diff mbox

[4/4,v3] pinctrl/abx500: add AB8500 pinctrl driver

Message ID 1358777614-12760-1-git-send-email-linus.walleij@stericsson.com (mailing list archive)
State New, archived
Headers show

Commit Message

Linus Walleij Jan. 21, 2013, 2:13 p.m. UTC
From: Patrice Chotard <patrice.chotard@st.com>

This adds a subdriver for the AB8500 pinctrl portions.

Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v2->v3:
- Actually commit the changes dropping the _ranges_ infix.
ChangeLog v1->v2:
- Move definition of init functions over to this patch from
  the core patch so we don't have unimplemented functions defined
  in the kernel.
- Drop a few "_ranges_" substrings wher unappropriate.
---
 arch/arm/mach-ux500/Kconfig      |   1 +
 drivers/pinctrl/Kconfig          |   4 +
 drivers/pinctrl/Makefile         |   1 +
 drivers/pinctrl/pinctrl-ab8500.c | 485 +++++++++++++++++++++++++++++++++++++++
 drivers/pinctrl/pinctrl-abx500.c |   3 +
 drivers/pinctrl/pinctrl-abx500.h |  13 ++
 6 files changed, 507 insertions(+)
 create mode 100644 drivers/pinctrl/pinctrl-ab8500.c
diff mbox

Patch

diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 2c090d7..31f1b5a 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -19,6 +19,7 @@  config UX500_SOC_DB8500
 	select CPU_FREQ_TABLE if CPU_FREQ
 	select MFD_DB8500_PRCMU
 	select PINCTRL_DB8500
+	select PINCTRL_AB8500
 	select REGULATOR
 	select REGULATOR_DB8500_PRCMU
 
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index ba3038c..367556f 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -33,6 +33,10 @@  config PINCTRL_ABX500
 	help
 	  Select this to enable the ABx500 family IC GPIO driver
 
+config PINCTRL_AB8500
+	bool "AB8500 pin controller driver"
+	depends on PINCTRL_ABX500 && ARCH_U8500
+
 config PINCTRL_AT91
 	bool "AT91 pinctrl driver"
 	depends on OF
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index ead4fa7..aad5c93 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -10,6 +10,7 @@  obj-$(CONFIG_PINCTRL)		+= devicetree.o
 endif
 obj-$(CONFIG_GENERIC_PINCONF)	+= pinconf-generic.o
 obj-$(CONFIG_PINCTRL_ABX500)	+= pinctrl-abx500.o
+obj-$(CONFIG_PINCTRL_AB8500)	+= pinctrl-ab8500.o
 obj-$(CONFIG_PINCTRL_AT91)	+= pinctrl-at91.o
 obj-$(CONFIG_PINCTRL_BCM2835)	+= pinctrl-bcm2835.o
 obj-$(CONFIG_PINCTRL_IMX)	+= pinctrl-imx.o
diff --git a/drivers/pinctrl/pinctrl-ab8500.c b/drivers/pinctrl/pinctrl-ab8500.c
new file mode 100644
index 0000000..6495390
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-ab8500.c
@@ -0,0 +1,485 @@ 
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * Author: Patrice Chotard <patrice.chotard@stericsson.com> for ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include "pinctrl-abx500.h"
+
+/* All the pins that can be used for GPIO and some other functions */
+#define ABX500_GPIO(offset)		(offset)
+
+#define AB8500_PIN_T10		ABX500_GPIO(1)
+#define AB8500_PIN_T9		ABX500_GPIO(2)
+#define AB8500_PIN_U9		ABX500_GPIO(3)
+#define AB8500_PIN_W2		ABX500_GPIO(4)
+/* hole */
+#define AB8500_PIN_Y18		ABX500_GPIO(6)
+#define AB8500_PIN_AA20		ABX500_GPIO(7)
+#define AB8500_PIN_W18		ABX500_GPIO(8)
+#define AB8500_PIN_AA19		ABX500_GPIO(9)
+#define AB8500_PIN_U17		ABX500_GPIO(10)
+#define AB8500_PIN_AA18		ABX500_GPIO(11)
+#define AB8500_PIN_U16		ABX500_GPIO(12)
+#define AB8500_PIN_W17		ABX500_GPIO(13)
+#define AB8500_PIN_F14		ABX500_GPIO(14)
+#define AB8500_PIN_B17		ABX500_GPIO(15)
+#define AB8500_PIN_F15		ABX500_GPIO(16)
+#define AB8500_PIN_P5		ABX500_GPIO(17)
+#define AB8500_PIN_R5		ABX500_GPIO(18)
+#define AB8500_PIN_U5		ABX500_GPIO(19)
+#define AB8500_PIN_T5		ABX500_GPIO(20)
+#define AB8500_PIN_H19		ABX500_GPIO(21)
+#define AB8500_PIN_G20		ABX500_GPIO(22)
+#define AB8500_PIN_G19		ABX500_GPIO(23)
+#define AB8500_PIN_T14		ABX500_GPIO(24)
+#define AB8500_PIN_R16		ABX500_GPIO(25)
+#define AB8500_PIN_M16		ABX500_GPIO(26)
+#define AB8500_PIN_J6		ABX500_GPIO(27)
+#define AB8500_PIN_K6		ABX500_GPIO(28)
+#define AB8500_PIN_G6		ABX500_GPIO(29)
+#define AB8500_PIN_H6		ABX500_GPIO(30)
+#define AB8500_PIN_F5		ABX500_GPIO(31)
+#define AB8500_PIN_G5		ABX500_GPIO(32)
+/* hole */
+#define AB8500_PIN_R17		ABX500_GPIO(34)
+#define AB8500_PIN_W15		ABX500_GPIO(35)
+#define AB8500_PIN_A17		ABX500_GPIO(36)
+#define AB8500_PIN_E15		ABX500_GPIO(37)
+#define AB8500_PIN_C17		ABX500_GPIO(38)
+#define AB8500_PIN_E16		ABX500_GPIO(39)
+#define AB8500_PIN_T19		ABX500_GPIO(40)
+#define AB8500_PIN_U19		ABX500_GPIO(41)
+#define AB8500_PIN_U2		ABX500_GPIO(42)
+
+/* indicates the highest GPIO number */
+#define AB8500_GPIO_MAX_NUMBER	42
+
+/*
+ * The names of the pins are denoted by GPIO number and ball name, even
+ * though they can be used for other things than GPIO, this is the first
+ * column in the table of the data sheet and often used on schematics and
+ * such.
+ */
+static const struct pinctrl_pin_desc ab8500_pins[] = {
+	PINCTRL_PIN(AB8500_PIN_T10, "GPIO1_T10"),
+	PINCTRL_PIN(AB8500_PIN_T9, "GPIO2_T9"),
+	PINCTRL_PIN(AB8500_PIN_U9, "GPIO3_U9"),
+	PINCTRL_PIN(AB8500_PIN_W2, "GPIO4_W2"),
+	/* hole */
+	PINCTRL_PIN(AB8500_PIN_Y18, "GPIO6_Y18"),
+	PINCTRL_PIN(AB8500_PIN_AA20, "GPIO7_AA20"),
+	PINCTRL_PIN(AB8500_PIN_W18, "GPIO8_W18"),
+	PINCTRL_PIN(AB8500_PIN_AA19, "GPIO9_AA19"),
+	PINCTRL_PIN(AB8500_PIN_U17, "GPIO10_U17"),
+	PINCTRL_PIN(AB8500_PIN_AA18, "GPIO11_AA18"),
+	PINCTRL_PIN(AB8500_PIN_U16, "GPIO12_U16"),
+	PINCTRL_PIN(AB8500_PIN_W17, "GPIO13_W17"),
+	PINCTRL_PIN(AB8500_PIN_F14, "GPIO14_F14"),
+	PINCTRL_PIN(AB8500_PIN_B17, "GPIO15_B17"),
+	PINCTRL_PIN(AB8500_PIN_F15, "GPIO16_F15"),
+	PINCTRL_PIN(AB8500_PIN_P5, "GPIO17_P5"),
+	PINCTRL_PIN(AB8500_PIN_R5, "GPIO18_R5"),
+	PINCTRL_PIN(AB8500_PIN_U5, "GPIO19_U5"),
+	PINCTRL_PIN(AB8500_PIN_T5, "GPIO20_T5"),
+	PINCTRL_PIN(AB8500_PIN_H19, "GPIO21_H19"),
+	PINCTRL_PIN(AB8500_PIN_G20, "GPIO22_G20"),
+	PINCTRL_PIN(AB8500_PIN_G19, "GPIO23_G19"),
+	PINCTRL_PIN(AB8500_PIN_T14, "GPIO24_T14"),
+	PINCTRL_PIN(AB8500_PIN_R16, "GPIO25_R16"),
+	PINCTRL_PIN(AB8500_PIN_M16, "GPIO26_M16"),
+	PINCTRL_PIN(AB8500_PIN_J6, "GPIO27_J6"),
+	PINCTRL_PIN(AB8500_PIN_K6, "GPIO28_K6"),
+	PINCTRL_PIN(AB8500_PIN_G6, "GPIO29_G6"),
+	PINCTRL_PIN(AB8500_PIN_H6, "GPIO30_H6"),
+	PINCTRL_PIN(AB8500_PIN_F5, "GPIO31_F5"),
+	PINCTRL_PIN(AB8500_PIN_G5, "GPIO32_G5"),
+	/* hole */
+	PINCTRL_PIN(AB8500_PIN_R17, "GPIO34_R17"),
+	PINCTRL_PIN(AB8500_PIN_W15, "GPIO35_W15"),
+	PINCTRL_PIN(AB8500_PIN_A17, "GPIO36_A17"),
+	PINCTRL_PIN(AB8500_PIN_E15, "GPIO37_E15"),
+	PINCTRL_PIN(AB8500_PIN_C17, "GPIO38_C17"),
+	PINCTRL_PIN(AB8500_PIN_E16, "GPIO39_E16"),
+	PINCTRL_PIN(AB8500_PIN_T19, "GPIO40_T19"),
+	PINCTRL_PIN(AB8500_PIN_U19, "GPIO41_U19"),
+	PINCTRL_PIN(AB8500_PIN_U2, "GPIO42_U2"),
+};
+
+/*
+ * Maps local GPIO offsets to local pin numbers
+ */
+static const struct abx500_pinrange ab8500_pinranges[] = {
+	ABX500_PINRANGE(1, 4, ABX500_ALT_A),
+	ABX500_PINRANGE(6, 4, ABX500_ALT_A),
+	ABX500_PINRANGE(10, 4, ABX500_DEFAULT),
+	ABX500_PINRANGE(14, 12, ABX500_ALT_A),
+	ABX500_PINRANGE(26, 1, ABX500_DEFAULT),
+	ABX500_PINRANGE(27, 6, ABX500_ALT_A),
+	ABX500_PINRANGE(34, 1, ABX500_ALT_A),
+	ABX500_PINRANGE(35, 1, ABX500_DEFAULT),
+	ABX500_PINRANGE(36, 7, ABX500_ALT_A),
+};
+
+/*
+ * Read the pin group names like this:
+ * sysclkreq2_d_1 = first groups of pins for sysclkreq2 on default function
+ *
+ * The groups are arranged as sets per altfunction column, so we can
+ * mux in one group at a time by selecting the same altfunction for them
+ * all. When functions require pins on different altfunctions, you need
+ * to combine several groups.
+ */
+
+/* default column */
+static const unsigned sysclkreq2_d_1_pins[] = { AB8500_PIN_T10 };
+static const unsigned sysclkreq3_d_1_pins[] = { AB8500_PIN_T9 };
+static const unsigned sysclkreq4_d_1_pins[] = { AB8500_PIN_U9 };
+static const unsigned sysclkreq6_d_1_pins[] = { AB8500_PIN_W2 };
+static const unsigned ycbcr0123_d_1_pins[] = { AB8500_PIN_Y18, AB8500_PIN_AA20,
+					AB8500_PIN_W18, AB8500_PIN_AA19};
+static const unsigned gpio10_d_1_pins[] = { AB8500_PIN_U17 };
+static const unsigned gpio11_d_1_pins[] = { AB8500_PIN_AA18 };
+static const unsigned gpio12_d_1_pins[] = { AB8500_PIN_U16 };
+static const unsigned gpio13_d_1_pins[] = { AB8500_PIN_W17 };
+static const unsigned pwmout1_d_1_pins[] = { AB8500_PIN_F14 };
+static const unsigned pwmout2_d_1_pins[] = { AB8500_PIN_B17 };
+static const unsigned pwmout3_d_1_pins[] = { AB8500_PIN_F15 };
+
+/* audio data interface 1*/
+static const unsigned adi1_d_1_pins[] = { AB8500_PIN_P5, AB8500_PIN_R5,
+					AB8500_PIN_U5, AB8500_PIN_T5 };
+/* USBUICC */
+static const unsigned usbuicc_d_1_pins[] = { AB8500_PIN_H19, AB8500_PIN_G20,
+					AB8500_PIN_G19 };
+static const unsigned sysclkreq7_d_1_pins[] = { AB8500_PIN_T14 };
+static const unsigned sysclkreq8_d_1_pins[] = { AB8500_PIN_R16 };
+static const unsigned gpio26_d_1_pins[] = { AB8500_PIN_M16 };
+/* Digital microphone 1 and 2 */
+static const unsigned dmic12_d_1_pins[] = { AB8500_PIN_J6, AB8500_PIN_K6 };
+/* Digital microphone 3 and 4 */
+static const unsigned dmic34_d_1_pins[] = { AB8500_PIN_G6, AB8500_PIN_H6 };
+/* Digital microphone 5 and 6 */
+static const unsigned dmic56_d_1_pins[] = { AB8500_PIN_F5, AB8500_PIN_G5 };
+static const unsigned extcpena_d_1_pins[] = { AB8500_PIN_R17 };
+static const unsigned gpio35_d_1_pins[] = { AB8500_PIN_W15 };
+/* APE SPI */
+static const unsigned apespi_d_1_pins[] = { AB8500_PIN_A17, AB8500_PIN_E15,
+					AB8500_PIN_C17, AB8500_PIN_E16};
+/* modem SDA/SCL */
+static const unsigned modsclsda_d_1_pins[] = { AB8500_PIN_T19, AB8500_PIN_U19 };
+static const unsigned sysclkreq5_d_1_pins[] = { AB8500_PIN_U2 };
+
+/* Altfunction A column */
+static const unsigned gpio1_a_1_pins[] = { AB8500_PIN_T10 };
+static const unsigned gpio2_a_1_pins[] = { AB8500_PIN_T9 };
+static const unsigned gpio3_a_1_pins[] = { AB8500_PIN_U9 };
+static const unsigned gpio4_a_1_pins[] = { AB8500_PIN_W2 };
+static const unsigned gpio6_a_1_pins[] = { AB8500_PIN_Y18 };
+static const unsigned gpio7_a_1_pins[] = { AB8500_PIN_AA20 };
+static const unsigned gpio8_a_1_pins[] = { AB8500_PIN_W18 };
+static const unsigned gpio9_a_1_pins[] = { AB8500_PIN_AA19 };
+/* YCbCr4 YCbCr5 YCbCr6 YCbCr7*/
+static const unsigned ycbcr4567_a_1_pins[] = { AB8500_PIN_U17, AB8500_PIN_AA18,
+					AB8500_PIN_U16, AB8500_PIN_W17};
+static const unsigned gpio14_a_1_pins[] = { AB8500_PIN_F14 };
+static const unsigned gpio15_a_1_pins[] = { AB8500_PIN_B17 };
+static const unsigned gpio16_a_1_pins[] = { AB8500_PIN_F15 };
+static const unsigned gpio17_a_1_pins[] = { AB8500_PIN_P5 };
+static const unsigned gpio18_a_1_pins[] = { AB8500_PIN_R5 };
+static const unsigned gpio19_a_1_pins[] = { AB8500_PIN_U5 };
+static const unsigned gpio20_a_1_pins[] = { AB8500_PIN_T5 };
+static const unsigned gpio21_a_1_pins[] = { AB8500_PIN_H19 };
+static const unsigned gpio22_a_1_pins[] = { AB8500_PIN_G20 };
+static const unsigned gpio23_a_1_pins[] = { AB8500_PIN_G19 };
+static const unsigned gpio24_a_1_pins[] = { AB8500_PIN_T14 };
+static const unsigned gpio25_a_1_pins[] = { AB8500_PIN_R16 };
+static const unsigned gpio27_a_1_pins[] = { AB8500_PIN_J6 };
+static const unsigned gpio28_a_1_pins[] = { AB8500_PIN_K6 };
+static const unsigned gpio29_a_1_pins[] = { AB8500_PIN_G6 };
+static const unsigned gpio30_a_1_pins[] = { AB8500_PIN_H6 };
+static const unsigned gpio31_a_1_pins[] = { AB8500_PIN_F5 };
+static const unsigned gpio32_a_1_pins[] = { AB8500_PIN_G5 };
+static const unsigned gpio34_a_1_pins[] = { AB8500_PIN_R17 };
+static const unsigned gpio36_a_1_pins[] = { AB8500_PIN_A17 };
+static const unsigned gpio37_a_1_pins[] = { AB8500_PIN_E15 };
+static const unsigned gpio38_a_1_pins[] = { AB8500_PIN_C17 };
+static const unsigned gpio39_a_1_pins[] = { AB8500_PIN_E16 };
+static const unsigned gpio40_a_1_pins[] = { AB8500_PIN_T19 };
+static const unsigned gpio41_a_1_pins[] = { AB8500_PIN_U19 };
+static const unsigned gpio42_a_1_pins[] = { AB8500_PIN_U2 };
+
+/* Altfunction B colum */
+static const unsigned hiqclkena_b_1_pins[] = { AB8500_PIN_U17 };
+static const unsigned usbuiccpd_b_1_pins[] = { AB8500_PIN_AA18 };
+static const unsigned i2ctrig1_b_1_pins[] = { AB8500_PIN_U16 };
+static const unsigned i2ctrig2_b_1_pins[] = { AB8500_PIN_W17 };
+
+/* Altfunction C column */
+static const unsigned usbvdat_c_1_pins[] = { AB8500_PIN_W17 };
+
+
+#define AB8500_PIN_GROUP(a, b) { .name = #a, .pins = a##_pins,		\
+			.npins = ARRAY_SIZE(a##_pins), .altsetting = b }
+
+static const struct abx500_pingroup ab8500_groups[] = {
+	/* default column */
+	AB8500_PIN_GROUP(sysclkreq2_d_1, ABX500_DEFAULT),
+	AB8500_PIN_GROUP(sysclkreq3_d_1, ABX500_DEFAULT),
+	AB8500_PIN_GROUP(sysclkreq4_d_1, ABX500_DEFAULT),
+	AB8500_PIN_GROUP(sysclkreq6_d_1, ABX500_DEFAULT),
+	AB8500_PIN_GROUP(ycbcr0123_d_1, ABX500_DEFAULT),
+	AB8500_PIN_GROUP(gpio10_d_1, ABX500_DEFAULT),
+	AB8500_PIN_GROUP(gpio11_d_1, ABX500_DEFAULT),
+	AB8500_PIN_GROUP(gpio12_d_1, ABX500_DEFAULT),
+	AB8500_PIN_GROUP(gpio13_d_1, ABX500_DEFAULT),
+	AB8500_PIN_GROUP(pwmout1_d_1, ABX500_DEFAULT),
+	AB8500_PIN_GROUP(pwmout2_d_1, ABX500_DEFAULT),
+	AB8500_PIN_GROUP(pwmout3_d_1, ABX500_DEFAULT),
+	AB8500_PIN_GROUP(adi1_d_1, ABX500_DEFAULT),
+	AB8500_PIN_GROUP(usbuicc_d_1, ABX500_DEFAULT),
+	AB8500_PIN_GROUP(sysclkreq7_d_1, ABX500_DEFAULT),
+	AB8500_PIN_GROUP(sysclkreq8_d_1, ABX500_DEFAULT),
+	AB8500_PIN_GROUP(gpio26_d_1, ABX500_DEFAULT),
+	AB8500_PIN_GROUP(dmic12_d_1, ABX500_DEFAULT),
+	AB8500_PIN_GROUP(dmic34_d_1, ABX500_DEFAULT),
+	AB8500_PIN_GROUP(dmic56_d_1, ABX500_DEFAULT),
+	AB8500_PIN_GROUP(extcpena_d_1, ABX500_DEFAULT),
+	AB8500_PIN_GROUP(gpio35_d_1, ABX500_DEFAULT),
+	AB8500_PIN_GROUP(apespi_d_1, ABX500_DEFAULT),
+	AB8500_PIN_GROUP(modsclsda_d_1, ABX500_DEFAULT),
+	AB8500_PIN_GROUP(sysclkreq5_d_1, ABX500_DEFAULT),
+	/* Altfunction A column */
+	AB8500_PIN_GROUP(gpio1_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio2_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio3_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio4_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio6_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio7_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio8_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio9_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(ycbcr4567_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio14_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio15_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio16_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio17_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio18_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio19_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio20_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio21_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio22_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio23_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio24_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio25_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio27_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio28_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio29_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio30_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio31_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio32_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio34_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio36_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio37_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio38_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio39_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio40_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio41_a_1, ABX500_ALT_A),
+	AB8500_PIN_GROUP(gpio42_a_1, ABX500_ALT_A),
+	/* Altfunction B column */
+	AB8500_PIN_GROUP(hiqclkena_b_1, ABX500_ALT_B),
+	AB8500_PIN_GROUP(usbuiccpd_b_1, ABX500_ALT_B),
+	AB8500_PIN_GROUP(i2ctrig1_b_1, ABX500_ALT_B),
+	AB8500_PIN_GROUP(i2ctrig2_b_1, ABX500_ALT_B),
+	/* Altfunction C column */
+	AB8500_PIN_GROUP(usbvdat_c_1, ABX500_ALT_C),
+};
+
+/* We use this macro to define the groups applicable to a function */
+#define AB8500_FUNC_GROUPS(a, b...)	   \
+static const char * const a##_groups[] = { b };
+
+AB8500_FUNC_GROUPS(sysclkreq, "sysclkreq2_d_1", "sysclkreq3_d_1",
+		"sysclkreq4_d_1", "sysclkreq5_d_1", "sysclkreq6_d_1",
+		"sysclkreq7_d_1", "sysclkreq8_d_1");
+AB8500_FUNC_GROUPS(ycbcr, "ycbcr0123_d_1", "ycbcr4567_a_1");
+AB8500_FUNC_GROUPS(gpio, "gpio1_a_1", "gpio2_a_1", "gpio3_a_1", "gpio4_a_1",
+		"gpio6_a_1", "gpio7_a_1", "gpio8_a_1", "gpio9_a_1",
+		"gpio10_d_1", "gpio11_d_1", "gpio12_d_1", "gpio13_d_1",
+		"gpio14_a_1", "gpio15_a_1", "gpio16_a_1", "gpio17_a_1",
+		"gpio18_a_1", "gpio19_a_1", "gpio20_a_1", "gpio21_a_1",
+		"gpio22_a_1", "gpio23_a_1", "gpio24_a_1", "gpio25_a_1",
+		"gpio26_d_1", "gpio27_a_1", "gpio28_a_1", "gpio29_a_1",
+		"gpio30_a_1", "gpio31_a_1", "gpio32_a_1", "gpio34_a_1",
+		"gpio35_d_1", "gpio36_a_1", "gpio37_a_1", "gpio38_a_1",
+		"gpio39_a_1", "gpio40_a_1", "gpio41_a_1", "gpio42_a_1");
+AB8500_FUNC_GROUPS(pwmout, "pwmout1_d_1", "pwmout2_d_1", "pwmout3_d_1");
+AB8500_FUNC_GROUPS(adi1, "adi1_d_1");
+AB8500_FUNC_GROUPS(usbuicc, "usbuicc_d_1", "usbuiccpd_b_1");
+AB8500_FUNC_GROUPS(dmic, "dmic12_d_1", "dmic34_d_1", "dmic56_d_1");
+AB8500_FUNC_GROUPS(extcpena, "extcpena_d_1");
+AB8500_FUNC_GROUPS(apespi, "apespi_d_1");
+AB8500_FUNC_GROUPS(modsclsda, "modsclsda_d_1");
+AB8500_FUNC_GROUPS(hiqclkena, "hiqclkena_b_1");
+AB8500_FUNC_GROUPS(i2ctrig, "i2ctrig1_b_1", "i2ctrig2_b_1");
+AB8500_FUNC_GROUPS(usbvdat, "usbvdat_c_1");
+
+#define FUNCTION(fname)					\
+	{						\
+		.name = #fname,				\
+		.groups = fname##_groups,		\
+		.ngroups = ARRAY_SIZE(fname##_groups),	\
+	}
+
+static const struct abx500_function ab8500_functions[] = {
+	FUNCTION(sysclkreq),
+	FUNCTION(ycbcr),
+	FUNCTION(gpio),
+	FUNCTION(pwmout),
+	FUNCTION(adi1),
+	FUNCTION(usbuicc),
+	FUNCTION(dmic),
+	FUNCTION(extcpena),
+	FUNCTION(apespi),
+	FUNCTION(modsclsda),
+	FUNCTION(hiqclkena),
+	FUNCTION(i2ctrig),
+	FUNCTION(usbvdat),
+};
+
+/*
+ * this table translates what's is in the AB8500 specification regarding the
+ * balls alternate functions (as for DB, default, ALT_A, ALT_B and ALT_C).
+ * ALTERNATE_FUNCTIONS(GPIO_NUMBER, GPIOSEL bit, ALTERNATFUNC bit1,
+ * ALTERNATEFUNC bit2, ALTA val, ALTB val, ALTC val),
+ *
+ * example :
+ *
+ *	ALTERNATE_FUNCTIONS(13,     4,      3,      4, 0, 1 ,2),
+ *	means that pin AB8500_PIN_W17 (pin 13) supports 4 mux (default/ALT_A,
+ *	ALT_B and ALT_C), so GPIOSEL and ALTERNATFUNC registers are used to
+ *	select the mux.  ALTA, ALTB and ALTC val indicates values to write in
+ *	ALTERNATFUNC register. We need to specifies these values as SOC
+ *	designers didn't apply the same logic on how to select mux in the
+ *	ABx500 family.
+ *
+ *	As this pins supports at least ALT_B mux, default mux is
+ *	selected by writing 1 in GPIOSEL bit :
+ *
+ *		| GPIOSEL bit=4 | alternatfunc bit2=4 | alternatfunc bit1=3
+ *	default	|       1       |          0          |          0
+ *	alt_A	|       0       |          0          |          0
+ *	alt_B	|       0       |          0          |          1
+ *	alt_C	|       0       |          1          |          0
+ *
+ *	ALTERNATE_FUNCTIONS(8,      7, UNUSED, UNUSED),
+ *	means that pin AB8500_PIN_W18 (pin 8) supports 2 mux, so only GPIOSEL
+ *	register is used to select the mux. As this pins doesn't support at
+ *	least ALT_B mux, default mux is by writing 0 in GPIOSEL bit :
+ *
+ *		| GPIOSEL bit=7 | alternatfunc bit2=  | alternatfunc bit1=
+ *	default	|       0       |          0          |          0
+ *	alt_A	|       1       |          0          |          0
+ */
+
+struct alternate_functions ab8500_alternate_functions[AB8500_GPIO_MAX_NUMBER + 1] = {
+	ALTERNATE_FUNCTIONS(0, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO0 */
+	ALTERNATE_FUNCTIONS(1,	    0, UNUSED, UNUSED, 0, 0, 0), /* GPIO1, altA controlled by bit 0 */
+	ALTERNATE_FUNCTIONS(2,      1, UNUSED, UNUSED, 0, 0, 0), /* GPIO2, altA controlled by bit 1 */
+	ALTERNATE_FUNCTIONS(3,      2, UNUSED, UNUSED, 0, 0, 0), /* GPIO3, altA controlled by bit 2*/
+	ALTERNATE_FUNCTIONS(4,      3, UNUSED, UNUSED, 0, 0, 0), /* GPIO4, altA controlled by bit 3*/
+	/* bit 4 reserved */
+	ALTERNATE_FUNCTIONS(5, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO5 */
+	ALTERNATE_FUNCTIONS(6,      5, UNUSED, UNUSED, 0, 0, 0), /* GPIO6, altA controlled by bit 5*/
+	ALTERNATE_FUNCTIONS(7,      6, UNUSED, UNUSED, 0, 0, 0), /* GPIO7, altA controlled by bit 6*/
+	ALTERNATE_FUNCTIONS(8,      7, UNUSED, UNUSED, 0, 0, 0), /* GPIO8, altA controlled by bit 7*/
+
+	ALTERNATE_FUNCTIONS(9,      0, UNUSED, UNUSED, 0, 0, 0), /* GPIO9, altA controlled by bit 0*/
+	ALTERNATE_FUNCTIONS(10,     1,      0, UNUSED, 0, 1, 0), /* GPIO10, altA and altB controlled by bit 0 */
+	ALTERNATE_FUNCTIONS(11,     2,      1, UNUSED, 0, 1, 0), /* GPIO11, altA and altB controlled by bit 1 */
+	ALTERNATE_FUNCTIONS(12,     3,      2, UNUSED, 0, 1, 0), /* GPIO12, altA and altB controlled by bit 2 */
+	ALTERNATE_FUNCTIONS(13,     4,      3,      4, 0, 1, 2), /* GPIO13, altA altB and altC controlled by bit 3 and 4 */
+	ALTERNATE_FUNCTIONS(14,     5, UNUSED, UNUSED, 0, 0, 0), /* GPIO14, altA controlled by bit 5 */
+	ALTERNATE_FUNCTIONS(15,     6, UNUSED, UNUSED, 0, 0, 0), /* GPIO15, altA controlled by bit 6 */
+	ALTERNATE_FUNCTIONS(16,     7, UNUSED, UNUSED, 0, 0, 0), /* GPIO16, altA controlled by bit 7 */
+	/*
+	 * pins 17 to 20 are special case, only bit 0 is used to select
+	 * alternate function for these 4 pins.
+	 * bits 1 to 3 are reserved
+	 */
+	ALTERNATE_FUNCTIONS(17,      0, UNUSED, UNUSED, 0, 0, 0), /* GPIO17, altA controlled by bit 0 */
+	ALTERNATE_FUNCTIONS(18,      0, UNUSED, UNUSED, 0, 0, 0), /* GPIO18, altA controlled by bit 0 */
+	ALTERNATE_FUNCTIONS(19,      0, UNUSED, UNUSED, 0, 0, 0), /* GPIO19, altA controlled by bit 0 */
+	ALTERNATE_FUNCTIONS(20,      0, UNUSED, UNUSED, 0, 0, 0), /* GPIO20, altA controlled by bit 0 */
+	ALTERNATE_FUNCTIONS(21,      4, UNUSED, UNUSED, 0, 0, 0), /* GPIO21, altA controlled by bit 4 */
+	ALTERNATE_FUNCTIONS(22,      5, UNUSED, UNUSED, 0, 0, 0), /* GPIO22, altA controlled by bit 5 */
+	ALTERNATE_FUNCTIONS(23,      6, UNUSED, UNUSED, 0, 0, 0), /* GPIO23, altA controlled by bit 6 */
+	ALTERNATE_FUNCTIONS(24,      7, UNUSED, UNUSED, 0, 0, 0), /* GPIO24, altA controlled by bit 7 */
+
+	ALTERNATE_FUNCTIONS(25,      0, UNUSED, UNUSED, 0, 0, 0), /* GPIO25, altA controlled by bit 0 */
+	/* pin 26 special case, no alternate function, bit 1 reserved */
+	ALTERNATE_FUNCTIONS(26, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* GPIO26 */
+	ALTERNATE_FUNCTIONS(27,      2, UNUSED, UNUSED, 0, 0, 0), /* GPIO27, altA controlled by bit 2 */
+	ALTERNATE_FUNCTIONS(28,      3, UNUSED, UNUSED, 0, 0, 0), /* GPIO28, altA controlled by bit 3 */
+	ALTERNATE_FUNCTIONS(29,      4, UNUSED, UNUSED, 0, 0, 0), /* GPIO29, altA controlled by bit 4 */
+	ALTERNATE_FUNCTIONS(30,      5, UNUSED, UNUSED, 0, 0, 0), /* GPIO30, altA controlled by bit 5 */
+	ALTERNATE_FUNCTIONS(31,      6, UNUSED, UNUSED, 0, 0, 0), /* GPIO31, altA controlled by bit 6 */
+	ALTERNATE_FUNCTIONS(32,      7, UNUSED, UNUSED, 0, 0, 0), /* GPIO32, altA controlled by bit 7 */
+
+	ALTERNATE_FUNCTIONS(33, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO33 */
+	ALTERNATE_FUNCTIONS(34,      1, UNUSED, UNUSED, 0, 0, 0), /* GPIO34, altA controlled by bit 1 */
+	/* pin 35 special case, no alternate function, bit 2 reserved */
+	ALTERNATE_FUNCTIONS(35, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* GPIO35 */
+	ALTERNATE_FUNCTIONS(36,      3, UNUSED, UNUSED, 0, 0, 0), /* GPIO36, altA controlled by bit 3 */
+	ALTERNATE_FUNCTIONS(37,      4, UNUSED, UNUSED, 0, 0, 0), /* GPIO37, altA controlled by bit 4 */
+	ALTERNATE_FUNCTIONS(38,      5, UNUSED, UNUSED, 0, 0, 0), /* GPIO38, altA controlled by bit 5 */
+	ALTERNATE_FUNCTIONS(39,      6, UNUSED, UNUSED, 0, 0, 0), /* GPIO39, altA controlled by bit 6 */
+	ALTERNATE_FUNCTIONS(40,      7, UNUSED, UNUSED, 0, 0, 0), /* GPIO40, altA controlled by bit 7 */
+
+	ALTERNATE_FUNCTIONS(41,      0, UNUSED, UNUSED, 0, 0, 0), /* GPIO41, altA controlled by bit 0 */
+	ALTERNATE_FUNCTIONS(42,      1, UNUSED, UNUSED, 0, 0, 0), /* GPIO42, altA controlled by bit 1 */
+};
+
+/*
+ * Only some GPIOs are interrupt capable, and they are
+ * organized in discontiguous clusters:
+ *
+ *	GPIO6 to GPIO13
+ *	GPIO24 and GPIO25
+ *	GPIO36 to GPIO41
+ */
+struct abx500_gpio_irq_cluster ab8500_gpio_irq_cluster[] = {
+	GPIO_IRQ_CLUSTER(5, 12, 0), /* GPIO numbers start from 1 */
+	GPIO_IRQ_CLUSTER(23, 24, 0),
+	GPIO_IRQ_CLUSTER(35, 40, 0),
+};
+
+static struct abx500_pinctrl_soc_data ab8500_soc = {
+	.gpio_ranges = ab8500_pinranges,
+	.gpio_num_ranges = ARRAY_SIZE(ab8500_pinranges),
+	.pins = ab8500_pins,
+	.npins = ARRAY_SIZE(ab8500_pins),
+	.functions = ab8500_functions,
+	.nfunctions = ARRAY_SIZE(ab8500_functions),
+	.groups = ab8500_groups,
+	.ngroups = ARRAY_SIZE(ab8500_groups),
+	.alternate_functions = ab8500_alternate_functions,
+	.gpio_irq_cluster = ab8500_gpio_irq_cluster,
+	.ngpio_irq_cluster = ARRAY_SIZE(ab8500_gpio_irq_cluster),
+	.irq_gpio_rising_offset = AB8500_INT_GPIO6R,
+	.irq_gpio_falling_offset = AB8500_INT_GPIO6F,
+	.irq_gpio_factor = 1,
+};
+
+void __devinit
+abx500_pinctrl_ab8500_init(struct abx500_pinctrl_soc_data **soc)
+{
+	*soc = &ab8500_soc;
+}
diff --git a/drivers/pinctrl/pinctrl-abx500.c b/drivers/pinctrl/pinctrl-abx500.c
index 26abfd8..13ae68f 100644
--- a/drivers/pinctrl/pinctrl-abx500.c
+++ b/drivers/pinctrl/pinctrl-abx500.c
@@ -1116,6 +1116,9 @@  static int __devinit abx500_gpio_probe(struct platform_device *pdev)
 
 	/* Poke in other ASIC variants here */
 	switch (platid->driver_data) {
+	case PINCTRL_AB8500:
+		abx500_pinctrl_ab8500_init(&pct->soc);
+		break;
 	default:
 		dev_err(&pdev->dev, "Unsupported pinctrl sub driver (%d)\n",
 				(int) platid->driver_data);
diff --git a/drivers/pinctrl/pinctrl-abx500.h b/drivers/pinctrl/pinctrl-abx500.h
index 436ace3..a6c9332 100644
--- a/drivers/pinctrl/pinctrl-abx500.h
+++ b/drivers/pinctrl/pinctrl-abx500.h
@@ -177,4 +177,17 @@  struct abx500_pinctrl_soc_data {
 	int irq_gpio_factor;
 };
 
+#ifdef CONFIG_PINCTRL_AB8500
+
+void abx500_pinctrl_ab8500_init(struct abx500_pinctrl_soc_data **soc);
+
+#else
+
+static inline void
+abx500_pinctrl_ab8500_init(struct abx500_pinctrl_soc_data **soc)
+{
+}
+
+#endif
+
 #endif /* PINCTRL_PINCTRL_ABx500_H */