diff mbox

DMA: PL330: Add check if device tree compatible

Message ID 1362374943-29312-1-git-send-email-padma.v@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Padmavathi Venna March 4, 2013, 5:29 a.m. UTC
This patch register the dma controller with generic dma helpers only
in DT case. This also adds some extra error handling in the driver.

Signed-off-by: Padmavathi Venna <padma.v@samsung.com>
Reported-by: Sachin Kamat <sachin.kamat@linaro.org>
---

Based on Vinod Koul next branch

 drivers/dma/pl330.c |   41 ++++++++++++++++++++++++++++++-----------
 1 files changed, 30 insertions(+), 11 deletions(-)

Comments

Arnd Bergmann March 4, 2013, 12:58 p.m. UTC | #1
On Monday 04 March 2013, Padmavathi Venna wrote:
> +
> +       if (adev->dev.of_node) {
> +               ret = of_dma_controller_register(adev->dev.of_node,
> +                                        of_dma_pl330_xlate, pdmac);
> +               if (ret) {
> +                       dev_err(&adev->dev,
> +                       "unable to register DMA to the generic DT DMA helpers\n");
> +                       goto probe_err4;
> +               }
>         }

Hmm, when I did the same thing in dw_dma, Andy commented that this should
not be a failure at all, since the device is still usable. Could we
instead make of_dma_controller_register return silently when it
gets a NULL of_node?

	Arnd
padma venkat March 5, 2013, 5:51 a.m. UTC | #2
Hi Arnd,

On Mon, Mar 4, 2013 at 6:28 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Monday 04 March 2013, Padmavathi Venna wrote:
>> +
>> +       if (adev->dev.of_node) {
>> +               ret = of_dma_controller_register(adev->dev.of_node,
>> +                                        of_dma_pl330_xlate, pdmac);
>> +               if (ret) {
>> +                       dev_err(&adev->dev,
>> +                       "unable to register DMA to the generic DT DMA helpers\n");
>> +                       goto probe_err4;
>> +               }
>>         }
>
> Hmm, when I did the same thing in dw_dma, Andy commented that this should
> not be a failure at all, since the device is still usable. Could we
> instead make of_dma_controller_register return silently when it
> gets a NULL of_node?

Ok. I will do that.

Thanks
Padma
>
>         Arnd
diff mbox

Patch

diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 7181531..bdad8de 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -2882,7 +2882,7 @@  pl330_probe(struct amba_device *adev, const struct amba_id *id)
 {
 	struct dma_pl330_platdata *pdat;
 	struct dma_pl330_dmac *pdmac;
-	struct dma_pl330_chan *pch;
+	struct dma_pl330_chan *pch, *_p;
 	struct pl330_info *pi;
 	struct dma_device *pd;
 	struct resource *res;
@@ -2984,7 +2984,17 @@  pl330_probe(struct amba_device *adev, const struct amba_id *id)
 	ret = dma_async_device_register(pd);
 	if (ret) {
 		dev_err(&adev->dev, "unable to register DMAC\n");
-		goto probe_err2;
+		goto probe_err3;
+	}
+
+	if (adev->dev.of_node) {
+		ret = of_dma_controller_register(adev->dev.of_node,
+					 of_dma_pl330_xlate, pdmac);
+		if (ret) {
+			dev_err(&adev->dev,
+			"unable to register DMA to the generic DT DMA helpers\n");
+			goto probe_err4;
+		}
 	}
 
 	dev_info(&adev->dev,
@@ -2995,16 +3005,23 @@  pl330_probe(struct amba_device *adev, const struct amba_id *id)
 		pi->pcfg.data_bus_width / 8, pi->pcfg.num_chan,
 		pi->pcfg.num_peri, pi->pcfg.num_events);
 
-	ret = of_dma_controller_register(adev->dev.of_node,
-					 of_dma_pl330_xlate, pdmac);
-	if (ret) {
-		dev_err(&adev->dev,
-		"unable to register DMA to the generic DT DMA helpers\n");
-		goto probe_err2;
-	}
-
 	return 0;
+probe_err4:
+	dma_async_device_unregister(pd);
+probe_err3:
+	amba_set_drvdata(adev, NULL);
 
+	/* Idle the DMAC */
+	list_for_each_entry_safe(pch, _p, &pdmac->ddma.channels,
+			chan.device_node) {
+
+		/* Remove the channel */
+		list_del(&pch->chan.device_node);
+
+		/* Flush the channel */
+		pl330_control(&pch->chan, DMA_TERMINATE_ALL, 0);
+		pl330_free_chan_resources(&pch->chan);
+	}
 probe_err2:
 	pl330_del(pi);
 probe_err1:
@@ -3023,8 +3040,10 @@  static int pl330_remove(struct amba_device *adev)
 	if (!pdmac)
 		return 0;
 
-	of_dma_controller_free(adev->dev.of_node);
+	if (adev->dev.of_node)
+		of_dma_controller_free(adev->dev.of_node);
 
+	dma_async_device_unregister(&pdmac->ddma);
 	amba_set_drvdata(adev, NULL);
 
 	/* Idle the DMAC */