diff mbox

[1/1] usb: fsl-mxc-udc: fix build error due to mach/hardware.h

Message ID 1357898188-10540-1-git-send-email-peter.chen@freescale.com (mailing list archive)
State New, archived
Headers show

Commit Message

Peter Chen Jan. 11, 2013, 9:56 a.m. UTC
It changes the driver to use platform_device_id rather than cpu_is_xxx
to determine the SoC type, and updates the platform code accordingly.

Compile ok at imx_v6_v7_defconfig with CONFIG_USB_FSL_USB2 enable.
Tested at mx51 bbg board, it works ok after enable phy clock
(Need another patch to fix this problem)

Signed-off-by: Peter Chen <peter.chen@freescale.com>
---
 arch/arm/mach-imx/clk-imx25.c                     |    6 +-
 arch/arm/mach-imx/clk-imx27.c                     |    6 +-
 arch/arm/mach-imx/clk-imx31.c                     |    6 +-
 arch/arm/mach-imx/clk-imx35.c                     |    6 +-
 arch/arm/mach-imx/clk-imx51-imx53.c               |    6 +-
 arch/arm/mach-imx/devices/devices-common.h        |    1 +
 arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c |   15 +++---
 drivers/usb/gadget/fsl_mxc_udc.c                  |   17 +++----
 drivers/usb/gadget/fsl_udc_core.c                 |   52 +++++++++++++-------
 drivers/usb/gadget/fsl_usb2_udc.h                 |   13 ++++--
 include/linux/fsl_devices.h                       |    8 +++
 11 files changed, 82 insertions(+), 54 deletions(-)

Comments

Felipe Balbi Jan. 11, 2013, 10:56 a.m. UTC | #1
Hi,

On Fri, Jan 11, 2013 at 05:56:28PM +0800, Peter Chen wrote:
> It changes the driver to use platform_device_id rather than cpu_is_xxx
> to determine the SoC type, and updates the platform code accordingly.
> 
> Compile ok at imx_v6_v7_defconfig with CONFIG_USB_FSL_USB2 enable.
> Tested at mx51 bbg board, it works ok after enable phy clock
> (Need another patch to fix this problem)
> 
> Signed-off-by: Peter Chen <peter.chen@freescale.com>

this is too big for -rc, can you break it down into smaller pieces ?
Shawn Guo Jan. 11, 2013, 11:35 a.m. UTC | #2
On Fri, Jan 11, 2013 at 12:56:51PM +0200, Felipe Balbi wrote:
> Hi,
> 
> On Fri, Jan 11, 2013 at 05:56:28PM +0800, Peter Chen wrote:
> > It changes the driver to use platform_device_id rather than cpu_is_xxx
> > to determine the SoC type, and updates the platform code accordingly.
> > 
> > Compile ok at imx_v6_v7_defconfig with CONFIG_USB_FSL_USB2 enable.
> > Tested at mx51 bbg board, it works ok after enable phy clock
> > (Need another patch to fix this problem)
> > 
> > Signed-off-by: Peter Chen <peter.chen@freescale.com>
> 
> this is too big for -rc, can you break it down into smaller pieces ?
> 
This is a patch missed from my series that enables multiplatform
support for IMX (because the driver is not enabled in defconfig,
sorry).  To me, it's logically one patch to convert the driver over
to use platform_device_id.  It does not make much sense to split it.

Shawn
diff mbox

Patch

diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index b197aa7..67e353d 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -254,9 +254,9 @@  int __init mx25_clocks_init(void)
 	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
 	clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2");
 	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
-	clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usbotg_ahb], "ahb", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
+	clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx25");
+	clk_register_clkdev(clk[usbotg_ahb], "ahb", "imx-udc-mx25");
+	clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx25");
 	clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0");
 	/* i.mx25 has the i.mx35 type cspi */
 	clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 4c1d1e4..1ffe3b5 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -236,9 +236,9 @@  int __init mx27_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0");
 	clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0");
 	clk_register_clkdev(clk[per4_gate], "per", "imx27-camera.0");
-	clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
+	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "imx-udc-mx27");
+	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "imx-udc-mx27");
 	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
 	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.0");
 	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.0");
diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
index 8be64e0..ef66eaf 100644
--- a/arch/arm/mach-imx/clk-imx31.c
+++ b/arch/arm/mach-imx/clk-imx31.c
@@ -139,9 +139,9 @@  int __init mx31_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2");
 	clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2");
 	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
-	clk_register_clkdev(clk[usb_div_post], "per", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usb_gate], "ahb", "fsl-usb2-udc");
-	clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usb_div_post], "per", "imx-udc-mx31");
+	clk_register_clkdev(clk[usb_gate], "ahb", "imx-udc-mx31");
+	clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx31");
 	clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
 	/* i.mx31 has the i.mx21 type uart */
 	clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index 66f3d65..69fe9c8 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -251,9 +251,9 @@  int __init mx35_clocks_init()
 	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
 	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
 	clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2");
-	clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
-	clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx35");
+	clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx35");
+	clk_register_clkdev(clk[usbotg_gate], "ahb", "imx-udc-mx35");
 	clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
 	clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0");
 	clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index 579023f..fb7cb84 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -269,9 +269,9 @@  static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.2");
 	clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.2");
 	clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.2");
-	clk_register_clkdev(clk[usboh3_per_gate], "per", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usboh3_gate], "ipg", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usboh3_gate], "ahb", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usboh3_per_gate], "per", "imx-udc-mx51");
+	clk_register_clkdev(clk[usboh3_gate], "ipg", "imx-udc-mx51");
+	clk_register_clkdev(clk[usboh3_gate], "ahb", "imx-udc-mx51");
 	clk_register_clkdev(clk[nfc_gate], NULL, "imx51-nand");
 	clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
 	clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
diff --git a/arch/arm/mach-imx/devices/devices-common.h b/arch/arm/mach-imx/devices/devices-common.h
index 6277baf..9bd5777 100644
--- a/arch/arm/mach-imx/devices/devices-common.h
+++ b/arch/arm/mach-imx/devices/devices-common.h
@@ -63,6 +63,7 @@  struct platform_device *__init imx_add_flexcan(
 
 #include <linux/fsl_devices.h>
 struct imx_fsl_usb2_udc_data {
+	const char *devid;
 	resource_size_t iobase;
 	resource_size_t irq;
 };
diff --git a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
index 37e4439..fb527c7 100644
--- a/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
+++ b/arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
@@ -11,35 +11,36 @@ 
 #include "../hardware.h"
 #include "devices-common.h"
 
-#define imx_fsl_usb2_udc_data_entry_single(soc)				\
+#define imx_fsl_usb2_udc_data_entry_single(soc, _devid)			\
 	{								\
+		.devid = _devid,					\
 		.iobase = soc ## _USB_OTG_BASE_ADDR,			\
 		.irq = soc ## _INT_USB_OTG,				\
 	}
 
 #ifdef CONFIG_SOC_IMX25
 const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX25);
+	imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx25");
 #endif /* ifdef CONFIG_SOC_IMX25 */
 
 #ifdef CONFIG_SOC_IMX27
 const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX27);
+	imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX27 */
 
 #ifdef CONFIG_SOC_IMX31
 const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX31);
+	imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx31");
 #endif /* ifdef CONFIG_SOC_IMX31 */
 
 #ifdef CONFIG_SOC_IMX35
 const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX35);
+	imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx35");
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
 #ifdef CONFIG_SOC_IMX51
 const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX51);
+	imx_fsl_usb2_udc_data_entry_single(MX51, "imx-udc-mx51");
 #endif
 
 struct platform_device *__init imx_add_fsl_usb2_udc(
@@ -57,7 +58,7 @@  struct platform_device *__init imx_add_fsl_usb2_udc(
 			.flags = IORESOURCE_IRQ,
 		},
 	};
-	return imx_add_platform_device_dmamask("fsl-usb2-udc", -1,
+	return imx_add_platform_device_dmamask(data->devid, -1,
 			res, ARRAY_SIZE(res),
 			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
 }
diff --git a/drivers/usb/gadget/fsl_mxc_udc.c b/drivers/usb/gadget/fsl_mxc_udc.c
index 1b0f086..f313085 100644
--- a/drivers/usb/gadget/fsl_mxc_udc.c
+++ b/drivers/usb/gadget/fsl_mxc_udc.c
@@ -18,8 +18,6 @@ 
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
-
 static struct clk *mxc_ahb_clk;
 static struct clk *mxc_per_clk;
 static struct clk *mxc_ipg_clk;
@@ -28,7 +26,7 @@  static struct clk *mxc_ipg_clk;
 #define USBPHYCTRL_OTGBASE_OFFSET	0x608
 #define USBPHYCTRL_EVDO			(1 << 23)
 
-int fsl_udc_clk_init(struct platform_device *pdev)
+int fsl_udc_clk_init(enum fsl_udc_type devtype, struct platform_device *pdev)
 {
 	struct fsl_usb2_platform_data *pdata;
 	unsigned long freq;
@@ -59,7 +57,7 @@  int fsl_udc_clk_init(struct platform_device *pdev)
 	clk_prepare_enable(mxc_per_clk);
 
 	/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
-	if (!cpu_is_mx51()) {
+	if (!(devtype == IMX51_UDC)) {
 		freq = clk_get_rate(mxc_per_clk);
 		if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
 		    (freq < 59999000 || freq > 60001000)) {
@@ -79,19 +77,18 @@  eclkrate:
 	return ret;
 }
 
-void fsl_udc_clk_finalize(struct platform_device *pdev)
+void fsl_udc_clk_finalize(enum fsl_udc_type devtype,
+	struct platform_device *pdev)
 {
 	struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data;
-	if (cpu_is_mx35()) {
+	if (devtype == IMX35_UDC) {
 		unsigned int v;
 
 		/* workaround ENGcm09152 for i.MX35 */
 		if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
-			v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
-					USBPHYCTRL_OTGBASE_OFFSET));
+			v = readl(pdata->regs + USBPHYCTRL_OTGBASE_OFFSET);
 			writel(v | USBPHYCTRL_EVDO,
-				MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
-					USBPHYCTRL_OTGBASE_OFFSET));
+				pdata->regs + USBPHYCTRL_OTGBASE_OFFSET);
 		}
 	}
 
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index c19f7f1..9f9005b 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -41,6 +41,7 @@ 
 #include <linux/fsl_devices.h>
 #include <linux/dmapool.h>
 #include <linux/delay.h>
+#include <linux/of_device.h>
 
 #include <asm/byteorder.h>
 #include <asm/io.h>
@@ -2438,17 +2439,13 @@  static int __init fsl_udc_probe(struct platform_device *pdev)
 	unsigned int i;
 	u32 dccparams;
 
-	if (strcmp(pdev->name, driver_name)) {
-		VDBG("Wrong device");
-		return -ENODEV;
-	}
-
 	udc_controller = kzalloc(sizeof(struct fsl_udc), GFP_KERNEL);
 	if (udc_controller == NULL) {
 		ERR("malloc udc failed\n");
 		return -ENOMEM;
 	}
 
+	udc_controller->devtype = pdev->id_entry->driver_data;
 	pdata = pdev->dev.platform_data;
 	udc_controller->pdata = pdata;
 	spin_lock_init(&udc_controller->lock);
@@ -2505,7 +2502,7 @@  static int __init fsl_udc_probe(struct platform_device *pdev)
 #endif
 
 	/* Initialize USB clocks */
-	ret = fsl_udc_clk_init(pdev);
+	ret = fsl_udc_clk_init(udc_controller->devtype, pdev);
 	if (ret < 0)
 		goto err_iounmap_noclk;
 
@@ -2547,7 +2544,7 @@  static int __init fsl_udc_probe(struct platform_device *pdev)
 		dr_controller_setup(udc_controller);
 	}
 
-	fsl_udc_clk_finalize(pdev);
+	fsl_udc_clk_finalize(udc_controller->devtype, pdev);
 
 	/* Setup gadget structure */
 	udc_controller->gadget.ops = &fsl_gadget_ops;
@@ -2756,22 +2753,41 @@  static int fsl_udc_otg_resume(struct device *dev)
 
 	return fsl_udc_resume(NULL);
 }
-
 /*-------------------------------------------------------------------------
 	Register entry point for the peripheral controller driver
 --------------------------------------------------------------------------*/
-
+static struct platform_device_id fsl_udc_devtype[] = {
+	{
+		.name = "imx-udc-mx25",
+		.driver_data = IMX25_UDC,
+	}, {
+		.name = "imx-udc-mx27",
+		.driver_data = IMX27_UDC,
+	}, {
+		.name = "imx-udc-mx31",
+		.driver_data = IMX31_UDC,
+	}, {
+		.name = "imx-udc-mx35",
+		.driver_data = IMX35_UDC,
+	}, {
+		.name = "imx-udc-mx51",
+		.driver_data = IMX51_UDC,
+	}
+};
+MODULE_DEVICE_TABLE(platform, fsl_udc_devtype);
 static struct platform_driver udc_driver = {
-	.remove  = __exit_p(fsl_udc_remove),
+	.remove		= __exit_p(fsl_udc_remove),
+	/* Just for FSL i.mx SoC currently */
+	.id_table	= fsl_udc_devtype,
 	/* these suspend and resume are not usb suspend and resume */
-	.suspend = fsl_udc_suspend,
-	.resume  = fsl_udc_resume,
-	.driver  = {
-		.name = (char *)driver_name,
-		.owner = THIS_MODULE,
-		/* udc suspend/resume called from OTG driver */
-		.suspend = fsl_udc_otg_suspend,
-		.resume  = fsl_udc_otg_resume,
+	.suspend	= fsl_udc_suspend,
+	.resume		= fsl_udc_resume,
+	.driver		= {
+			.name = (char *)driver_name,
+			.owner = THIS_MODULE,
+			/* udc suspend/resume called from OTG driver */
+			.suspend = fsl_udc_otg_suspend,
+			.resume  = fsl_udc_otg_resume,
 	},
 };
 
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
index f61a967..bc1f6d0 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -505,6 +505,8 @@  struct fsl_udc {
 	u32 ep0_dir;		/* Endpoint zero direction: can be
 				   USB_DIR_IN or USB_DIR_OUT */
 	u8 device_address;	/* Device USB address */
+	/* devtype for kinds of SoC, only i.mx uses it now */
+	enum fsl_udc_type devtype;
 };
 
 /*-------------------------------------------------------------------------*/
@@ -591,15 +593,18 @@  static inline struct ep_queue_head *get_qh_by_ep(struct fsl_ep *ep)
 
 struct platform_device;
 #ifdef CONFIG_ARCH_MXC
-int fsl_udc_clk_init(struct platform_device *pdev);
-void fsl_udc_clk_finalize(struct platform_device *pdev);
+int fsl_udc_clk_init(enum fsl_udc_type devtype, struct platform_device *pdev);
+void fsl_udc_clk_finalize(enum fsl_udc_type devtype,
+		struct platform_device *pdev);
 void fsl_udc_clk_release(void);
 #else
-static inline int fsl_udc_clk_init(struct platform_device *pdev)
+static inline int fsl_udc_clk_init(enum fsl_udc_type devtype,
+		struct platform_device *pdev)
 {
 	return 0;
 }
-static inline void fsl_udc_clk_finalize(struct platform_device *pdev)
+static inline void fsl_udc_clk_finalize(enum fsl_udc_type devtype,
+		struct platform_device *pdev)
 {
 }
 static inline void fsl_udc_clk_release(void)
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index a82296a..7cb3fe0 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -66,6 +66,14 @@  enum fsl_usb2_phy_modes {
 	FSL_USB2_PHY_SERIAL,
 };
 
+enum fsl_udc_type {
+	IMX25_UDC,
+	IMX27_UDC,
+	IMX31_UDC,
+	IMX35_UDC,
+	IMX51_UDC,
+};
+
 struct clk;
 struct platform_device;