diff mbox

ARM: mxs: dt: Add Crystalfontz CFA-10037 device tree support

Message ID 1358872551-14490-1-git-send-email-maxime.ripard@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Maxime Ripard Jan. 22, 2013, 4:35 p.m. UTC
The CFA-10037 is another expansion board for the CFA-10036 module, with
only a USB Host, a Ethernet device and a lot of gpios.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 arch/arm/boot/dts/imx28-cfa10037.dts |   77 ++++++++++++++++++++++++++++++++++
 arch/arm/mach-mxs/mach-mxs.c         |    8 ++++
 2 files changed, 85 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx28-cfa10037.dts

Comments

Shawn Guo Jan. 24, 2013, 6:07 a.m. UTC | #1
On Tue, Jan 22, 2013 at 05:35:51PM +0100, Maxime Ripard wrote:
> The CFA-10037 is another expansion board for the CFA-10036 module, with
> only a USB Host, a Ethernet device and a lot of gpios.
> 
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> ---
>  arch/arm/boot/dts/imx28-cfa10037.dts |   77 ++++++++++++++++++++++++++++++++++

Please add the dtb target into arch/arm/boot/dts/Makfile.

Shawn

>  arch/arm/mach-mxs/mach-mxs.c         |    8 ++++
>  2 files changed, 85 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx28-cfa10037.dts
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts
new file mode 100644
index 0000000..c2ef3a3
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10037.dts
@@ -0,0 +1,77 @@ 
+/*
+ * Copyright 2012 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10049 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+/include/ "imx28-cfa10036.dts"
+
+/ {
+	model = "Crystalfontz CFA-10037 Board";
+	compatible = "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				pinctrl-names = "default", "default";
+				pinctrl-1 = <&hog_pins_cfa10037>;
+
+				hog_pins_cfa10037: hog-10037@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+						0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-reset-gpios = <&gpio2 21 0>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_usb1_vbus: usb1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio0 7 1>;
+		};
+	};
+};
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 4668cf7..622c45a 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -417,6 +417,12 @@  static void __init cfa10049_init(void)
 	mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
 }
 
+static void __init cfa10037_init(void)
+{
+	enable_clk_enet_out();
+	update_fec_mac_prop(OUI_CRYSTALFONTZ);
+}
+
 static void __init apf28_init(void)
 {
 	enable_clk_enet_out();
@@ -437,6 +443,8 @@  static void __init mxs_machine_init(void)
 		m28evk_init();
 	else if (of_machine_is_compatible("bluegiga,apx4devkit"))
 		apx4devkit_init();
+	else if (of_machine_is_compatible("crystalfontz,cfa10037"))
+		cfa10037_init();
 	else if (of_machine_is_compatible("crystalfontz,cfa10049"))
 		cfa10049_init();
 	else if (of_machine_is_compatible("armadeus,imx28-apf28"))