diff mbox

ARM: S3C64XX: Slow down mic detection rate for wm5102

Message ID 1361534564-2082-1-git-send-email-ckeepax@opensource.wolfsonmicro.com (mailing list archive)
State New, archived
Headers show

Commit Message

Charles Keepax Feb. 22, 2013, 12:02 p.m. UTC
A slightly slower rate provides more reliable jack detection during
slower insertions.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
---

This patch does depend on a patch which will be coming through
the extcon tree but this should get merged during this merge
window.

switch: arizona: Support microphone detection rate configuration
commit 2e033db5ddf299de2ae568919d78b0258a5a6423

Thanks,
Charles

 arch/arm/mach-s3c64xx/mach-crag6410-module.c |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

Comments

Mark Brown Feb. 22, 2013, 12:10 p.m. UTC | #1
On Fri, Feb 22, 2013 at 12:02:44PM +0000, Charles Keepax wrote:

> switch: arizona: Support microphone detection rate configuration
> commit 2e033db5ddf299de2ae568919d78b0258a5a6423

The commit ID is correct there, the commit log is (as you'd expect)
extcon:

Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Kim Kukjin March 11, 2013, 1:31 a.m. UTC | #2
Mark Brown wrote:
> 
> On Fri, Feb 22, 2013 at 12:02:44PM +0000, Charles Keepax wrote:
> 
> > switch: arizona: Support microphone detection rate configuration
> > commit 2e033db5ddf299de2ae568919d78b0258a5a6423
> 
> The commit ID is correct there, the commit log is (as you'd expect)
> extcon:
> 
> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

Applied, thanks.

- Kukjin
diff mbox

Patch

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 755c0bb..4f5ace2 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -210,6 +210,7 @@  static struct arizona_pdata wm5102_reva_pdata = {
 	.gpio_base = CODEC_GPIO_BASE,
 	.irq_active_high = true,
 	.micd_pol_gpio = CODEC_GPIO_BASE + 4,
+	.micd_rate = 6,
 	.gpio_defaults = {
 		[2] = 0x10000, /* AIF3TXLRCLK */
 		[3] = 0x4,     /* OPCLK */