diff mbox

[1/9] ARM: PRIMA2: add CSR SiRFmarco device tree .dts

Message ID 1356005639-23466-2-git-send-email-Barry.Song@csr.com (mailing list archive)
State New, archived
Headers show

Commit Message

Barry Song Dec. 20, 2012, 12:13 p.m. UTC 
From: Barry Song <Baohua.Song@csr.com>

SiRFmarco is a dual-core cortex-a9 SMP SoC from CSR. this patch
adds the .dtsi and a basic evb board .dts for it.

Signed-off-by: Barry Song <Baohua.Song@csr.com>
---
 arch/arm/boot/dts/marco-evb.dts |   51 +++
 arch/arm/boot/dts/marco.dtsi    |  749 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 800 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boot/dts/marco-evb.dts
 create mode 100644 arch/arm/boot/dts/marco.dtsi

Comments

Mark Rutland Jan. 2, 2013, 12:19 p.m. UTC | #1 
On Thu, Dec 20, 2012 at 12:13:51PM +0000, Barry Song wrote:
> From: Barry Song <Baohua.Song@csr.com>
> 
> SiRFmarco is a dual-core cortex-a9 SMP SoC from CSR. this patch
> adds the .dtsi and a basic evb board .dts for it.
> 
> Signed-off-by: Barry Song <Baohua.Song@csr.com>
> ---
>  arch/arm/boot/dts/marco-evb.dts |   51 +++
>  arch/arm/boot/dts/marco.dtsi    |  749 +++++++++++++++++++++++++++++++++++++++
>  2 files changed, 800 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/boot/dts/marco-evb.dts
>  create mode 100644 arch/arm/boot/dts/marco.dtsi

[...]

> diff --git a/arch/arm/boot/dts/marco.dtsi b/arch/arm/boot/dts/marco.dtsi
> new file mode 100644
> index 0000000..00b5eb7
> --- /dev/null
> +++ b/arch/arm/boot/dts/marco.dtsi
> @@ -0,0 +1,749 @@
> +/*
> + * DTS file for CSR SiRFmarco SoC
> + *
> + * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
> + *
> + * Licensed under GPLv2 or later.
> + */
> +
> +/include/ "skeleton.dtsi"
> +/ {
> +       compatible = "sirf,marco";
> +       #address-cells = <1>;
> +       #size-cells = <1>;
> +       interrupt-parent = <&gic>;
> +
> +       cpus {
> +               cpu@0 {
> +                       compatible = "arm,cortex-a9";
> +               };
> +               cpu@1 {
> +                       compatible = "arm,cortex-a9";
> +               };
> +       };

It would be good if the cpu nodes had their reg property set, so the logical
map can be populated. They should also have their device_type set to "cpu".

> +
> +       axi {
> +               compatible = "simple-bus";
> +               #address-cells = <1>;
> +               #size-cells = <1>;
> +               ranges = <0x40000000 0x40000000 0xa0000000>;
> +
> +               l2-cache-controller@c0030000 {
> +                       compatible = "arm,pl310-cache", "sirf,marco-pl310-cache";

I believe the order of these should be swapped such that the most specific
match comes first.

> +                       reg = <0xc0030000 0x1000>;
> +                       interrupts = <0 59 0>;
> +                       arm,tag-latency = <1 1 1>;
> +                       arm,data-latency = <1 1 1>;
> +                       arm,filter-ranges = <0x40000000 0x80000000>;
> +               };

[...]

> +               peri-iobg {
> +                       compatible = "simple-bus";
> +                       #address-cells = <1>;
> +                       #size-cells = <1>;
> +                       ranges = <0xcc000000 0xcc000000 0x2000000>;
> +
> +                       timer@cc020000 {
> +                               compatible = "sirf,marco-tick";
> +                               reg = <0xcc020000 0x1000>;
> +                               interrupts = <0 0 0
> +                                             0 1 0
> +                                             0 2 0
> +                                             0 49 0
> +                                             0 50 0
> +                                             0 51 0>;

Small nit: could we have these individually bracketed as below? We're doing
this fairly consistently across platforms now.

[...]

> +                       gpio: pinctrl@cc120000 {
> +                               #gpio-cells = <2>;
> +                               #interrupt-cells = <2>;
> +                               compatible = "sirf,marco-pinctrl";
> +                               reg = <0xcc120000 0x10000>;
> +                               interrupts = <0 43 0>,
> +                                          <0 44 0>,
> +                                          <0 45 0>,
> +                                          <0 46 0>,
> +                                          <0 47 0>;

From this point on you seem to bracket interrupts individually consistently.

Thanks,
Mark.
Barry Song Jan. 3, 2013, 10:28 a.m. UTC | #2 
Hi Mark,
Thanks very much for reviewing.

2013/1/2, Mark Rutland <mark.rutland@arm.com>:
> On Thu, Dec 20, 2012 at 12:13:51PM +0000, Barry Song wrote:
>> From: Barry Song <Baohua.Song@csr.com>
>>
>> SiRFmarco is a dual-core cortex-a9 SMP SoC from CSR. this patch
>> adds the .dtsi and a basic evb board .dts for it.
>>
>> Signed-off-by: Barry Song <Baohua.Song@csr.com>
>> ---
>>  arch/arm/boot/dts/marco-evb.dts |   51 +++
>>  arch/arm/boot/dts/marco.dtsi    |  749
>> +++++++++++++++++++++++++++++++++++++++
>>  2 files changed, 800 insertions(+), 0 deletions(-)
>>  create mode 100644 arch/arm/boot/dts/marco-evb.dts
>>  create mode 100644 arch/arm/boot/dts/marco.dtsi
>
> [...]
>
>> diff --git a/arch/arm/boot/dts/marco.dtsi b/arch/arm/boot/dts/marco.dtsi
>> new file mode 100644
>> index 0000000..00b5eb7
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/marco.dtsi
>> @@ -0,0 +1,749 @@
>> +/*
>> + * DTS file for CSR SiRFmarco SoC
>> + *
>> + * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group
>> company.
>> + *
>> + * Licensed under GPLv2 or later.
>> + */
>> +
>> +/include/ "skeleton.dtsi"
>> +/ {
>> +       compatible = "sirf,marco";
>> +       #address-cells = <1>;
>> +       #size-cells = <1>;
>> +       interrupt-parent = <&gic>;
>> +
>> +       cpus {
>> +               cpu@0 {
>> +                       compatible = "arm,cortex-a9";
>> +               };
>> +               cpu@1 {
>> +                       compatible = "arm,cortex-a9";
>> +               };
>> +       };
>
> It would be good if the cpu nodes had their reg property set, so the
> logical
> map can be populated. They should also have their device_type set to "cpu".
>
agree.

>> +
>> +       axi {
>> +               compatible = "simple-bus";
>> +               #address-cells = <1>;
>> +               #size-cells = <1>;
>> +               ranges = <0x40000000 0x40000000 0xa0000000>;
>> +
>> +               l2-cache-controller@c0030000 {
>> +                       compatible = "arm,pl310-cache",
>> "sirf,marco-pl310-cache";
>
> I believe the order of these should be swapped such that the most specific
> match comes first.

agree since that compatible is a list of strings. The first string in
the list specifies the exact device that the node represents in the
form "<manufacturer>,<model>". The following strings represent other
devices that the device is compatible with.

>
>> +                       reg = <0xc0030000 0x1000>;
>> +                       interrupts = <0 59 0>;
>> +                       arm,tag-latency = <1 1 1>;
>> +                       arm,data-latency = <1 1 1>;
>> +                       arm,filter-ranges = <0x40000000 0x80000000>;
>> +               };
>
> [...]
>
>> +               peri-iobg {
>> +                       compatible = "simple-bus";
>> +                       #address-cells = <1>;
>> +                       #size-cells = <1>;
>> +                       ranges = <0xcc000000 0xcc000000 0x2000000>;
>> +
>> +                       timer@cc020000 {
>> +                               compatible = "sirf,marco-tick";
>> +                               reg = <0xcc020000 0x1000>;
>> +                               interrupts = <0 0 0
>> +                                             0 1 0
>> +                                             0 2 0
>> +                                             0 49 0
>> +                                             0 50 0
>> +                                             0 51 0>;
>
> Small nit: could we have these individually bracketed as below? We're doing
> this fairly consistently across platforms now.

agree.

>
> [...]
>
>> +                       gpio: pinctrl@cc120000 {
>> +                               #gpio-cells = <2>;
>> +                               #interrupt-cells = <2>;
>> +                               compatible = "sirf,marco-pinctrl";
>> +                               reg = <0xcc120000 0x10000>;
>> +                               interrupts = <0 43 0>,
>> +                                          <0 44 0>,
>> +                                          <0 45 0>,
>> +                                          <0 46 0>,
>> +                                          <0 47 0>;
>
> From this point on you seem to bracket interrupts individually
> consistently.
>
> Thanks,
> Mark.

-barry
diff mbox

Patch

diff --git a/arch/arm/boot/dts/marco-evb.dts b/arch/arm/boot/dts/marco-evb.dts
new file mode 100644
index 0000000..4e68d3c
--- /dev/null
+++ b/arch/arm/boot/dts/marco-evb.dts
@@ -0,0 +1,51 @@ 
+/*
+ * DTS file for CSR SiRFmarco Evaluation Board
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/dts-v1/;
+
+/include/ "marco.dtsi"
+
+/ {
+	model = "CSR SiRFmarco Evaluation Board";
+	compatible = "sirf,marco", "sirf,marco-cb";
+
+	memory {
+		reg = <0x40000000 0x60000000>;
+	};
+
+	axi {
+		peri-iobg {
+			uart1: uart@cc060000 {
+				status = "okay";
+			};
+			i2c0: i2c@cc0e0000 {
+			      status = "okay";
+			      fpga-cpld@4d {
+				      compatible = "sirf,fpga-cpld";
+				      reg = <0x4d>;
+			      };
+			};
+			spi1: spi@cc170000 {
+				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&spi1_pins_a>;
+				spi@0 {
+					compatible = "spidev";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+			pci-iobg {
+				sd0: sdhci@cd000000 {
+					bus-width = <8>;
+					status = "okay";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/marco.dtsi b/arch/arm/boot/dts/marco.dtsi
new file mode 100644
index 0000000..00b5eb7
--- /dev/null
+++ b/arch/arm/boot/dts/marco.dtsi
@@ -0,0 +1,749 @@ 
+/*
+ * DTS file for CSR SiRFmarco SoC
+ *
+ * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+/ {
+	compatible = "sirf,marco";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+		};
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+		};
+	};
+
+	axi {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x40000000 0x40000000 0xa0000000>;
+
+		l2-cache-controller@c0030000 {
+			compatible = "arm,pl310-cache", "sirf,marco-pl310-cache";
+			reg = <0xc0030000 0x1000>;
+			interrupts = <0 59 0>;
+			arm,tag-latency = <1 1 1>;
+			arm,data-latency = <1 1 1>;
+			arm,filter-ranges = <0x40000000 0x80000000>;
+		};
+
+		gic: interrupt-controller@c0011000 {
+			compatible = "arm,cortex-a9-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0xc0011000 0x1000>,
+			      <0xc0010100 0x0100>;
+		};
+
+		rstc-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xc2000000 0xc2000000 0x1000000>;
+
+			reset-controller@c2000000 {
+				compatible = "sirf,marco-rstc";
+				reg = <0xc2000000 0x10000>;
+			};
+		};
+
+		sys-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xc3000000 0xc3000000 0x1000000>;
+
+			clock-controller@c3000000 {
+				compatible = "sirf,marco-clkc";
+				reg = <0xc3000000 0x1000>;
+				interrupts = <0 3 0>;
+			};
+
+			rsc-controller@c3010000 {
+				compatible = "sirf,marco-rsc";
+				reg = <0xc3010000 0x1000>;
+			};
+		};
+
+		mem-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xc4000000 0xc4000000 0x1000000>;
+
+			memory-controller@c4000000 {
+				compatible = "sirf,marco-memc";
+				reg = <0xc4000000 0x10000>;
+				interrupts = <0 27 0>;
+			};
+		};
+
+		disp-iobg0 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xc5000000 0xc5000000 0x1000000>;
+
+			display0@c5000000 {
+				compatible = "sirf,marco-lcd";
+				reg = <0xc5000000 0x10000>;
+				interrupts = <0 30 0>;
+			};
+
+			vpp0@c5010000 {
+				compatible = "sirf,marco-vpp";
+				reg = <0xc5010000 0x10000>;
+				interrupts = <0 31 0>;
+			};
+		};
+
+		disp-iobg1 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xc6000000 0xc6000000 0x1000000>;
+
+			display1@c6000000 {
+				compatible = "sirf,marco-lcd";
+				reg = <0xc6000000 0x10000>;
+				interrupts = <0 62 0>;
+			};
+
+			vpp1@c6010000 {
+				compatible = "sirf,marco-vpp";
+				reg = <0xc6010000 0x10000>;
+				interrupts = <0 63 0>;
+			};
+		};
+
+		graphics-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xc8000000 0xc8000000 0x1000000>;
+
+			graphics@c8000000 {
+				compatible = "powervr,sgx540";
+				reg = <0xc8000000 0x1000000>;
+				interrupts = <0 6 0>;
+			};
+		};
+
+		multimedia-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xc9000000 0xc9000000 0x1000000>;
+
+			multimedia@a0000000 {
+				compatible = "sirf,marco-video-codec";
+				reg = <0xc9000000 0x1000000>;
+				interrupts = <0 5 0>;
+			};
+		};
+
+		dsp-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xca000000 0xca000000 0x2000000>;
+
+			dspif@ca000000 {
+				compatible = "sirf,marco-dspif";
+				reg = <0xca000000 0x10000>;
+				interrupts = <0 9 0>;
+			};
+
+			gps@ca010000 {
+				compatible = "sirf,marco-gps";
+				reg = <0xca010000 0x10000>;
+				interrupts = <0 7 0>;
+			};
+
+			dsp@cb000000 {
+				compatible = "sirf,marco-dsp";
+				reg = <0xcb000000 0x1000000>;
+				interrupts = <0 8 0>;
+			};
+		};
+
+		peri-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xcc000000 0xcc000000 0x2000000>;
+
+			timer@cc020000 {
+				compatible = "sirf,marco-tick";
+				reg = <0xcc020000 0x1000>;
+				interrupts = <0 0 0
+					      0 1 0
+					      0 2 0
+					      0 49 0
+					      0 50 0
+					      0 51 0>;
+			};
+
+			nand@cc030000 {
+				compatible = "sirf,marco-nand";
+				reg = <0xcc030000 0x10000>;
+				interrupts = <0 41 0>;
+			};
+
+			audio@cc040000 {
+				compatible = "sirf,marco-audio";
+				reg = <0xcc040000 0x10000>;
+				interrupts = <0 35 0>;
+			};
+
+			uart0: uart@cc050000 {
+				cell-index = <0>;
+				compatible = "sirf,marco-uart";
+				reg = <0xcc050000 0x1000>;
+				interrupts = <0 17 0>;
+				fifosize = <128>;
+				status = "disabled";
+			};
+
+			uart1: uart@cc060000 {
+				cell-index = <1>;
+				compatible = "sirf,marco-uart";
+				reg = <0xcc060000 0x1000>;
+				interrupts = <0 18 0>;
+				fifosize = <32>;
+				status = "disabled";
+			};
+
+			uart2: uart@cc070000 {
+				cell-index = <2>;
+				compatible = "sirf,marco-uart";
+				reg = <0xcc070000 0x1000>;
+				interrupts = <0 19 0>;
+				fifosize = <128>;
+				status = "disabled";
+			};
+
+			uart3: uart@cc190000 {
+				cell-index = <3>;
+				compatible = "sirf,marco-uart";
+				reg = <0xcc190000 0x1000>;
+				interrupts = <0 66 0>;
+				fifosize = <128>;
+				status = "disabled";
+			};
+
+			uart4: uart@cc1a0000 {
+				cell-index = <4>;
+				compatible = "sirf,marco-uart";
+				reg = <0xcc1a0000 0x1000>;
+				interrupts = <0 69 0>;
+				fifosize = <128>;
+				status = "disabled";
+			};
+
+			usp0: usp@cc080000 {
+				cell-index = <0>;
+				compatible = "sirf,marco-usp";
+				reg = <0xcc080000 0x10000>;
+				interrupts = <0 20 0>;
+				status = "disabled";
+			};
+
+			usp1: usp@cc090000 {
+				cell-index = <1>;
+				compatible = "sirf,marco-usp";
+				reg = <0xcc090000 0x10000>;
+				interrupts = <0 21 0>;
+				status = "disabled";
+			};
+
+			usp2: usp@cc0a0000 {
+				cell-index = <2>;
+				compatible = "sirf,marco-usp";
+				reg = <0xcc0a0000 0x10000>;
+				interrupts = <0 22 0>;
+				status = "disabled";
+			};
+
+			dmac0: dma-controller@cc0b0000 {
+				cell-index = <0>;
+				compatible = "sirf,marco-dmac";
+				reg = <0xcc0b0000 0x10000>;
+				interrupts = <0 12 0>;
+			};
+
+			dmac1: dma-controller@cc160000 {
+				cell-index = <1>;
+				compatible = "sirf,marco-dmac";
+				reg = <0xcc160000 0x10000>;
+				interrupts = <0 13 0>;
+			};
+
+			vip@cc0c0000 {
+				compatible = "sirf,marco-vip";
+				reg = <0xcc0c0000 0x10000>;
+			};
+
+			spi0: spi@cc0d0000 {
+				cell-index = <0>;
+				compatible = "sirf,marco-spi";
+				reg = <0xcc0d0000 0x10000>;
+				interrupts = <0 15 0>;
+				sirf,spi-num-chipselects = <1>;
+				cs-gpios = <&gpio 0 0>;
+				sirf,spi-dma-rx-channel = <25>;
+				sirf,spi-dma-tx-channel = <20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@cc170000 {
+				cell-index = <1>;
+				compatible = "sirf,marco-spi";
+				reg = <0xcc170000 0x10000>;
+				interrupts = <0 16 0>;
+				sirf,spi-num-chipselects = <1>;
+				cs-gpios = <&gpio 0 0>;
+				sirf,spi-dma-rx-channel = <12>;
+				sirf,spi-dma-tx-channel = <13>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c0: i2c@cc0e0000 {
+				cell-index = <0>;
+				compatible = "sirf,marco-i2c";
+				reg = <0xcc0e0000 0x10000>;
+				interrupts = <0 24 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@cc0f0000 {
+				cell-index = <1>;
+				compatible = "sirf,marco-i2c";
+				reg = <0xcc0f0000 0x10000>;
+				interrupts = <0 25 0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			tsc@cc110000 {
+				compatible = "sirf,marco-tsc";
+				reg = <0xcc110000 0x10000>;
+				interrupts = <0 33 0>;
+			};
+
+			gpio: pinctrl@cc120000 {
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "sirf,marco-pinctrl";
+				reg = <0xcc120000 0x10000>;
+				interrupts = <0 43 0>,
+					   <0 44 0>,
+					   <0 45 0>,
+					   <0 46 0>,
+					   <0 47 0>;
+				gpio-controller;
+				interrupt-controller;
+
+				lcd_16pins_a: lcd0@0 {
+					lcd {
+						sirf,pins = "lcd_16bitsgrp";
+						sirf,function = "lcd_16bits";
+					};
+				};
+				lcd_18pins_a: lcd0@1 {
+					lcd {
+						sirf,pins = "lcd_18bitsgrp";
+						sirf,function = "lcd_18bits";
+					};
+				};
+				lcd_24pins_a: lcd0@2 {
+					lcd {
+						sirf,pins = "lcd_24bitsgrp";
+						sirf,function = "lcd_24bits";
+					};
+				};
+				lcdrom_pins_a: lcdrom0@0 {
+					lcd {
+						sirf,pins = "lcdromgrp";
+						sirf,function = "lcdrom";
+					};
+				};
+				uart0_pins_a: uart0@0 {
+					uart {
+						sirf,pins = "uart0grp";
+						sirf,function = "uart0";
+					};
+				};
+				uart1_pins_a: uart1@0 {
+					uart {
+						sirf,pins = "uart1grp";
+						sirf,function = "uart1";
+					};
+				};
+				uart2_pins_a: uart2@0 {
+					uart {
+						sirf,pins = "uart2grp";
+						sirf,function = "uart2";
+					};
+				};
+				uart2_noflow_pins_a: uart2@1 {
+					uart {
+						sirf,pins = "uart2_nostreamctrlgrp";
+						sirf,function = "uart2_nostreamctrl";
+					};
+				};
+				spi0_pins_a: spi0@0 {
+					spi {
+						sirf,pins = "spi0grp";
+						sirf,function = "spi0";
+					};
+				};
+				spi1_pins_a: spi1@0 {
+					spi {
+						sirf,pins = "spi1grp";
+						sirf,function = "spi1";
+					};
+				};
+				i2c0_pins_a: i2c0@0 {
+					i2c {
+						sirf,pins = "i2c0grp";
+						sirf,function = "i2c0";
+					};
+				};
+				i2c1_pins_a: i2c1@0 {
+					i2c {
+						sirf,pins = "i2c1grp";
+						sirf,function = "i2c1";
+					};
+				};
+				pwm0_pins_a: pwm0@0 {
+				        pwm {
+				                sirf,pins = "pwm0grp";
+				                sirf,function = "pwm0";
+				        };
+				};
+				pwm1_pins_a: pwm1@0 {
+				        pwm {
+				                sirf,pins = "pwm1grp";
+				                sirf,function = "pwm1";
+				        };
+				};
+				pwm2_pins_a: pwm2@0 {
+				        pwm {
+				                sirf,pins = "pwm2grp";
+				                sirf,function = "pwm2";
+				        };
+				};
+				pwm3_pins_a: pwm3@0 {
+				        pwm {
+				                sirf,pins = "pwm3grp";
+				                sirf,function = "pwm3";
+				        };
+				};
+				gps_pins_a: gps@0 {
+				        gps {
+				                sirf,pins = "gpsgrp";
+				                sirf,function = "gps";
+				        };
+				};
+				vip_pins_a: vip@0 {
+				        vip {
+				                sirf,pins = "vipgrp";
+				                sirf,function = "vip";
+				        };
+				};
+				sdmmc0_pins_a: sdmmc0@0 {
+				        sdmmc0 {
+				                sirf,pins = "sdmmc0grp";
+				                sirf,function = "sdmmc0";
+				        };
+				};
+				sdmmc1_pins_a: sdmmc1@0 {
+				        sdmmc1 {
+				                sirf,pins = "sdmmc1grp";
+				                sirf,function = "sdmmc1";
+				        };
+				};
+				sdmmc2_pins_a: sdmmc2@0 {
+				        sdmmc2 {
+				                sirf,pins = "sdmmc2grp";
+				                sirf,function = "sdmmc2";
+				        };
+				};
+				sdmmc3_pins_a: sdmmc3@0 {
+				        sdmmc3 {
+				                sirf,pins = "sdmmc3grp";
+				                sirf,function = "sdmmc3";
+				        };
+				};
+				sdmmc4_pins_a: sdmmc4@0 {
+				        sdmmc4 {
+				                sirf,pins = "sdmmc4grp";
+				                sirf,function = "sdmmc4";
+				        };
+				};
+				sdmmc5_pins_a: sdmmc5@0 {
+				        sdmmc5 {
+				                sirf,pins = "sdmmc5grp";
+				                sirf,function = "sdmmc5";
+				        };
+				};
+				i2s_pins_a: i2s@0 {
+				        i2s {
+				                sirf,pins = "i2sgrp";
+				                sirf,function = "i2s";
+				        };
+				};
+				ac97_pins_a: ac97@0 {
+				        ac97 {
+				                sirf,pins = "ac97grp";
+				                sirf,function = "ac97";
+				        };
+				};
+				nand_pins_a: nand@0 {
+				        nand {
+				                sirf,pins = "nandgrp";
+				                sirf,function = "nand";
+				        };
+				};
+				usp0_pins_a: usp0@0 {
+				        usp0 {
+				                sirf,pins = "usp0grp";
+				                sirf,function = "usp0";
+				        };
+				};
+				usp1_pins_a: usp1@0 {
+				        usp1 {
+				                sirf,pins = "usp1grp";
+				                sirf,function = "usp1";
+				        };
+				};
+				usp2_pins_a: usp2@0 {
+				        usp2 {
+				                sirf,pins = "usp2grp";
+				                sirf,function = "usp2";
+				        };
+				};
+				usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus@0 {
+				        usb0_utmi_drvbus {
+				                sirf,pins = "usb0_utmi_drvbusgrp";
+				                sirf,function = "usb0_utmi_drvbus";
+				        };
+				};
+				usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus@0 {
+				        usb1_utmi_drvbus {
+				                sirf,pins = "usb1_utmi_drvbusgrp";
+				                sirf,function = "usb1_utmi_drvbus";
+				        };
+				};
+				warm_rst_pins_a: warm_rst@0 {
+				        warm_rst {
+				                sirf,pins = "warm_rstgrp";
+				                sirf,function = "warm_rst";
+				        };
+				};
+				pulse_count_pins_a: pulse_count@0 {
+				        pulse_count {
+				                sirf,pins = "pulse_countgrp";
+				                sirf,function = "pulse_count";
+				        };
+				};
+				cko0_rst_pins_a: cko0_rst@0 {
+				        cko0_rst {
+				                sirf,pins = "cko0_rstgrp";
+				                sirf,function = "cko0_rst";
+				        };
+				};
+				cko1_rst_pins_a: cko1_rst@0 {
+				        cko1_rst {
+				                sirf,pins = "cko1_rstgrp";
+				                sirf,function = "cko1_rst";
+				        };
+				};
+			};
+
+			pwm@cc130000 {
+				compatible = "sirf,marco-pwm";
+				reg = <0xcc130000 0x10000>;
+			};
+
+			efusesys@cc140000 {
+				compatible = "sirf,marco-efuse";
+				reg = <0xcc140000 0x10000>;
+			};
+
+			pulsec@cc150000 {
+				compatible = "sirf,marco-pulsec";
+				reg = <0xcc150000 0x10000>;
+				interrupts = <0 48 0>;
+			};
+
+			pci-iobg {
+				compatible = "sirf,marco-pciiobg", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0xcd000000 0xcd000000 0x1000000>;
+
+				sd0: sdhci@cd000000 {
+					cell-index = <0>;
+					compatible = "sirf,marco-sdhc";
+					reg = <0xcd000000 0x100000>;
+					interrupts = <0 38 0>;
+					status = "disabled";
+				};
+
+				sd1: sdhci@cd100000 {
+					cell-index = <1>;
+					compatible = "sirf,marco-sdhc";
+					reg = <0xcd100000 0x100000>;
+					interrupts = <0 38 0>;
+					status = "disabled";
+				};
+
+				sd2: sdhci@cd200000 {
+					cell-index = <2>;
+					compatible = "sirf,marco-sdhc";
+					reg = <0xcd200000 0x100000>;
+					interrupts = <0 23 0>;
+					status = "disabled";
+				};
+
+				sd3: sdhci@cd300000 {
+					cell-index = <3>;
+					compatible = "sirf,marco-sdhc";
+					reg = <0xcd300000 0x100000>;
+					interrupts = <0 23 0>;
+					status = "disabled";
+				};
+
+				sd4: sdhci@cd400000 {
+					cell-index = <4>;
+					compatible = "sirf,marco-sdhc";
+					reg = <0xcd400000 0x100000>;
+					interrupts = <0 39 0>;
+					status = "disabled";
+				};
+
+				sd5: sdhci@cd500000 {
+					cell-index = <5>;
+					compatible = "sirf,marco-sdhc";
+					reg = <0xcd500000 0x100000>;
+					interrupts = <0 39 0>;
+					status = "disabled";
+				};
+
+				pci-copy@cd900000 {
+					compatible = "sirf,marco-pcicp";
+					reg = <0xcd900000 0x100000>;
+					interrupts = <0 40 0>;
+				};
+
+				rom-interface@cda00000 {
+					compatible = "sirf,marco-romif";
+					reg = <0xcda00000 0x100000>;
+				};
+			};
+		};
+
+		rtc-iobg {
+			compatible = "sirf,marco-rtciobg", "sirf-marco-rtciobg-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0xc1000000 0x10000>;
+
+			gpsrtc@1000 {
+				compatible = "sirf,marco-gpsrtc";
+				reg = <0x1000 0x1000>;
+				interrupts = <0 55 0>,
+					   <0 56 0>,
+					   <0 57 0>;
+			};
+
+			sysrtc@2000 {
+				compatible = "sirf,marco-sysrtc";
+				reg = <0x2000 0x1000>;
+				interrupts = <0 52 0>,
+					   <0 53 0>,
+					   <0 54 0>;
+			};
+
+			pwrc@3000 {
+				compatible = "sirf,marco-pwrc";
+				reg = <0x3000 0x1000>;
+				interrupts = <0 32 0>;
+			};
+		};
+
+		uus-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xce000000 0xce000000 0x1000000>;
+
+			usb0: usb@ce000000 {
+				compatible = "chipidea,ci13611a-marco";
+				reg = <0xce000000 0x10000>;
+				interrupts = <0 10 0>;
+			};
+
+			usb1: usb@ce010000 {
+				compatible = "chipidea,ci13611a-marco";
+				reg = <0xce010000 0x10000>;
+				interrupts = <0 11 0>;
+			};
+
+			security@ce020000 {
+				compatible = "sirf,marco-security";
+				reg = <0xce020000 0x10000>;
+				interrupts = <0 42 0>;
+			};
+		};
+
+		can-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xd0000000 0xd0000000 0x1000000>;
+
+			can0: can@d0000000 {
+				compatible = "sirf,marco-can";
+				reg = <0xd0000000 0x10000>;
+			};
+
+			can1: can@d0010000 {
+				compatible = "sirf,marco-can";
+				reg = <0xd0010000 0x10000>;
+			};
+		};
+
+		lvds-iobg {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0xd1000000 0xd1000000 0x1000000>;
+
+			lvds@d1000000 {
+				compatible = "sirf,marco-lvds";
+				reg = <0xd1000000 0x10000>;
+				interrupts = <0 64 0>;
+			};
+		};
+	};
+};