@@ -136,6 +136,53 @@ struct mv_usb2_phy *mv_usb2_get_phy(void)
}
EXPORT_SYMBOL(mv_usb2_get_phy);
+int mv_usb2_register_notifier(struct mv_usb2_phy *phy,
+ struct notifier_block *nb)
+{
+ int ret;
+
+ if (!phy)
+ return -ENODEV;
+
+ ret = atomic_notifier_chain_register(phy->extern_chip.head, nb);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+EXPORT_SYMBOL(mv_usb2_register_notifier);
+
+int mv_usb2_unregister_notifier(struct mv_usb2_phy *phy,
+ struct notifier_block *nb)
+{
+ int ret;
+
+ if (!phy)
+ return -ENODEV;
+
+ ret = atomic_notifier_chain_unregister(phy->extern_chip.head, nb);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+EXPORT_SYMBOL(mv_usb2_unregister_notifier);
+
+int mv_usb2_notify(struct mv_usb2_phy *phy, unsigned long val, void *v)
+{
+ int ret;
+
+ if (!phy)
+ return -ENODEV;
+
+ ret = atomic_notifier_call_chain(phy->extern_chip.head, val, v);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+EXPORT_SYMBOL(mv_usb2_notify);
+
static unsigned int u2o_get(void __iomem *base, unsigned int offset)
{
return readl_relaxed(base + offset);
@@ -414,6 +461,13 @@ static int __devinit usb_phy_probe(struct platform_device *pdev)
mv_phy->init = usb_phy_init;
mv_phy->shutdown = usb_phy_shutdown;
+ mv_phy->extern_chip.head = devm_kzalloc(&pdev->dev,
+ sizeof(*mv_phy->extern_chip.head),
+ GFP_KERNEL);
+ if (mv_phy->extern_chip.head == NULL)
+ return -ENOMEM;
+ ATOMIC_INIT_NOTIFIER_HEAD(mv_phy->extern_chip.head);
+
platform_set_drvdata(pdev, mv_phy);
the_phy = mv_phy;
@@ -28,16 +28,13 @@ enum {
VBUS_HIGH = 1 << 0,
};
-struct mv_usb_addon_irq {
- unsigned int irq;
- int (*poll)(void);
-};
-
+#define MV_USB_HAS_VBUS_DETECTION (1 << 0)
+#define MV_USB_HAS_IDPIN_DETECTION (1 << 1)
struct mv_usb_platform_data {
unsigned int clknum;
char **clkname;
- struct mv_usb_addon_irq *id; /* Only valid for OTG. ID pin change*/
- struct mv_usb_addon_irq *vbus; /* valid for OTG/UDC. VBUS change*/
+
+ unsigned int extern_attr;
/* only valid for HCD. OTG or Host only*/
unsigned int mode;
@@ -45,9 +42,7 @@ struct mv_usb_platform_data {
/* This flag is used for that needs id pin checked by otg */
unsigned int disable_otg_clock_gating:1;
/* Force a_bus_req to be asserted */
- unsigned int otg_force_a_bus_req:1;
-
- int (*set_vbus)(unsigned int vbus);
+ unsigned int otg_force_a_bus_req:1;
};
struct mv_usb_phy_platform_data {
@@ -17,6 +17,33 @@
#include <linux/clk.h>
+enum {
+ EVENT_VBUS,
+ EVENT_ID,
+};
+
+struct pxa_usb_vbus_ops {
+ int (*get_vbus)(unsigned int *level);
+ int (*set_vbus)(unsigned int level);
+ int (*init)(void);
+};
+
+struct pxa_usb_idpin_ops {
+ int (*get_idpin)(unsigned int *level);
+ int (*init)(void);
+};
+
+struct pxa_usb_extern_ops {
+ struct pxa_usb_vbus_ops vbus;
+ struct pxa_usb_idpin_ops idpin;
+};
+
+struct mv_usb2_extern_chip {
+ unsigned int id;
+ struct pxa_usb_extern_ops ops;
+ struct atomic_notifier_head *head;
+};
+
struct mv_usb2_phy {
struct platform_device *pdev;
struct mutex phy_lock;
@@ -26,10 +53,45 @@ struct mv_usb2_phy {
struct clk **clks;
unsigned int clks_num;
+ struct mv_usb2_extern_chip extern_chip;
+
int (*init)(struct mv_usb2_phy *mv_phy);
void (*shutdown)(struct mv_usb2_phy *mv_phy);
};
struct mv_usb2_phy *mv_usb2_get_phy(void);
+#define mv_usb2_has_extern_call(phy, o, f, arg...)( \
+{ \
+ int ret; \
+ ret = (!phy ? 0 : ((phy->extern_chip.ops.o.f) ? \
+ 1 : 0)); \
+ ret; \
+} \
+)
+
+#define mv_usb2_extern_call(phy, o, f, args...)( \
+{ \
+ int ret; \
+ ret = (!phy ? -ENODEV : ((phy->extern_chip.ops.o.f) ? \
+ phy->extern_chip.ops.o.f(args) : -ENOIOCTLCMD));\
+ ret; \
+} \
+)
+
+#define mv_usb2_set_extern_call(phy, o, f, p)( \
+{ \
+ int ret; \
+ ret = !phy ? -ENODEV : ((phy->extern_chip.ops.o.f) ? \
+ -EINVAL : ({phy->extern_chip.ops.o.f = p; 0; })); \
+ ret; \
+} \
+)
+
+extern int mv_usb2_register_notifier(struct mv_usb2_phy *phy,
+ struct notifier_block *nb);
+extern int mv_usb2_unregister_notifier(struct mv_usb2_phy *phy,
+ struct notifier_block *nb);
+extern int mv_usb2_notify(struct mv_usb2_phy *phy, unsigned long val, void *v);
+
#endif
For the vbus and idpin detection. It may be completed by some external chip, for example the pmic chip 88pm860x in driver/mfd can do it. Although the usb controller can detect the vbus and id pin, but it need clock on and PHY enabled to detect the vbus/idpin. It will increase the power. Using the external chip to detect vbus/idpin can save the power. Signed-off-by: Chao Xie <chao.xie@marvell.com> --- drivers/usb/phy/mv_usb2_phy.c | 54 +++++++++++++++++++++++++++++ include/linux/platform_data/mv_usb.h | 15 +++----- include/linux/usb/mv_usb2.h | 62 ++++++++++++++++++++++++++++++++++ 3 files changed, 121 insertions(+), 10 deletions(-)