[9/9] ARM: PRIMA2: provide two DEBUG_LL ports for prima2 and marco

Commit Message

Barry Song Dec. 20, 2012, 12:20 p.m. UTC

From: Barry Song <[e-mail]>

prima2 and marco has different memory base, the old code will
fail if we enable DEBUG_LL in marco.
this patch adds two debuf port, while debugging, we select one
of PRIMA2 and MARCO debug ports, in the products, we disable
DEBUG_LL.

Signed-off-by: Barry Song <[e-mail]>
---
 arch/arm/Kconfig.debug                         |   14 ++++++++++++++
 arch/arm/mach-prima2/include/mach/uart.h       |    6 ++++++
 arch/arm/mach-prima2/include/mach/uncompress.h |    3 +++
 3 files changed, 23 insertions(+), 0 deletions(-)

Patch

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 661030d..00ad1f8 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -386,6 +386,20 @@  choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Tegra based platforms.
 
+	config DEBUG_SIRFPRIMA2_UART1
+		bool "Kernel low-level debugging messages via SiRFprimaII UART1"
+		depends on ARCH_PRIMA2
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the uart1 port on SiRFprimaII devices.
+
+	config DEBUG_SIRFMARCO_UART1
+		bool "Kernel low-level debugging messages via SiRFmarco UART1"
+		depends on ARCH_MARCO
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the uart1 port on SiRFmarco devices.
+
 	config DEBUG_VEXPRESS_UART0_DETECT
 		bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
 		depends on ARCH_VEXPRESS && CPU_CP15_MMU
diff --git a/arch/arm/mach-prima2/include/mach/uart.h b/arch/arm/mach-prima2/include/mach/uart.h
index c98b4d5..c10510d 100644
--- a/arch/arm/mach-prima2/include/mach/uart.h
+++ b/arch/arm/mach-prima2/include/mach/uart.h
@@ -10,7 +10,13 @@ 
 #define __MACH_PRIMA2_SIRFSOC_UART_H
 
 /* UART-1: used as serial debug port */
+#if defined(CONFIG_DEBUG_SIRFPRIMA2_UART1)
 #define SIRFSOC_UART1_PA_BASE          0xb0060000
+#elif defined(CONFIG_DEBUG_SIRFMARCO_UART1)
+#define SIRFSOC_UART1_PA_BASE          0xcc060000
+#else
+#define SIRFSOC_UART1_PA_BASE          0
+#endif
 #define SIRFSOC_UART1_VA_BASE          SIRFSOC_VA(0x060000)
 #define SIRFSOC_UART1_SIZE		SZ_4K
 
diff --git a/arch/arm/mach-prima2/include/mach/uncompress.h b/arch/arm/mach-prima2/include/mach/uncompress.h
index 0c898fc..15f3edc 100644
--- a/arch/arm/mach-prima2/include/mach/uncompress.h
+++ b/arch/arm/mach-prima2/include/mach/uncompress.h
@@ -25,6 +25,9 @@  static __inline__ void putc(char c)
 	 * during kernel decompression, all mappings are flat:
 	 *  virt_addr == phys_addr
 	 */
+	if (!SIRFSOC_UART1_PA_BASE)
+		return;
+
 	while (__raw_readl((void __iomem *)SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_STATUS)
 		& SIRFSOC_UART1_TXFIFO_FULL)
 		barrier();