@@ -5,13 +5,13 @@ config ARCH_HIGHBANK
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_AMBA
select ARM_GIC
+ select ARM_PSCI
select ARM_TIMER_SP804
select CACHE_L2X0
select CLKDEV_LOOKUP
select COMMON_CLK
select CPU_V7
select GENERIC_CLOCKEVENTS
- select HAVE_ARM_SCU
select HAVE_SMP
select MAILBOX
select PL320_MBOX
@@ -1,4 +1,4 @@
-obj-y := highbank.o system.o smc.o
+obj-y := highbank.o smc.o
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec)
@@ -1,9 +1,6 @@
#ifndef __HIGHBANK_CORE_H
#define __HIGHBANK_CORE_H
-extern void highbank_set_cpu_jump(int cpu, void *jump_addr);
-extern void highbank_restart(char, const char *);
-extern void __iomem *scu_base_addr;
#ifdef CONFIG_PM_SLEEP
extern void highbank_pm_init(void);
@@ -26,9 +26,6 @@
#include <linux/clk-provider.h>
#include <asm/arch_timer.h>
-#include <asm/cacheflush.h>
-#include <asm/cputype.h>
-#include <asm/smp_plat.h>
#include <asm/smp_twd.h>
#include <asm/hardware/arm_timer.h>
#include <asm/hardware/timer-sp.h>
@@ -40,50 +37,15 @@
#include "sysregs.h"
void __iomem *sregs_base;
-void __iomem *scu_base_addr;
-
-static void __init highbank_scu_map_io(void)
-{
- unsigned long base;
-
- /* Get SCU base */
- asm("mrc p15, 4, %0, c15, c0, 0" : "=r" (base));
-
- scu_base_addr = ioremap(base, SZ_4K);
-}
-
-#define HB_JUMP_TABLE_PHYS(cpu) (0x40 + (0x10 * (cpu)))
-#define HB_JUMP_TABLE_VIRT(cpu) phys_to_virt(HB_JUMP_TABLE_PHYS(cpu))
-
-void highbank_set_cpu_jump(int cpu, void *jump_addr)
-{
- cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 0);
- writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu));
- __cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
- outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
- HB_JUMP_TABLE_PHYS(cpu) + 15);
-}
-
-#ifdef CONFIG_CACHE_L2X0
-static void highbank_l2x0_disable(void)
-{
- /* Disable PL310 L2 Cache controller */
- highbank_smc1(0x102, 0x0);
-}
-#endif
static void __init highbank_init_irq(void)
{
irqchip_init();
- if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9"))
- highbank_scu_map_io();
-
#ifdef CONFIG_CACHE_L2X0
/* Enable PL310 L2 Cache controller */
highbank_smc1(0x102, 0x1);
l2x0_of_init(0, ~0UL);
- outer_cache.disable = highbank_l2x0_disable;
#endif
}
@@ -123,10 +85,15 @@ static void __init highbank_timer_init(void)
static void highbank_power_off(void)
{
- highbank_set_pwr_shutdown();
+ highbank_cpu_off(HB_PWR_SHUTDOWN, 1);
+}
- while (1)
- cpu_do_idle();
+static void highbank_restart(char mode, const char *cmd)
+{
+ if (mode == 'h')
+ highbank_cpu_off(HB_PWR_HARD_RESET, 1);
+ else
+ highbank_cpu_off(HB_PWR_SOFT_RESET, 1);
}
static int highbank_platform_notifier(struct notifier_block *nb,
@@ -15,25 +15,15 @@
*/
#include <linux/kernel.h>
-#include <asm/cacheflush.h>
-
-#include "core.h"
#include "sysregs.h"
-extern void secondary_startup(void);
-
/*
* platform-specific code to shutdown a CPU
*
*/
void __ref highbank_cpu_die(unsigned int cpu)
{
- flush_cache_all();
-
- highbank_set_cpu_jump(cpu, phys_to_virt(0));
- highbank_set_core_pwr();
-
- cpu_do_idle();
+ highbank_cpu_off(0, 0);
/* We should never return from idle */
panic("highbank: cpu %d unexpectedly exit from shutdown\n", cpu);
@@ -16,10 +16,10 @@
*/
#include <linux/init.h>
#include <linux/smp.h>
-#include <linux/io.h>
#include <linux/irqchip/arm-gic.h>
-
-#include <asm/smp_scu.h>
+#include <asm/smp_plat.h>
+#include <asm/psci.h>
+#include <asm/page.h>
#include "core.h"
@@ -32,41 +32,13 @@ static void __cpuinit highbank_secondary_init(unsigned int cpu)
static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- highbank_set_cpu_jump(cpu, secondary_startup);
- arch_send_wakeup_ipi_mask(cpumask_of(cpu));
- return 0;
-}
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-static void __init highbank_smp_init_cpus(void)
-{
- unsigned int i, ncores = 4;
-
- /* sanity check */
- if (ncores > NR_CPUS) {
- printk(KERN_WARNING
- "highbank: no. of cores (%d) greater than configured "
- "maximum of %d - clipping\n",
- ncores, NR_CPUS);
- ncores = NR_CPUS;
- }
-
- for (i = 0; i < ncores; i++)
- set_cpu_possible(i, true);
-}
-
-static void __init highbank_smp_prepare_cpus(unsigned int max_cpus)
-{
- if (scu_base_addr)
- scu_enable(scu_base_addr);
+ if (psci_ops.cpu_on)
+ return psci_ops.cpu_on(cpu_logical_map(cpu),
+ __pa(secondary_startup));
+ return -ENODEV;
}
struct smp_operations highbank_smp_ops __initdata = {
- .smp_init_cpus = highbank_smp_init_cpus,
- .smp_prepare_cpus = highbank_smp_prepare_cpus,
.smp_secondary_init = highbank_secondary_init,
.smp_boot_secondary = highbank_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
@@ -16,27 +16,21 @@
#include <linux/cpu_pm.h>
#include <linux/init.h>
-#include <linux/io.h>
#include <linux/suspend.h>
-#include <asm/cacheflush.h>
-#include <asm/proc-fns.h>
#include <asm/suspend.h>
-#include "core.h"
#include "sysregs.h"
static int highbank_suspend_finish(unsigned long val)
{
- outer_flush_all();
- outer_disable();
+ const struct psci_power_state ps = {
+ .id = HB_PWR_SUSPEND,
+ .type = PSCI_POWER_STATE_TYPE_POWER_DOWN,
+ .affinity_level = 1,
+ };
- highbank_set_pwr_suspend();
-
- cpu_do_idle();
-
- highbank_clear_pwr_request();
- return 0;
+ return psci_ops.cpu_suspend(ps, __pa(cpu_resume));
}
static int highbank_pm_enter(suspend_state_t state)
@@ -44,15 +38,11 @@ static int highbank_pm_enter(suspend_state_t state)
cpu_pm_enter();
cpu_cluster_pm_enter();
- highbank_set_cpu_jump(0, cpu_resume);
cpu_suspend(0, highbank_suspend_finish);
cpu_cluster_pm_exit();
cpu_pm_exit();
- highbank_smc1(0x102, 0x1);
- if (scu_base_addr)
- scu_enable(scu_base_addr);
return 0;
}
@@ -63,5 +53,8 @@ static const struct platform_suspend_ops highbank_pm_ops = {
void __init highbank_pm_init(void)
{
+ if (!psci_ops.cpu_suspend)
+ return;
+
suspend_set_ops(&highbank_pm_ops);
}
@@ -16,71 +16,26 @@
#ifndef _MACH_HIGHBANK__SYSREGS_H_
#define _MACH_HIGHBANK__SYSREGS_H_
-#include <linux/io.h>
-#include <linux/smp.h>
-#include <asm/smp_plat.h>
-#include <asm/smp_scu.h>
-#include "core.h"
-
-extern void __iomem *sregs_base;
-
-#define HB_SREG_A9_PWR_REQ 0xf00
-#define HB_SREG_A9_BOOT_STAT 0xf04
-#define HB_SREG_A9_BOOT_DATA 0xf08
+#include <linux/err.h>
+#include <asm/psci.h>
#define HB_PWR_SUSPEND 0
#define HB_PWR_SOFT_RESET 1
#define HB_PWR_HARD_RESET 2
#define HB_PWR_SHUTDOWN 3
-#define SREG_CPU_PWR_CTRL(c) (0x200 + ((c) * 4))
-
-static inline void highbank_set_core_pwr(void)
-{
- int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0);
- if (scu_base_addr)
- scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
- else
- writel_relaxed(1, sregs_base + SREG_CPU_PWR_CTRL(cpu));
-}
-
-static inline void highbank_clear_core_pwr(void)
+static inline int highbank_cpu_off(int id, int affinity_level)
{
- int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0);
- if (scu_base_addr)
- scu_power_mode(scu_base_addr, SCU_PM_NORMAL);
- else
- writel_relaxed(0, sregs_base + SREG_CPU_PWR_CTRL(cpu));
-}
+ struct psci_power_state ps = {
+ .id = id,
+ .type = PSCI_POWER_STATE_TYPE_POWER_DOWN,
+ .affinity_level = affinity_level,
+ };
-static inline void highbank_set_pwr_suspend(void)
-{
- writel(HB_PWR_SUSPEND, sregs_base + HB_SREG_A9_PWR_REQ);
- highbank_set_core_pwr();
-}
+ if (psci_ops.cpu_off)
+ return psci_ops.cpu_off(ps);
-static inline void highbank_set_pwr_shutdown(void)
-{
- writel(HB_PWR_SHUTDOWN, sregs_base + HB_SREG_A9_PWR_REQ);
- highbank_set_core_pwr();
-}
-
-static inline void highbank_set_pwr_soft_reset(void)
-{
- writel(HB_PWR_SOFT_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
- highbank_set_core_pwr();
-}
-
-static inline void highbank_set_pwr_hard_reset(void)
-{
- writel(HB_PWR_HARD_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
- highbank_set_core_pwr();
-}
-
-static inline void highbank_clear_pwr_request(void)
-{
- writel(~0UL, sregs_base + HB_SREG_A9_PWR_REQ);
- highbank_clear_core_pwr();
+ return -ENODEV;
}
#endif
deleted file mode 100644
@@ -1,32 +0,0 @@
-/*
- * Copyright 2011 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
- */
-#include <linux/io.h>
-#include <asm/proc-fns.h>
-
-#include "core.h"
-#include "sysregs.h"
-
-void highbank_restart(char mode, const char *cmd)
-{
- if (mode == 'h')
- highbank_set_pwr_hard_reset();
- else
- highbank_set_pwr_soft_reset();
-
- while (1)
- cpu_do_idle();
-}
-
@@ -196,4 +196,4 @@ static int __init ipc_init(void)
{
return amba_driver_register(&pl320_driver);
}
-module_init(ipc_init);
+arch_initcall(ipc_init);