orion_mdio_dev *dev = bus->priv; + int count; + u32 val; + int ret; + + mutex_lock(&dev->lock); + + ret = orion_mdio_wait_ready(bus); + if (ret < 0) { + mutex_unlock(&dev->lock); + return ret; + } + + writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) | + (regnum << MVMDIO_SMI_PHY_REG_SHIFT) | + MVMDIO_SMI_READ_OPERATION), + dev->smireg); + + /* Wait for the value to become available */ + count = 0; + while (1) { + val = readl(dev->smireg); + if (val & MVMDIO_SMI_READ_VALID) + break; + + if (count > 100) { + dev_err(bus->parent, "Timeout when reading PHY\n"); + mutex_unlock(&dev->lock); + return -ETIMEDOUT; + } + + udelay(10); + count++; + } + + mutex_unlock(&dev->lock); + + return val & 0xFFFF; +} + +static int orion_mdio_write(struct mii_bus *bus, int mii_id, + int regnum, u16 value) +{ + struct orion_mdio_dev *dev = bus->priv; + int ret; + + mutex_lock(&dev->lock); + + ret = orion_mdio_wait_ready(bus); + if (ret < 0) { + mutex_unlock(&dev->lock); + return ret; + } + + writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) | + (regnum << MVMDIO_SMI_PHY_REG_SHIFT) | + MVMDIO_SMI_WRITE_OPERATION | + (value << MVMDIO_SMI_DATA_SHIFT)), + dev->smireg); + + mutex_unlock(&dev->lock); + + return 0; +} + +static int orion_mdio_reset(struct mii_bus *bus) +{ + return 0; +} + +static int __devinit orion_mdio_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct mii_bus *bus; + struct orion_mdio_dev *dev; + int i, ret; + + bus = mdiobus_alloc_size(sizeof(struct orion_mdio_dev)); + if (!bus) { + dev_err(&pdev->dev, "Cannot allocate MDIO bus\n"); + return -ENOMEM; + } + + bus->name = "orion_mdio_bus"; + bus->read = orion_mdio_read; + bus->write = orion_mdio_write; + bus->reset = orion_mdio_reset; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", + dev_name(&pdev->dev)); + bus->parent = &pdev->dev; + + bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); + if (!bus->irq) { + dev_err(&pdev->dev, "Cannot allocate PHY IRQ array\n"); + mdiobus_free(bus); + return -ENOMEM; + } + + for (i = 0; i < PHY_MAX_ADDR; i++) + bus->irq[i] = PHY_POLL; + + dev = bus->priv; + dev->smireg = of_iomap(pdev->dev.of_node, 0); + if (!dev->smireg) { + dev_err(&pdev->dev, "No SMI register address given in DT\n"); + kfree(bus->irq); + mdiobus_free(bus); + return -ENODEV; + } + + mutex_init(&dev->lock); + + ret = of_mdiobus_register(bus, np); + if (ret < 0) { + dev_err(&pdev->dev, "Cannot register MDIO bus (%d)\n", ret); + iounmap(dev->smireg); + kfree(bus->irq); + mdiobus_free(bus); + return ret; + } + + platform_set_drvdata(pdev, bus); + + return 0; +} + +static int __devexit orion_mdio_remove(struct platform_device *pdev) +{ + struct mii_bus *bus = platform_get_drvdata(pdev); + mdiobus_unregister(bus); + kfree(bus->irq); + mdiobus_free(bus); + return 0; +} + +static const struct of_device_id orion_mdio_match[] = { + { .compatible = "marvell,orion-mdio" }, + { } +}; +MODULE_DEVICE_TABLE(of, orion_mdio_match); + +static struct platform_driver orion_mdio_driver = { + .probe = orion_mdio_probe, + .remove = __devexit_p(orion_mdio_remove), + .driver = { + .name = "orion-mdio", + .of_match_table = orion_mdio_match, + }, +}; + +module_platform_driver(orion_mdio_driver); + +MODULE_DESCRIPTION("Marvell MDIO interface driver"); +MODULE_AUTHOR("Thomas Petazzoni "); +MODULE_LICENSE("GPL");