diff mbox

[v4,1/1] ARM i.MX6: change mxs usbphy clock usage

Message ID 1358476685-28572-1-git-send-email-peter.chen@freescale.com (mailing list archive)
State New, archived
Headers show

Commit Message

Peter Chen Jan. 18, 2013, 2:38 a.m. UTC
This mxs usbphy is only needs to be on after system boots
up, and software never needs to control it anymore.
Meanwhile, usbphy's parent needs to be notified if usb
is suspend or not. So we design below mxs usbphy usage:

- usbphy1_gate and usbphy2_gate:
Their parents are dummy clock, we only needs to enable
it after system boots up.
- usbphy1 and usbphy2
Usage reserved bit for this clock, in that case, the refcount
will be updated, but without hardware changing.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
---
Changes for v4:
- Add usbphy1_gate and usbphy2_gate to binding doc
Besides, this patch will be not related with driver
change anymore, so platform maintainer can queue
it separately.

Changes for v3:
- Add new clk for usbphy clk gate which is only used 
at system boots up process.

Changes for v2:
- Use reserved bit for usb phy clk control

 .../devicetree/bindings/clock/imx6q-clock.txt      |    2 +
 arch/arm/mach-imx/clk-imx6q.c                      |   26 ++++++++++++++++---
 2 files changed, 24 insertions(+), 4 deletions(-)

Comments

Shawn Guo Jan. 18, 2013, 2:55 a.m. UTC | #1
On Fri, Jan 18, 2013 at 10:38:05AM +0800, Peter Chen wrote:
> This mxs usbphy is only needs to be on after system boots
> up, and software never needs to control it anymore.
> Meanwhile, usbphy's parent needs to be notified if usb
> is suspend or not. So we design below mxs usbphy usage:
> 
> - usbphy1_gate and usbphy2_gate:
> Their parents are dummy clock, we only needs to enable
> it after system boots up.
> - usbphy1 and usbphy2
> Usage reserved bit for this clock, in that case, the refcount
> will be updated, but without hardware changing.
> 
> Signed-off-by: Peter Chen <peter.chen@freescale.com>

Applied, thanks.
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
index d77b4e6..d57ef36 100644
--- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt
+++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt
@@ -203,6 +203,8 @@  clocks and IDs.
 	pcie_ref		188
 	pcie_ref_125m		189
 	enet_ref		190
+	usbphy1_gate		191
+	usbphy2_gate		192
 
 Examples:
 
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 7f2c10c..ccb24cf 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -154,8 +154,8 @@  enum mx6q_clks {
 	usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
 	pll4_audio, pll5_video, pll8_mlb, pll7_usb_host, pll6_enet, ssi1_ipg,
 	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
-	sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref,
-	clk_max
+	sata_ref, sata_ref_100m, pcie_ref, pcie_ref_125m, enet_ref, usbphy1_gate,
+	usbphy2_gate, clk_max
 };
 
 static struct clk *clk[clk_max];
@@ -208,8 +208,21 @@  int __init mx6q_clocks_init(void)
 	clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB,	"pll7_usb_host","osc", base + 0x20, 0x3);
 	clk[pll8_mlb]      = imx_clk_pllv3(IMX_PLLV3_MLB,	"pll8_mlb",	"osc", base + 0xd0, 0x0);
 
-	clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 6);
-	clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 6);
+	/*
+	 * Bit 20 is the reserved and read-only bit, we do this only for:
+	 * - Do nothing for usbphy clk_enable/disable
+	 * - Keep refcount when do usbphy clk_enable/disable, in that case,
+	 * the clk framework may need to enable/disable usbphy's parent
+	 */
+	clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 20);
+	clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 20);
+
+	/*
+	 * usbphy*_gate needs to be on after system boots up, and software
+	 * never needs to control it anymore.
+	 */
+	clk[usbphy1_gate] = imx_clk_gate("usbphy1_gate", "dummy", base + 0x10, 6);
+	clk[usbphy2_gate] = imx_clk_gate("usbphy2_gate", "dummy", base + 0x20, 6);
 
 	clk[sata_ref] = imx_clk_fixed_factor("sata_ref", "pll6_enet", 1, 5);
 	clk[pcie_ref] = imx_clk_fixed_factor("pcie_ref", "pll6_enet", 1, 4);
@@ -436,6 +449,11 @@  int __init mx6q_clocks_init(void)
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
 		clk_prepare_enable(clk[clks_init_on[i]]);
 
+	if (IS_ENABLED(CONFIG_USB_MXS_PHY)) {
+		clk_prepare_enable(clk[usbphy1_gate]);
+		clk_prepare_enable(clk[usbphy2_gate]);
+	}
+
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);