@@ -4,6 +4,7 @@ ifeq ($(CONFIG_OF),y)
# rm9200
dtb-$(CONFIG_ARCH_AT91) += at91rm9200ek.dtb
# sam9260
+dtb-$(CONFIG_ARCH_AT91) += animeo_ip.dtb
dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb
dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb
dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb
new file mode 100644
@@ -0,0 +1,166 @@
+/*
+ * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards
+ *
+ * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 only.
+ */
+
+/dts-v1/;
+/include/ "at91sam9260.dtsi"
+
+/ {
+ model = "Somfy Animeo IP";
+ compatible = "somfy,animeo-ip", "atmel,at91sam9260", "atmel,at91sam9";
+
+ aliases {
+ serial0 = &usart1;
+ serial1 = &usart2;
+ serial2 = &usart0;
+ serial3 = &dbgu;
+ serial4 = &usart3;
+ serial5 = &uart0;
+ serial6 = &uart1;
+ };
+
+ chosen {
+ linux,stdout-path = &usart2;
+ };
+
+ memory {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ main_clock: clock@0 {
+ compatible = "atmel,osc", "fixed-clock";
+ clock-frequency = <18432000>;
+ };
+ };
+
+ ahb {
+ apb {
+ usart0: serial@fffb0000 {
+ pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>;
+ linux,rs485-enabled-at-boot-time;
+ status = "okay";
+ };
+
+ usart1: serial@fffb4000 {
+ pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts>;
+ linux,rs485-enabled-at-boot-time;
+ status = "okay";
+ };
+
+ usart2: serial@fffb8000 {
+ pinctrl-0 = <&pinctrl_usart2>;
+ status = "okay";
+ };
+
+ macb0: ethernet@fffc4000 {
+ pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii>;
+ phy-mode = "mii";
+ status = "okay";
+ };
+ };
+
+ nand0: nand@40000000 {
+ nand-bus-width = <8>;
+ nand-ecc-mode = "soft";
+ nand-on-flash-bbt;
+ status = "okay";
+
+ at91bootstrap@0 {
+ label = "at91bootstrap";
+ reg = <0x0 0x8000>;
+ };
+
+ barebox@8000 {
+ label = "barebox";
+ reg = <0x8000 0x40000>;
+ };
+
+ bareboxenv@48000 {
+ label = "bareboxenv";
+ reg = <0x48000 0x8000>;
+ };
+
+ user_block@0x50000 {
+ label = "user_block";
+ reg = <0x50000 0xb0000>;
+ };
+
+ kernel@100000 {
+ label = "kernel";
+ reg = <0x100000 0x1b0000>;
+ };
+
+ root@2b0000 {
+ label = "root";
+ reg = <0x2b0000 0x1D50000>;
+ };
+ };
+
+ usb0: ohci@00500000 {
+ num-ports = <2>;
+ atmel,vbus-gpio = <&pioB 15 1>;
+ status = "okay";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power_green {
+ label = "power_green";
+ gpios = <&pioC 17 0>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ power_red {
+ label = "power_red";
+ gpios = <&pioA 2 0>;
+ };
+
+ tx_green {
+ label = "tx_green";
+ gpios = <&pioC 19 0>;
+ };
+
+ tx_red {
+ label = "tx_red";
+ gpios = <&pioC 18 0>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ keyswitch_in {
+ label = "keyswitch_in";
+ gpios = <&pioB 1 0>;
+ linux,code = <28>;
+ gpio-key,wakeup;
+ };
+
+ error_in {
+ label = "error_in";
+ gpios = <&pioB 2 0>;
+ linux,code = <29>;
+ gpio-key,wakeup;
+ };
+
+ btn {
+ label = "btn";
+ gpios = <&pioC 23 0>;
+ linux,code = <31>;
+ gpio-key,wakeup;
+ };
+ };
+};
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Sylvain FARGIER <sylvain.fargier@somfy.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/animeo_ip.dts | 166 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 167 insertions(+) create mode 100644 arch/arm/boot/dts/animeo_ip.dts