diff mbox

[v10,3/8] usb: chipidea: add otg id switch and vbus connect/disconnect detect

Message ID 1361946799-29471-4-git-send-email-peter.chen@freescale.com (mailing list archive)
State New, archived
Headers show

Commit Message

Peter Chen Feb. 27, 2013, 6:33 a.m. UTC
The main design flow is the same with msm otg driver, that is the id and
vbus interrupt are handled at core driver, others are handled by
individual drivers.

- At former design, when switch usb role from device->host, it will call
udc_stop, it will remove the gadget driver, so when switch role
from host->device, it can't add gadget driver any more.
At new design, when role switch occurs, the gadget just calls
usb_gadget_vbus_disconnect/usb_gadget_vbus_connect as well as
reset controller, it will not free any device/gadget structure

- Add vbus connect and disconnect to core interrupt handler, it can
notify udc driver by calling usb_gadget_vbus_disconnect
/usb_gadget_vbus_connect.

- vbus interrupt needs to be handled when gadget function is enabled

- Create/destroy the gadget at udc's init and destory function

- start/stop API are used at otg id switch and probe routine

- Defer some gadget operations at ci's delayed work queue

Signed-off-by: Peter Chen <peter.chen@freescale.com>
---
 drivers/usb/chipidea/bits.h        |   10 ++
 drivers/usb/chipidea/ci.h          |    9 ++-
 drivers/usb/chipidea/ci13xxx_imx.c |    3 +-
 drivers/usb/chipidea/core.c        |  190 ++++++++++++++++++++++++++++++++----
 drivers/usb/chipidea/host.c        |    6 +
 drivers/usb/chipidea/host.h        |    6 +-
 drivers/usb/chipidea/otg.c         |   28 ++++--
 drivers/usb/chipidea/otg.h         |    3 +
 drivers/usb/chipidea/udc.c         |   39 ++++++--
 drivers/usb/chipidea/udc.h         |    4 +
 10 files changed, 256 insertions(+), 42 deletions(-)
diff mbox

Patch

diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h
index d8ffc2f..58ef56c 100644
--- a/drivers/usb/chipidea/bits.h
+++ b/drivers/usb/chipidea/bits.h
@@ -77,11 +77,21 @@ 
 #define OTGSC_ASVIS	      BIT(18)
 #define OTGSC_BSVIS	      BIT(19)
 #define OTGSC_BSEIS	      BIT(20)
+#define OTGSC_1MSIS	      BIT(21)
+#define OTGSC_DPIS	      BIT(22)
 #define OTGSC_IDIE	      BIT(24)
 #define OTGSC_AVVIE	      BIT(25)
 #define OTGSC_ASVIE	      BIT(26)
 #define OTGSC_BSVIE	      BIT(27)
 #define OTGSC_BSEIE	      BIT(28)
+#define OTGSC_1MSIE	      BIT(29)
+#define OTGSC_DPIE	      BIT(30)
+#define OTGSC_INT_EN_BITS	(OTGSC_IDIE | OTGSC_AVVIE | OTGSC_ASVIE \
+				| OTGSC_BSVIE | OTGSC_BSEIE | OTGSC_1MSIE \
+				| OTGSC_DPIE)
+#define OTGSC_INT_STATUS_BITS	(OTGSC_IDIS | OTGSC_AVVIS | OTGSC_ASVIS	\
+				| OTGSC_BSVIS | OTGSC_BSEIS | OTGSC_1MSIS \
+				| OTGSC_DPIS)
 
 /* USBMODE */
 #define USBMODE_CM            (0x03UL <<  0)
diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
index 697e369..0bd17a5 100644
--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -130,6 +130,9 @@  struct hw_bank {
  * @transceiver: pointer to USB PHY, if any
  * @hcd: pointer to usb_hcd for ehci host driver
  * @otg: for otg support
+ * @id_event: indicates there is a id event, and handled at ci_otg_work
+ * @b_sess_valid_event: indicates there is a vbus event, and handled
+ * at ci_otg_work
  */
 struct ci13xxx {
 	struct device			*dev;
@@ -140,6 +143,7 @@  struct ci13xxx {
 	enum ci_role			role;
 	bool				is_otg;
 	struct work_struct		work;
+	struct delayed_work		dwork;
 	struct workqueue_struct		*wq;
 
 	struct dma_pool			*qh_pool;
@@ -166,6 +170,8 @@  struct ci13xxx {
 	struct usb_phy			*transceiver;
 	struct usb_hcd			*hcd;
 	struct usb_otg      		otg;
+	bool				id_event;
+	bool				b_sess_valid_event;
 };
 
 static inline struct ci_role_driver *ci_role(struct ci13xxx *ci)
@@ -201,7 +207,6 @@  static inline void ci_role_stop(struct ci13xxx *ci)
 
 	ci->roles[role]->stop(ci);
 }
-
 /******************************************************************************
  * REGISTERS
  *****************************************************************************/
@@ -314,4 +319,6 @@  int hw_port_test_set(struct ci13xxx *ci, u8 mode);
 
 u8 hw_port_test_get(struct ci13xxx *ci);
 
+void ci_handle_vbus_change(struct ci13xxx *ci);
+
 #endif	/* __DRIVERS_USB_CHIPIDEA_CI_H */
diff --git a/drivers/usb/chipidea/ci13xxx_imx.c b/drivers/usb/chipidea/ci13xxx_imx.c
index 136869b..793fdba 100644
--- a/drivers/usb/chipidea/ci13xxx_imx.c
+++ b/drivers/usb/chipidea/ci13xxx_imx.c
@@ -110,7 +110,8 @@  static int ci13xxx_imx_probe(struct platform_device *pdev)
 	pdata->capoffset = DEF_CAPOFFSET;
 	pdata->flags = CI13XXX_REQUIRE_TRANSCEIVER |
 		       CI13XXX_PULLUP_ON_VBUS |
-		       CI13XXX_DISABLE_STREAMING;
+		       CI13XXX_DISABLE_STREAMING | 
+		       CI13XXX_REGS_SHARED;
 
 	pdata->phy_mode = of_usb_get_phy_mode(pdev->dev.of_node);
 	pdata->dr_mode = of_usb_get_dr_mode(pdev->dev.of_node);
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index c89f2aa..6cc6069 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -75,6 +75,7 @@ 
 #include "bits.h"
 #include "host.h"
 #include "debug.h"
+#include "otg.h"
 
 /* Controller register map */
 static uintptr_t ci_regs_nolpm[] = {
@@ -201,6 +202,14 @@  static int hw_device_init(struct ci13xxx *ci, void __iomem *base)
 	if (ci->hw_ep_max > ENDPT_MAX)
 		return -ENODEV;
 
+	/* Disable all interrupts bits */
+	hw_write(ci, OP_USBINTR, 0xffffffff, 0);
+	ci_disable_otg_interrupt(ci, OTGSC_INT_EN_BITS);
+
+	/* Clear all interrupts status bits*/
+	hw_write(ci, OP_USBSTS, 0xffffffff, 0xffffffff);
+	ci_clear_otg_interrupt(ci, OTGSC_INT_STATUS_BITS);
+
 	dev_dbg(ci->dev, "ChipIdea HDRC found, lpm: %d; cap: %p op: %p\n",
 		ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op);
 
@@ -302,24 +311,131 @@  static enum ci_role ci_otg_role(struct ci13xxx *ci)
 }
 
 /**
- * ci_role_work - perform role changing based on ID pin
- * @work: work struct
+ * hw_wait_reg: wait the register value
+ *
+ * Sometimes, it needs to wait register value before going on.
+ * Eg, when switch to device mode, the vbus value should be lower
+ * than OTGSC_BSV before connects to host.
+ *
+ * @ci: the controller
+ * @reg: register index
+ * @mask: mast bit
+ * @value: the bit value to wait
+ * @timeout: timeout to indicate an error
+ *
+ * This function returns an error code if timeout
  */
-static void ci_role_work(struct work_struct *work)
+static int hw_wait_reg(struct ci13xxx *ci, enum ci13xxx_regs reg, u32 mask,
+				u32 value, unsigned long timeout)
+{
+	unsigned long elapse = jiffies + timeout;
+
+	while (hw_read(ci, reg, mask) != value) {
+		if (time_after(jiffies, elapse)) {
+			dev_err(ci->dev, "timeout waiting for %08x in %d\n",
+					mask, reg);
+			return -ETIMEDOUT;
+		}
+		msleep(20);
+	}
+
+	return 0;
+}
+
+/* 
+ * Since there are some capacitances at vbus, the vbus may not
+ * change very quickly when we stop/start internal 5v.
+ * Below is a vbus stable timeout value, the routine will quit
+ * if the vbus gets the required value, we can think there are some
+ * problems for hardware if the vbus can't get the required value
+ * within 5 seconds.
+ */
+#define CI_VBUS_STABLE_TIMEOUT 500
+static void ci_handle_id_switch(struct ci13xxx *ci)
 {
-	struct ci13xxx *ci = container_of(work, struct ci13xxx, work);
 	enum ci_role role = ci_otg_role(ci);
 
 	if (role != ci->role) {
 		dev_dbg(ci->dev, "switching from %s to %s\n",
 			ci_role(ci)->name, ci->roles[role]->name);
 
+		/* 1. Finish the current role */
 		ci_role_stop(ci);
+		hw_device_reset(ci, USBMODE_CM_IDLE);
+
+		/* 2. Turn on/off vbus according to coming role */
+		if (role == CI_ROLE_GADGET) {
+			otg_set_vbus(&ci->otg, false);
+			/* wait vbus lower than OTGSC_BSV */
+			hw_wait_reg(ci, OP_OTGSC, OTGSC_BSV, 0,
+					CI_VBUS_STABLE_TIMEOUT);
+		} else if (role == CI_ROLE_HOST) {
+			otg_set_vbus(&ci->otg, true);
+			/* wait vbus higher than OTGSC_AVV */
+			hw_wait_reg(ci, OP_OTGSC, OTGSC_AVV, OTGSC_AVV,
+					CI_VBUS_STABLE_TIMEOUT);
+		}
+
+		/* 3. Begin the new role */
 		ci_role_start(ci, role);
-		enable_irq(ci->irq);
 	}
 }
 
+void ci_handle_vbus_change(struct ci13xxx *ci)
+{
+	u32 otgsc = hw_read(ci, OP_OTGSC, ~0);
+
+	if (otgsc & OTGSC_BSV)
+		usb_gadget_vbus_connect(&ci->gadget);
+	else
+		usb_gadget_vbus_disconnect(&ci->gadget);
+}
+
+/**
+ * ci_otg_work - perform otg (vbus/id) event handle
+ * @work: work struct
+ */
+static void ci_otg_work(struct work_struct *work)
+{
+	struct ci13xxx *ci = container_of(work, struct ci13xxx, work);
+
+	if (ci->id_event) {
+		ci->id_event = false;
+		ci_handle_id_switch(ci);
+	} else if (ci->b_sess_valid_event) {
+		ci->b_sess_valid_event = false;
+		ci_handle_vbus_change(ci);
+	} else
+		dev_err(ci->dev, "unexpected event occurs at %s\n", __func__);
+
+	enable_irq(ci->irq);
+}
+
+static void ci_delayed_work(struct work_struct *work)
+{
+	struct delayed_work *dwork = to_delayed_work(work);
+	struct ci13xxx *ci = container_of(dwork, struct ci13xxx, dwork);
+
+	if (ci->role == CI_ROLE_GADGET) {
+		/*
+		 * if it is device mode:
+		 * - Enable vbus detect
+		 * - If it has already connected to host, notify udc
+		 */
+		ci_enable_otg_interrupt(ci, OTGSC_BSVIE);
+		ci_handle_vbus_change(ci);
+	} else if (ci->is_otg && (ci->role == CI_ROLE_HOST)) {
+		/* USB Device at the MicroB to A cable */
+		otg_set_vbus(&ci->otg, true);
+	}
+}
+
+static inline void ci_role_destroy(struct ci13xxx *ci)
+{
+	ci_hdrc_gadget_destroy(ci);
+	ci_hdrc_host_destroy(ci);
+}
+
 static ssize_t show_role(struct device *dev, struct device_attribute *attr,
 			 char *buf)
 {
@@ -352,25 +468,50 @@  static ssize_t store_role(struct device *dev, struct device_attribute *attr,
 
 static DEVICE_ATTR(role, S_IRUSR | S_IWUSR, show_role, store_role);
 
+static bool ci_is_otg_capable(struct ci13xxx *ci)
+{
+	return hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC | DCCPARAMS_HC)
+	       	== (DCCPARAMS_DC | DCCPARAMS_HC);
+}
+
 static irqreturn_t ci_irq(int irq, void *data)
 {
 	struct ci13xxx *ci = data;
 	irqreturn_t ret = IRQ_NONE;
 	u32 otgsc = 0;
 
-	if (ci->is_otg)
+	if (ci_is_otg_capable(ci))
 		otgsc = hw_read(ci, OP_OTGSC, ~0);
 
-	if (ci->role != CI_ROLE_END)
-		ret = ci_role(ci)->irq(ci);
+	/*
+	 * Handle id change interrupt, it indicates device/host function
+	 * switch.
+	 */
+	if (ci->is_otg && (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) {
+		ci->id_event = true;
+		ci_clear_otg_interrupt(ci, OTGSC_IDIS);
+		disable_irq_nosync(ci->irq);
+		queue_work(ci->wq, &ci->work);
+		return IRQ_HANDLED;
+	}
 
-	if (ci->is_otg && (otgsc & OTGSC_IDIS)) {
-		hw_write(ci, OP_OTGSC, OTGSC_IDIS, OTGSC_IDIS);
+	/*
+	 * Handle vbus change interrupt, it indicates device connection
+	 * and disconnection events.
+	 */
+	if (ci_is_otg_capable(ci) && (otgsc & OTGSC_BSVIE)
+			&& (otgsc & OTGSC_BSVIS)) {
+		ci->b_sess_valid_event = true;
+		ci_clear_otg_interrupt(ci, OTGSC_BSVIS);
 		disable_irq_nosync(ci->irq);
 		queue_work(ci->wq, &ci->work);
-		ret = IRQ_HANDLED;
+		return IRQ_HANDLED;
 	}
 
+	/* Handle device/host interrupt */
+	if (ci->role != CI_ROLE_END)
+		ret = ci_role(ci)->irq(ci);
+
 	return ret;
 }
 
@@ -481,7 +622,8 @@  static int ci_hdrc_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	INIT_WORK(&ci->work, ci_role_work);
+	INIT_WORK(&ci->work, ci_otg_work);
+	INIT_DELAYED_WORK(&ci->dwork, ci_delayed_work);
 	ci->wq = create_singlethread_workqueue("ci_otg");
 	if (!ci->wq) {
 		dev_err(dev, "can't create workqueue\n");
@@ -512,7 +654,10 @@  static int ci_hdrc_probe(struct platform_device *pdev)
 	}
 
 	if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) {
+		dev_dbg(dev, "support otg\n");
 		ci->is_otg = true;
+		/* if otg is supported, create struct usb_otg */
+		ci_hdrc_otg_init(ci);
 		/* ID pin needs 1ms debouce time, we delay 2ms for safe */
 		mdelay(2);
 		ci->role = ci_otg_role(ci);
@@ -528,7 +673,7 @@  static int ci_hdrc_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(dev, "can't start %s role\n", ci_role(ci)->name);
 		ret = -ENODEV;
-		goto rm_wq;
+		goto free_memory;
 	}
 
 	platform_set_drvdata(pdev, ci);
@@ -539,17 +684,22 @@  static int ci_hdrc_probe(struct platform_device *pdev)
 
 	ret = device_create_file(dev, &dev_attr_role);
 	if (ret)
-		goto rm_attr;
+		goto free_irq;
 
-	if (ci->is_otg)
-		hw_write(ci, OP_OTGSC, OTGSC_IDIE, OTGSC_IDIE);
+	/* Defer some operations */
+	queue_delayed_work(ci->wq, &ci->dwork, msecs_to_jiffies(200));
 
 	return ret;
 
-rm_attr:
-	device_remove_file(dev, &dev_attr_role);
+free_irq:
+	free_irq(ci->irq, ci);
 stop:
-	ci_role_stop(ci);
+	ci_role_destroy(ci);
+free_memory:
+	if (ci->roles[CI_ROLE_HOST])
+		devm_kfree(dev, ci->roles[CI_ROLE_HOST]);
+	if (ci->roles[CI_ROLE_GADGET])
+		devm_kfree(dev, ci->roles[CI_ROLE_GADGET]);
 rm_wq:
 	flush_workqueue(ci->wq);
 	destroy_workqueue(ci->wq);
@@ -565,7 +715,7 @@  static int ci_hdrc_remove(struct platform_device *pdev)
 	destroy_workqueue(ci->wq);
 	device_remove_file(ci->dev, &dev_attr_role);
 	free_irq(ci->irq, ci);
-	ci_role_stop(ci);
+	ci_role_destroy(ci);
 
 	return 0;
 }
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 8e9d312..ead3158 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -105,3 +105,9 @@  int ci_hdrc_host_init(struct ci13xxx *ci)
 
 	return 0;
 }
+
+void ci_hdrc_host_destroy(struct ci13xxx *ci)
+{
+	if (ci->role == CI_ROLE_HOST)
+		host_stop(ci);
+}
diff --git a/drivers/usb/chipidea/host.h b/drivers/usb/chipidea/host.h
index 761fb1f..19cc72d 100644
--- a/drivers/usb/chipidea/host.h
+++ b/drivers/usb/chipidea/host.h
@@ -4,13 +4,17 @@ 
 #ifdef CONFIG_USB_CHIPIDEA_HOST
 
 int ci_hdrc_host_init(struct ci13xxx *ci);
-
+void ci_hdrc_host_destroy(struct ci13xxx *ci);
 #else
 
 static inline int ci_hdrc_host_init(struct ci13xxx *ci)
 {
 	return -ENXIO;
 }
+static inline void ci_hdrc_host_destroy(struct ci13xxx *ci)
+{
+
+}
 
 #endif
 
diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
index 7dea3b3..2986d91 100644
--- a/drivers/usb/chipidea/otg.c
+++ b/drivers/usb/chipidea/otg.c
@@ -10,21 +10,28 @@ 
  * published by the Free Software Foundation.
  */
 
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/usb/gadget.h>
 #include <linux/usb/otg.h>
+#include <linux/usb/gadget.h>
 #include <linux/usb/chipidea.h>
 
 #include "ci.h"
-#include "udc.h"
 #include "bits.h"
-#include "host.h"
-#include "debug.h"
+
+void ci_clear_otg_interrupt(struct ci13xxx *ci, u32 bits)
+{
+	/* Only clear request bits */
+	hw_write(ci, OP_OTGSC, OTGSC_INT_STATUS_BITS, bits);
+}
+
+void ci_enable_otg_interrupt(struct ci13xxx *ci, u32 bits)
+{
+	hw_write(ci, OP_OTGSC, bits, bits);
+}
+
+void ci_disable_otg_interrupt(struct ci13xxx *ci, u32 bits)
+{
+	hw_write(ci, OP_OTGSC, bits, 0);
+}
 
 static int ci_otg_set_peripheral(struct usb_otg *otg,
 		struct usb_gadget *periph)
@@ -55,6 +62,7 @@  int ci_hdrc_otg_init(struct ci13xxx *ci)
 	ci->otg.set_host = ci_otg_set_host;
 	if (!IS_ERR_OR_NULL(ci->transceiver))
 		ci->transceiver->otg = &ci->otg;
+	ci_enable_otg_interrupt(ci, OTGSC_IDIE);
 
 	return 0;
 }
diff --git a/drivers/usb/chipidea/otg.h b/drivers/usb/chipidea/otg.h
index b4c6b3e..fa30428 100644
--- a/drivers/usb/chipidea/otg.h
+++ b/drivers/usb/chipidea/otg.h
@@ -2,5 +2,8 @@ 
 #define __DRIVERS_USB_CHIPIDEA_OTG_H
 
 int ci_hdrc_otg_init(struct ci13xxx *ci);
+void ci_clear_otg_interrupt(struct ci13xxx *ci, u32 bits);
+void ci_enable_otg_interrupt(struct ci13xxx *ci, u32 bits);
+void ci_disable_otg_interrupt(struct ci13xxx *ci, u32 bits);
 
 #endif /* __DRIVERS_USB_CHIPIDEA_OTG_H */
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index d214448..e82dae4 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -31,6 +31,7 @@ 
 
 #include "ci.h"
 #include "udc.h"
+#include "otg.h"
 #include "bits.h"
 #include "debug.h"
 
@@ -1371,6 +1372,7 @@  static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
 			pm_runtime_get_sync(&_gadget->dev);
 			hw_device_reset(ci, USBMODE_CM_DC);
 			hw_device_state(ci, ci->ep0out->qh.dma);
+			dev_dbg(ci->dev, "Connected to host\n");
 		} else {
 			hw_device_state(ci, 0);
 			if (ci->platdata->notify_event)
@@ -1378,6 +1380,7 @@  static int ci13xxx_vbus_session(struct usb_gadget *_gadget, int is_active)
 				CI13XXX_CONTROLLER_STOPPED_EVENT);
 			_gadget_stop_activity(&ci->gadget);
 			pm_runtime_put_sync(&_gadget->dev);
+			dev_dbg(ci->dev, "Disconnected from host\n");
 		}
 	}
 
@@ -1741,7 +1744,12 @@  static int udc_start(struct ci13xxx *ci)
 	if (!IS_ERR_OR_NULL(ci->transceiver)) {
 		retval = otg_set_peripheral(ci->transceiver->otg,
 						&ci->gadget);
-		if (retval)
+		/* 
+		 * If we implement all USB functions using chipidea drivers,
+		 * it doesn't need to call above API, meanwhile, if we only
+		 * use gadget function, calling above API is useless.
+		 */
+		if (retval && retval != -ENOTSUPP)
 			goto remove_dbg;
 	}
 
@@ -1778,12 +1786,27 @@  free_qh_pool:
 	return retval;
 }
 
+static int udc_id_switch_for_device(struct ci13xxx *ci)
+{
+	ci_clear_otg_interrupt(ci, OTGSC_BSVIS);
+	ci_enable_otg_interrupt(ci, OTGSC_BSVIE);
+
+	return 0;
+}
+
+static void udc_id_switch_for_host(struct ci13xxx *ci)
+{
+	/* host doesn't care B_SESSION_VALID event */
+	ci_clear_otg_interrupt(ci, OTGSC_BSVIS);
+	ci_disable_otg_interrupt(ci, OTGSC_BSVIE);
+}
+
 /**
- * udc_remove: parent remove must call this to remove UDC
+ * ci_hdrc_gadget_destroy: parent remove must call this to remove UDC
  *
  * No interrupts active, the IRQ has been released
  */
-static void udc_stop(struct ci13xxx *ci)
+void ci_hdrc_gadget_destroy(struct ci13xxx *ci)
 {
 	if (ci == NULL)
 		return;
@@ -1802,15 +1825,13 @@  static void udc_stop(struct ci13xxx *ci)
 	}
 	dbg_remove_files(&ci->gadget.dev);
 	device_unregister(&ci->gadget.dev);
-	/* my kobject is dynamic, I swear! */
-	memset(&ci->gadget, 0, sizeof(ci->gadget));
 }
 
 /**
  * ci_hdrc_gadget_init - initialize device related bits
  * ci: the controller
  *
- * This function enables the gadget role, if the device is "device capable".
+ * This function initializes gadget, if the device is "device capable".
  */
 int ci_hdrc_gadget_init(struct ci13xxx *ci)
 {
@@ -1823,11 +1844,11 @@  int ci_hdrc_gadget_init(struct ci13xxx *ci)
 	if (!rdrv)
 		return -ENOMEM;
 
-	rdrv->start	= udc_start;
-	rdrv->stop	= udc_stop;
+	rdrv->start	= udc_id_switch_for_device;
+	rdrv->stop	= udc_id_switch_for_host;
 	rdrv->irq	= udc_irq;
 	rdrv->name	= "gadget";
 	ci->roles[CI_ROLE_GADGET] = rdrv;
 
-	return 0;
+	return udc_start(ci);
 }
diff --git a/drivers/usb/chipidea/udc.h b/drivers/usb/chipidea/udc.h
index 4ff2384..6553e4d 100644
--- a/drivers/usb/chipidea/udc.h
+++ b/drivers/usb/chipidea/udc.h
@@ -80,6 +80,7 @@  struct ci13xxx_req {
 #ifdef CONFIG_USB_CHIPIDEA_UDC
 
 int ci_hdrc_gadget_init(struct ci13xxx *ci);
+void ci_hdrc_gadget_destroy(struct ci13xxx *ci);
 
 #else
 
@@ -87,7 +88,10 @@  static inline int ci_hdrc_gadget_init(struct ci13xxx *ci)
 {
 	return -ENXIO;
 }
+static inline void ci_hdrc_gadget_destroy(struct ci13xxx *ci)
+{
 
+}
 #endif
 
 #endif /* __DRIVERS_USB_CHIPIDEA_UDC_H */