diff mbox

pinctrl: mvebu: fix MPP6 value for kirkwood driver

Message ID 1357681024-4686-1-git-send-email-simon.guinot@sequanux.org (mailing list archive)
State New, archived
Headers show

Commit Message

Simon Guinot Jan. 8, 2013, 9:37 p.m. UTC
Note that I am not sure about the MPP value for the PTP functionality.
It seems that the PTP references have been removed from the Marvell
hardware specifications available to me.

Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
---
 drivers/pinctrl/mvebu/pinctrl-kirkwood.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Comments

Jason Cooper Jan. 9, 2013, 12:26 a.m. UTC | #1
On Tue, Jan 08, 2013 at 10:37:04PM +0100, Simon Guinot wrote:
> Note that I am not sure about the MPP value for the PTP functionality.
> It seems that the PTP references have been removed from the Marvell
> hardware specifications available to me.
> 
> Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>

Acked-by: Jason Cooper <jason@lakedaemon.net>

Linus, would you prefer to take this through your tree?  I'm fine either
way.

thx,

Jason.

> ---
>  drivers/pinctrl/mvebu/pinctrl-kirkwood.c |    6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pinctrl/mvebu/pinctrl-kirkwood.c b/drivers/pinctrl/mvebu/pinctrl-kirkwood.c
> index fa6ce31..02d5b89 100644
> --- a/drivers/pinctrl/mvebu/pinctrl-kirkwood.c
> +++ b/drivers/pinctrl/mvebu/pinctrl-kirkwood.c
> @@ -66,9 +66,9 @@ static struct mvebu_mpp_mode mv88f6xxx_mpp_modes[] = {
>  		MPP_VAR_FUNCTION(0x5, "sata0", "act",    V(0, 1, 1, 1, 1, 0)),
>  		MPP_VAR_FUNCTION(0xb, "lcd", "vsync",    V(0, 0, 0, 0, 1, 0))),
>  	MPP_MODE(6,
> -		MPP_VAR_FUNCTION(0x0, "sysrst", "out",   V(1, 1, 1, 1, 1, 1)),
> -		MPP_VAR_FUNCTION(0x1, "spi", "mosi",     V(1, 1, 1, 1, 1, 1)),
> -		MPP_VAR_FUNCTION(0x2, "ptp", "trig",     V(1, 1, 1, 1, 0, 0))),
> +		MPP_VAR_FUNCTION(0x1, "sysrst", "out",   V(1, 1, 1, 1, 1, 1)),
> +		MPP_VAR_FUNCTION(0x2, "spi", "mosi",     V(1, 1, 1, 1, 1, 1)),
> +		MPP_VAR_FUNCTION(0x3, "ptp", "trig",     V(1, 1, 1, 1, 0, 0))),
>  	MPP_MODE(7,
>  		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 1, 1, 1)),
>  		MPP_VAR_FUNCTION(0x1, "pex", "rsto",     V(1, 1, 1, 1, 0, 1)),
> -- 
> 1.7.10
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Andrew Lunn Jan. 9, 2013, 6:15 a.m. UTC | #2
On Tue, Jan 08, 2013 at 10:37:04PM +0100, Simon Guinot wrote:
> Note that I am not sure about the MPP value for the PTP functionality.
> It seems that the PTP references have been removed from the Marvell
> hardware specifications available to me.
> 
> Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
> ---
>  drivers/pinctrl/mvebu/pinctrl-kirkwood.c |    6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pinctrl/mvebu/pinctrl-kirkwood.c b/drivers/pinctrl/mvebu/pinctrl-kirkwood.c
> index fa6ce31..02d5b89 100644
> --- a/drivers/pinctrl/mvebu/pinctrl-kirkwood.c
> +++ b/drivers/pinctrl/mvebu/pinctrl-kirkwood.c
> @@ -66,9 +66,9 @@ static struct mvebu_mpp_mode mv88f6xxx_mpp_modes[] = {
>  		MPP_VAR_FUNCTION(0x5, "sata0", "act",    V(0, 1, 1, 1, 1, 0)),
>  		MPP_VAR_FUNCTION(0xb, "lcd", "vsync",    V(0, 0, 0, 0, 1, 0))),
>  	MPP_MODE(6,
> -		MPP_VAR_FUNCTION(0x0, "sysrst", "out",   V(1, 1, 1, 1, 1, 1)),
> -		MPP_VAR_FUNCTION(0x1, "spi", "mosi",     V(1, 1, 1, 1, 1, 1)),
> -		MPP_VAR_FUNCTION(0x2, "ptp", "trig",     V(1, 1, 1, 1, 0, 0))),
> +		MPP_VAR_FUNCTION(0x1, "sysrst", "out",   V(1, 1, 1, 1, 1, 1)),
> +		MPP_VAR_FUNCTION(0x2, "spi", "mosi",     V(1, 1, 1, 1, 1, 1)),
> +		MPP_VAR_FUNCTION(0x3, "ptp", "trig",     V(1, 1, 1, 1, 0, 0))),
>  	MPP_MODE(7,
>  		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 1, 1, 1)),
>  		MPP_VAR_FUNCTION(0x1, "pex", "rsto",     V(1, 1, 1, 1, 0, 1)),
> -- 
> 1.7.10

Acked-by: Andrew Lunn <andrew@lunn.ch>

I checked against the old MPP.H and the "88F6281 Integrated Controller
Hardware Specifications".

It is interesting that pin 6 cannot be used as a GP[IO] at all. Some
of the other pins are limited to GPO, but this appears to be the only
one which cannot be used at all.

    Andrew
Linus Walleij Jan. 18, 2013, 7:30 p.m. UTC | #3
On Tue, Jan 8, 2013 at 10:37 PM, Simon Guinot <simon.guinot@sequanux.org> wrote:

> Note that I am not sure about the MPP value for the PTP functionality.
> It seems that the PTP references have been removed from the Marvell
> hardware specifications available to me.
>
> Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>

Applied with Jason's and Andrew's ACKs!

Thanks!
Linus Walleij
diff mbox

Patch

diff --git a/drivers/pinctrl/mvebu/pinctrl-kirkwood.c b/drivers/pinctrl/mvebu/pinctrl-kirkwood.c
index fa6ce31..02d5b89 100644
--- a/drivers/pinctrl/mvebu/pinctrl-kirkwood.c
+++ b/drivers/pinctrl/mvebu/pinctrl-kirkwood.c
@@ -66,9 +66,9 @@  static struct mvebu_mpp_mode mv88f6xxx_mpp_modes[] = {
 		MPP_VAR_FUNCTION(0x5, "sata0", "act",    V(0, 1, 1, 1, 1, 0)),
 		MPP_VAR_FUNCTION(0xb, "lcd", "vsync",    V(0, 0, 0, 0, 1, 0))),
 	MPP_MODE(6,
-		MPP_VAR_FUNCTION(0x0, "sysrst", "out",   V(1, 1, 1, 1, 1, 1)),
-		MPP_VAR_FUNCTION(0x1, "spi", "mosi",     V(1, 1, 1, 1, 1, 1)),
-		MPP_VAR_FUNCTION(0x2, "ptp", "trig",     V(1, 1, 1, 1, 0, 0))),
+		MPP_VAR_FUNCTION(0x1, "sysrst", "out",   V(1, 1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x2, "spi", "mosi",     V(1, 1, 1, 1, 1, 1)),
+		MPP_VAR_FUNCTION(0x3, "ptp", "trig",     V(1, 1, 1, 1, 0, 0))),
 	MPP_MODE(7,
 		MPP_VAR_FUNCTION(0x0, "gpo", NULL,       V(1, 1, 1, 1, 1, 1)),
 		MPP_VAR_FUNCTION(0x1, "pex", "rsto",     V(1, 1, 1, 1, 0, 1)),