@@ -3,9 +3,11 @@ Altera SOCFPGA System Manager
Required properties:
- compatible : "altr,sys-mgr"
- reg : Should contain 1 register ranges(address and length)
+- cpu1-start-addr : CPU1 start address in hex.
Example:
sysmgr@ffd08000 {
compatible = "altr,sys-mgr";
reg = <0xffd08000 0x1000>;
+ cpu1-start-addr = <0xffd080c4>;
};
@@ -56,5 +56,9 @@
serial1@ffc03000 {
clock-frequency = <100000000>;
};
+
+ sysmgr@ffd08000 {
+ cpu1-start-addr = <0xffd080c4>;
+ };
};
};
@@ -56,5 +56,9 @@
serial1@ffc03000 {
clock-frequency = <7372800>;
};
+
+ sysmgr@ffd08000 {
+ cpu1-start-addr = <0xffd08010>;
+ };
};
};
@@ -20,7 +20,7 @@
#ifndef __MACH_CORE_H
#define __MACH_CORE_H
-extern void secondary_startup(void);
+extern void v7_secondary_startup(void);
extern void __iomem *socfpga_scu_base_addr;
extern void socfpga_init_clocks(void);
@@ -29,6 +29,8 @@ extern void socfpga_sysmgr_init(void);
extern struct smp_operations socfpga_smp_ops;
extern char secondary_trampoline, secondary_trampoline_end;
+extern unsigned long cpu1start_addr;
+
#define SOCFPGA_SCU_VIRT_BASE 0xfffec000
#endif
@@ -13,13 +13,21 @@
__CPUINIT
.arch armv7-a
-#define CPU1_START_ADDR 0xffd08010
-
ENTRY(secondary_trampoline)
- movw r0, #:lower16:CPU1_START_ADDR
- movt r0, #:upper16:CPU1_START_ADDR
+ movw r2, #:lower16:cpu1start_addr
+ movt r2, #:upper16:cpu1start_addr
+
+ /* The socfpga VT cannot handle a 0xC0000000 page offset when loading
+ the cpu1start_addr, we bit clear it. Tested on HW and VT. */
+ bic r2, r2, #0x40000000
+ ldr r0, [r2]
ldr r1, [r0]
bx r1
ENTRY(secondary_trampoline_end)
+
+ENTRY(v7_secondary_startup)
+ bl v7_invalidate_l1
+ b secondary_startup
+ENDPROC(v7_secondary_startup)
@@ -49,7 +49,8 @@ static int __cpuinit socfpga_boot_secondary(unsigned int cpu, struct task_struct
memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
- __raw_writel(virt_to_phys(secondary_startup), (sys_manager_base_addr+0x10));
+ __raw_writel(virt_to_phys(v7_secondary_startup),
+ (sys_manager_base_addr + (cpu1start_addr & 0x000000ff)));
flush_cache_all();
smp_wmb();
@@ -29,6 +29,7 @@
void __iomem *socfpga_scu_base_addr = ((void __iomem *)(SOCFPGA_SCU_VIRT_BASE));
void __iomem *sys_manager_base_addr;
void __iomem *rst_manager_base_addr;
+unsigned long cpu1start_addr;
static struct map_desc scu_io_desc __initdata = {
.virtual = SOCFPGA_SCU_VIRT_BASE,
@@ -72,6 +73,11 @@ void __init socfpga_sysmgr_init(void)
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "altr,sys-mgr");
+
+ if (of_property_read_u32(np, "cpu1-start-addr",
+ (u32 *) &cpu1start_addr))
+ pr_err("SMP: Need cpu1-start-addr in device tree.\n");
+
sys_manager_base_addr = of_iomap(np, 0);
np = of_find_compatible_node(NULL, NULL, "altr,rst-mgr");