[V2,3/3] ARM: tegra: paz00: enable HDMI port

Commit Message

Stephen Warren Jan. 2, 2013, 9:53 p.m. UTC

From: Stephen Warren <[e-mail]>

Signed-off-by: Stephen Warren <[e-mail]>
---
v2: Limit DDC I2C speed to 100KHz.
---
 arch/arm/boot/dts/tegra20-paz00.dts |   20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

Patch

diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index 6a93d14..80d9635 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -10,6 +10,18 @@ 
 		reg = <0x00000000 0x20000000>;
 	};
 
+	host1x {
+		hdmi {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */
+		};
+	};
+
 	pinmux {
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
@@ -252,9 +264,9 @@ 
 		};
 	};
 
-	i2c@7000c400 {
+	hdmi_ddc: i2c@7000c400 {
 		status = "okay";
-		clock-frequency = <400000>;
+		clock-frequency = <100000>;
 	};
 
 	nvec {
@@ -367,13 +379,13 @@ 
 					regulator-max-microvolt = <1800000>;
 				};
 
-				ldo7 {
+				hdmi_vdd_reg: ldo7 {
 					regulator-name = "+3.3vs_ldo7,avdd_hdmi";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 				};
 
-				ldo8 {
+				hdmi_pll_reg: ldo8 {
 					regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;