[1/3] ARM: tegra: tamonten: Add host1x support

Commit Message

Thierry Reding Nov. 16, 2012, 3:56 p.m. UTC

Hook up the required regulators, I2C DDC adapter and hotplug detect GPIO
to the Tamonten HDMI output. Carrier boards still need to explicitly
enable the output to use it.

Signed-off-by: Thierry Reding <[e-mail]>
---
 arch/arm/boot/dts/tegra20-tamonten.dtsi | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

Patch

diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index 95df80e..a239ccd 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -8,6 +8,16 @@ 
 		reg = <0x00000000 0x20000000>;
 	};
 
+	host1x {
+		hdmi {
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+		};
+	};
+
 	pinmux {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -292,7 +302,7 @@ 
 		pinctrl-1 = <&state_i2cmux_pta>;
 		pinctrl-2 = <&state_i2cmux_idle>;
 
-		i2c@0 {
+		hdmi_ddc: i2c@0 {
 			reg = <0>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -407,13 +417,13 @@ 
 					regulator-max-microvolt = <2850000>;
 				};
 
-				ldo7 {
+				hdmi_vdd_reg: ldo7 {
 					regulator-name = "vdd_ldo7,avdd_hdmi";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 				};
 
-				ldo8 {
+				hdmi_pll_reg: ldo8 {
 					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;