diff mbox

[3/3,v3] clk: move IM-PD1 clocks to drivers/clk

Message ID 1353447589-12947-1-git-send-email-linus.walleij@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Linus Walleij Nov. 20, 2012, 9:39 p.m. UTC
The ARM IM-PD1 add-on module has a few clock of its own, let's
move also these down to the drivers/clk/versatile driver dir
and get rid of any remaining oldschool Integrator clocks.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- add GPL header
ChangeLov v2->v3:
- Provide exitpath, provide handling of multiple LMs
  use new ICST VCO infrastructure.
---
 arch/arm/mach-integrator/impd1.c             | 69 +-------------------
 drivers/clk/versatile/Makefile               |  1 +
 drivers/clk/versatile/clk-impd1.c            | 97 ++++++++++++++++++++++++++++
 include/linux/platform_data/clk-integrator.h |  2 +
 4 files changed, 103 insertions(+), 66 deletions(-)
 create mode 100644 drivers/clk/versatile/clk-impd1.c

Comments

Mike Turquette Nov. 21, 2012, 7:10 p.m. UTC | #1
Quoting Linus Walleij (2012-11-20 13:39:49)
> The ARM IM-PD1 add-on module has a few clock of its own, let's
> move also these down to the drivers/clk/versatile driver dir
> and get rid of any remaining oldschool Integrator clocks.
> 
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

I replaced the v2 version in clk-next with this one.  Thanks for the
quick updates.

Regards,
Mike

> ---
> ChangeLog v1->v2:
> - add GPL header
> ChangeLov v2->v3:
> - Provide exitpath, provide handling of multiple LMs
>   use new ICST VCO infrastructure.
> ---
>  arch/arm/mach-integrator/impd1.c             | 69 +-------------------
>  drivers/clk/versatile/Makefile               |  1 +
>  drivers/clk/versatile/clk-impd1.c            | 97 ++++++++++++++++++++++++++++
>  include/linux/platform_data/clk-integrator.h |  2 +
>  4 files changed, 103 insertions(+), 66 deletions(-)
>  create mode 100644 drivers/clk/versatile/clk-impd1.c
> 
> diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
> index e428f3a..b3d86d7 100644
> --- a/arch/arm/mach-integrator/impd1.c
> +++ b/arch/arm/mach-integrator/impd1.c
> @@ -21,10 +21,9 @@
>  #include <linux/amba/bus.h>
>  #include <linux/amba/clcd.h>
>  #include <linux/io.h>
> +#include <linux/platform_data/clk-integrator.h>
>  #include <linux/slab.h>
> -#include <linux/clkdev.h>
>  
> -#include <asm/hardware/icst.h>
>  #include <mach/lm.h>
>  #include <mach/impd1.h>
>  #include <asm/sizes.h>
> @@ -36,45 +35,6 @@ MODULE_PARM_DESC(lmid, "logic module stack position");
>  
>  struct impd1_module {
>         void __iomem    *base;
> -       struct clk      vcos[2];
> -       struct clk_lookup *clks[3];
> -};
> -
> -static const struct icst_params impd1_vco_params = {
> -       .ref            = 24000000,     /* 24 MHz */
> -       .vco_max        = ICST525_VCO_MAX_3V,
> -       .vco_min        = ICST525_VCO_MIN,
> -       .vd_min         = 12,
> -       .vd_max         = 519,
> -       .rd_min         = 3,
> -       .rd_max         = 120,
> -       .s2div          = icst525_s2div,
> -       .idx2s          = icst525_idx2s,
> -};
> -
> -static void impd1_setvco(struct clk *clk, struct icst_vco vco)
> -{
> -       struct impd1_module *impd1 = clk->data;
> -       u32 val = vco.v | (vco.r << 9) | (vco.s << 16);
> -
> -       writel(0xa05f, impd1->base + IMPD1_LOCK);
> -       writel(val, clk->vcoreg);
> -       writel(0, impd1->base + IMPD1_LOCK);
> -
> -#ifdef DEBUG
> -       vco.v = val & 0x1ff;
> -       vco.r = (val >> 9) & 0x7f;
> -       vco.s = (val >> 16) & 7;
> -
> -       pr_debug("IM-PD1: VCO%d clock is %ld Hz\n",
> -                vconr, icst525_hz(&impd1_vco_params, vco));
> -#endif
> -}
> -
> -static const struct clk_ops impd1_clk_ops = {
> -       .round  = icst_clk_round,
> -       .set    = icst_clk_set,
> -       .setvco = impd1_setvco,
>  };
>  
>  void impd1_tweak_control(struct device *dev, u32 mask, u32 val)
> @@ -344,10 +304,6 @@ static struct impd1_device impd1_devs[] = {
>         }
>  };
>  
> -static struct clk fixed_14745600 = {
> -       .rate = 14745600,
> -};
> -
>  static int impd1_probe(struct lm_device *dev)
>  {
>         struct impd1_module *impd1;
> @@ -376,23 +332,7 @@ static int impd1_probe(struct lm_device *dev)
>         printk("IM-PD1 found at 0x%08lx\n",
>                 (unsigned long)dev->resource.start);
>  
> -       for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
> -               impd1->vcos[i].ops = &impd1_clk_ops,
> -               impd1->vcos[i].owner = THIS_MODULE,
> -               impd1->vcos[i].params = &impd1_vco_params,
> -               impd1->vcos[i].data = impd1;
> -       }
> -       impd1->vcos[0].vcoreg = impd1->base + IMPD1_OSC1;
> -       impd1->vcos[1].vcoreg = impd1->base + IMPD1_OSC2;
> -
> -       impd1->clks[0] = clkdev_alloc(&impd1->vcos[0], NULL, "lm%x:01000",
> -                                       dev->id);
> -       impd1->clks[1] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00100",
> -                                       dev->id);
> -       impd1->clks[2] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00200",
> -                                       dev->id);
> -       for (i = 0; i < ARRAY_SIZE(impd1->clks); i++)
> -               clkdev_add(impd1->clks[i]);
> +       integrator_impd1_clk_init(impd1->base, dev->id);
>  
>         for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) {
>                 struct impd1_device *idev = impd1_devs + i;
> @@ -431,12 +371,9 @@ static int impd1_remove_one(struct device *dev, void *data)
>  static void impd1_remove(struct lm_device *dev)
>  {
>         struct impd1_module *impd1 = lm_get_drvdata(dev);
> -       int i;
>  
>         device_for_each_child(&dev->dev, NULL, impd1_remove_one);
> -
> -       for (i = 0; i < ARRAY_SIZE(impd1->clks); i++)
> -               clkdev_drop(impd1->clks[i]);
> +       integrator_impd1_clk_exit(dev->id);
>  
>         lm_set_drvdata(dev, NULL);
>  
> diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile
> index c0a0f64..884e362 100644
> --- a/drivers/clk/versatile/Makefile
> +++ b/drivers/clk/versatile/Makefile
> @@ -1,4 +1,5 @@
>  # Makefile for Versatile-specific clocks
>  obj-$(CONFIG_ICST)             += clk-icst.o
>  obj-$(CONFIG_ARCH_INTEGRATOR)  += clk-integrator.o
> +obj-$(CONFIG_INTEGRATOR_IMPD1) += clk-impd1.o
>  obj-$(CONFIG_ARCH_REALVIEW)    += clk-realview.o
> diff --git a/drivers/clk/versatile/clk-impd1.c b/drivers/clk/versatile/clk-impd1.c
> new file mode 100644
> index 0000000..369139a
> --- /dev/null
> +++ b/drivers/clk/versatile/clk-impd1.c
> @@ -0,0 +1,97 @@
> +/*
> + * Clock driver for the ARM Integrator/IM-PD1 board
> + * Copyright (C) 2012 Linus Walleij
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +#include <linux/clk-provider.h>
> +#include <linux/clk.h>
> +#include <linux/clkdev.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/platform_data/clk-integrator.h>
> +
> +#include <mach/impd1.h>
> +
> +#include "clk-icst.h"
> +
> +struct impd1_clk {
> +       struct clk *vcoclk;
> +       struct clk *uartclk;
> +       struct clk_lookup *clks[3];
> +};
> +
> +static struct impd1_clk impd1_clks[4];
> +
> +/*
> + * There are two VCO's on the IM-PD1 but only one is used by the
> + * kernel, that is why we are only implementing the control of
> + * IMPD1_OSC1 here.
> + */
> +
> +static const struct icst_params impd1_vco_params = {
> +       .ref            = 24000000,     /* 24 MHz */
> +       .vco_max        = ICST525_VCO_MAX_3V,
> +       .vco_min        = ICST525_VCO_MIN,
> +       .vd_min         = 12,
> +       .vd_max         = 519,
> +       .rd_min         = 3,
> +       .rd_max         = 120,
> +       .s2div          = icst525_s2div,
> +       .idx2s          = icst525_idx2s,
> +};
> +
> +static const struct clk_icst_desc impd1_icst1_desc = {
> +       .params = &impd1_vco_params,
> +       .vco_offset = IMPD1_OSC1,
> +       .lock_offset = IMPD1_LOCK,
> +};
> +
> +/**
> + * integrator_impd1_clk_init() - set up the integrator clock tree
> + * @base: base address of the logic module (LM)
> + * @id: the ID of this LM
> + */
> +void integrator_impd1_clk_init(void __iomem *base, unsigned int id)
> +{
> +       struct impd1_clk *imc;
> +       struct clk *clk;
> +       int i;
> +
> +       if (id > 3) {
> +               pr_crit("no more than 4 LMs can be attached\n");
> +               return;
> +       }
> +       imc = &impd1_clks[id];
> +
> +       clk = icst_clk_register(NULL, &impd1_icst1_desc, base);
> +       imc->vcoclk = clk;
> +       imc->clks[0] = clkdev_alloc(clk, NULL, "lm%x:01000", id);
> +
> +       /* UART reference clock */
> +       clk = clk_register_fixed_rate(NULL, "uartclk", NULL, CLK_IS_ROOT,
> +                               14745600);
> +       imc->uartclk = clk;
> +       imc->clks[1] = clkdev_alloc(clk, NULL, "lm%x:00100", id);
> +       imc->clks[2] = clkdev_alloc(clk, NULL, "lm%x:00200", id);
> +
> +       for (i = 0; i < ARRAY_SIZE(imc->clks); i++)
> +               clkdev_add(imc->clks[i]);
> +}
> +
> +void integrator_impd1_clk_exit(unsigned int id)
> +{
> +       int i;
> +       struct impd1_clk *imc;
> +
> +       if (id > 3)
> +               return;
> +       imc = &impd1_clks[id];
> +
> +       for (i = 0; i < ARRAY_SIZE(imc->clks); i++)
> +               clkdev_drop(imc->clks[i]);
> +       clk_unregister(imc->uartclk);
> +       clk_unregister(imc->vcoclk);
> +}
> diff --git a/include/linux/platform_data/clk-integrator.h b/include/linux/platform_data/clk-integrator.h
> index 83fe9c2..280edac 100644
> --- a/include/linux/platform_data/clk-integrator.h
> +++ b/include/linux/platform_data/clk-integrator.h
> @@ -1 +1,3 @@
>  void integrator_clk_init(bool is_cp);
> +void integrator_impd1_clk_init(void __iomem *base, unsigned int id);
> +void integrator_impd1_clk_exit(unsigned int id);
> -- 
> 1.7.11.7
diff mbox

Patch

diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index e428f3a..b3d86d7 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -21,10 +21,9 @@ 
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 #include <linux/io.h>
+#include <linux/platform_data/clk-integrator.h>
 #include <linux/slab.h>
-#include <linux/clkdev.h>
 
-#include <asm/hardware/icst.h>
 #include <mach/lm.h>
 #include <mach/impd1.h>
 #include <asm/sizes.h>
@@ -36,45 +35,6 @@  MODULE_PARM_DESC(lmid, "logic module stack position");
 
 struct impd1_module {
 	void __iomem	*base;
-	struct clk	vcos[2];
-	struct clk_lookup *clks[3];
-};
-
-static const struct icst_params impd1_vco_params = {
-	.ref		= 24000000,	/* 24 MHz */
-	.vco_max	= ICST525_VCO_MAX_3V,
-	.vco_min	= ICST525_VCO_MIN,
-	.vd_min		= 12,
-	.vd_max		= 519,
-	.rd_min		= 3,
-	.rd_max		= 120,
-	.s2div		= icst525_s2div,
-	.idx2s		= icst525_idx2s,
-};
-
-static void impd1_setvco(struct clk *clk, struct icst_vco vco)
-{
-	struct impd1_module *impd1 = clk->data;
-	u32 val = vco.v | (vco.r << 9) | (vco.s << 16);
-
-	writel(0xa05f, impd1->base + IMPD1_LOCK);
-	writel(val, clk->vcoreg);
-	writel(0, impd1->base + IMPD1_LOCK);
-
-#ifdef DEBUG
-	vco.v = val & 0x1ff;
-	vco.r = (val >> 9) & 0x7f;
-	vco.s = (val >> 16) & 7;
-
-	pr_debug("IM-PD1: VCO%d clock is %ld Hz\n",
-		 vconr, icst525_hz(&impd1_vco_params, vco));
-#endif
-}
-
-static const struct clk_ops impd1_clk_ops = {
-	.round	= icst_clk_round,
-	.set	= icst_clk_set,
-	.setvco	= impd1_setvco,
 };
 
 void impd1_tweak_control(struct device *dev, u32 mask, u32 val)
@@ -344,10 +304,6 @@  static struct impd1_device impd1_devs[] = {
 	}
 };
 
-static struct clk fixed_14745600 = {
-	.rate = 14745600,
-};
-
 static int impd1_probe(struct lm_device *dev)
 {
 	struct impd1_module *impd1;
@@ -376,23 +332,7 @@  static int impd1_probe(struct lm_device *dev)
 	printk("IM-PD1 found at 0x%08lx\n",
 		(unsigned long)dev->resource.start);
 
-	for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
-		impd1->vcos[i].ops = &impd1_clk_ops,
-		impd1->vcos[i].owner = THIS_MODULE,
-		impd1->vcos[i].params = &impd1_vco_params,
-		impd1->vcos[i].data = impd1;
-	}
-	impd1->vcos[0].vcoreg = impd1->base + IMPD1_OSC1;
-	impd1->vcos[1].vcoreg = impd1->base + IMPD1_OSC2;
-
-	impd1->clks[0] = clkdev_alloc(&impd1->vcos[0], NULL, "lm%x:01000",
-					dev->id);
-	impd1->clks[1] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00100",
-					dev->id);
-	impd1->clks[2] = clkdev_alloc(&fixed_14745600, NULL, "lm%x:00200",
-					dev->id);
-	for (i = 0; i < ARRAY_SIZE(impd1->clks); i++)
-		clkdev_add(impd1->clks[i]);
+	integrator_impd1_clk_init(impd1->base, dev->id);
 
 	for (i = 0; i < ARRAY_SIZE(impd1_devs); i++) {
 		struct impd1_device *idev = impd1_devs + i;
@@ -431,12 +371,9 @@  static int impd1_remove_one(struct device *dev, void *data)
 static void impd1_remove(struct lm_device *dev)
 {
 	struct impd1_module *impd1 = lm_get_drvdata(dev);
-	int i;
 
 	device_for_each_child(&dev->dev, NULL, impd1_remove_one);
-
-	for (i = 0; i < ARRAY_SIZE(impd1->clks); i++)
-		clkdev_drop(impd1->clks[i]);
+	integrator_impd1_clk_exit(dev->id);
 
 	lm_set_drvdata(dev, NULL);
 
diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile
index c0a0f64..884e362 100644
--- a/drivers/clk/versatile/Makefile
+++ b/drivers/clk/versatile/Makefile
@@ -1,4 +1,5 @@ 
 # Makefile for Versatile-specific clocks
 obj-$(CONFIG_ICST)		+= clk-icst.o
 obj-$(CONFIG_ARCH_INTEGRATOR)	+= clk-integrator.o
+obj-$(CONFIG_INTEGRATOR_IMPD1)	+= clk-impd1.o
 obj-$(CONFIG_ARCH_REALVIEW)	+= clk-realview.o
diff --git a/drivers/clk/versatile/clk-impd1.c b/drivers/clk/versatile/clk-impd1.c
new file mode 100644
index 0000000..369139a
--- /dev/null
+++ b/drivers/clk/versatile/clk-impd1.c
@@ -0,0 +1,97 @@ 
+/*
+ * Clock driver for the ARM Integrator/IM-PD1 board
+ * Copyright (C) 2012 Linus Walleij
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_data/clk-integrator.h>
+
+#include <mach/impd1.h>
+
+#include "clk-icst.h"
+
+struct impd1_clk {
+	struct clk *vcoclk;
+	struct clk *uartclk;
+	struct clk_lookup *clks[3];
+};
+
+static struct impd1_clk impd1_clks[4];
+
+/*
+ * There are two VCO's on the IM-PD1 but only one is used by the
+ * kernel, that is why we are only implementing the control of
+ * IMPD1_OSC1 here.
+ */
+
+static const struct icst_params impd1_vco_params = {
+	.ref		= 24000000,	/* 24 MHz */
+	.vco_max	= ICST525_VCO_MAX_3V,
+	.vco_min	= ICST525_VCO_MIN,
+	.vd_min		= 12,
+	.vd_max		= 519,
+	.rd_min		= 3,
+	.rd_max		= 120,
+	.s2div		= icst525_s2div,
+	.idx2s		= icst525_idx2s,
+};
+
+static const struct clk_icst_desc impd1_icst1_desc = {
+	.params = &impd1_vco_params,
+	.vco_offset = IMPD1_OSC1,
+	.lock_offset = IMPD1_LOCK,
+};
+
+/**
+ * integrator_impd1_clk_init() - set up the integrator clock tree
+ * @base: base address of the logic module (LM)
+ * @id: the ID of this LM
+ */
+void integrator_impd1_clk_init(void __iomem *base, unsigned int id)
+{
+	struct impd1_clk *imc;
+	struct clk *clk;
+	int i;
+
+	if (id > 3) {
+		pr_crit("no more than 4 LMs can be attached\n");
+		return;
+	}
+	imc = &impd1_clks[id];
+
+	clk = icst_clk_register(NULL, &impd1_icst1_desc, base);
+	imc->vcoclk = clk;
+	imc->clks[0] = clkdev_alloc(clk, NULL, "lm%x:01000", id);
+
+	/* UART reference clock */
+	clk = clk_register_fixed_rate(NULL, "uartclk", NULL, CLK_IS_ROOT,
+				14745600);
+	imc->uartclk = clk;
+	imc->clks[1] = clkdev_alloc(clk, NULL, "lm%x:00100", id);
+	imc->clks[2] = clkdev_alloc(clk, NULL, "lm%x:00200", id);
+
+	for (i = 0; i < ARRAY_SIZE(imc->clks); i++)
+		clkdev_add(imc->clks[i]);
+}
+
+void integrator_impd1_clk_exit(unsigned int id)
+{
+	int i;
+	struct impd1_clk *imc;
+
+	if (id > 3)
+		return;
+	imc = &impd1_clks[id];
+
+	for (i = 0; i < ARRAY_SIZE(imc->clks); i++)
+		clkdev_drop(imc->clks[i]);
+	clk_unregister(imc->uartclk);
+	clk_unregister(imc->vcoclk);
+}
diff --git a/include/linux/platform_data/clk-integrator.h b/include/linux/platform_data/clk-integrator.h
index 83fe9c2..280edac 100644
--- a/include/linux/platform_data/clk-integrator.h
+++ b/include/linux/platform_data/clk-integrator.h
@@ -1 +1,3 @@ 
 void integrator_clk_init(bool is_cp);
+void integrator_impd1_clk_init(void __iomem *base, unsigned int id);
+void integrator_impd1_clk_exit(unsigned int id);