@@ -577,6 +577,7 @@ config ARCH_KIRKWOOD
select PINCTRL
select PINCTRL_KIRKWOOD
select PLAT_ORION_LEGACY
+ select MVEBU_MBUS
help
Support for the following Marvell Kirkwood series SoCs:
88F6180, 88F6192 and 88F6281.
@@ -17,7 +17,8 @@
};
ocp@f1000000 {
- compatible = "simple-bus";
+ compatible = "marvell,kirkwood-mbus", "simple-bus";
+ reg = <0xf1002000 0x80>, <0xf1001500 0x20>;
ranges = <0x00000000 0xf1000000 0x4000000
0xf5000000 0xf5000000 0x0000400>;
#address-cells = <1>;
@@ -1,4 +1,4 @@
-obj-y += common.o addr-map.o irq.o pcie.o mpp.o
+obj-y += common.o irq.o pcie.o mpp.o
obj-$(CONFIG_MACH_DB88F6281_BP) += db88f6281-bp-setup.o
obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o
deleted file mode 100644
@@ -1,91 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/addr-map.c
- *
- * Address map functions for Marvell Kirkwood SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mbus.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <plat/addr-map.h>
-#include "common.h"
-
-/*
- * Generic Address Decode Windows bit settings
- */
-#define TARGET_DEV_BUS 1
-#define TARGET_SRAM 3
-#define TARGET_PCIE 4
-#define ATTR_DEV_SPI_ROM 0x1e
-#define ATTR_DEV_BOOT 0x1d
-#define ATTR_DEV_NAND 0x2f
-#define ATTR_DEV_CS3 0x37
-#define ATTR_DEV_CS2 0x3b
-#define ATTR_DEV_CS1 0x3d
-#define ATTR_DEV_CS0 0x3e
-#define ATTR_PCIE_IO 0xe0
-#define ATTR_PCIE_MEM 0xe8
-#define ATTR_PCIE1_IO 0xd0
-#define ATTR_PCIE1_MEM 0xd8
-#define ATTR_SRAM 0x01
-
-/*
- * Description of the windows needed by the platform code
- */
-static struct __initdata orion_addr_map_cfg addr_map_cfg = {
- .num_wins = 8,
- .remappable_wins = 4,
- .bridge_virt_base = BRIDGE_VIRT_BASE,
-};
-
-static const struct __initdata orion_addr_map_info addr_map_info[] = {
- /*
- * Windows for PCIe IO+MEM space.
- */
- { 0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE,
- TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE
- },
- { 1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE,
- TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE
- },
- { 2, KIRKWOOD_PCIE1_IO_PHYS_BASE, KIRKWOOD_PCIE1_IO_SIZE,
- TARGET_PCIE, ATTR_PCIE1_IO, KIRKWOOD_PCIE1_IO_BUS_BASE
- },
- { 3, KIRKWOOD_PCIE1_MEM_PHYS_BASE, KIRKWOOD_PCIE1_MEM_SIZE,
- TARGET_PCIE, ATTR_PCIE1_MEM, KIRKWOOD_PCIE1_MEM_BUS_BASE
- },
- /*
- * Window for NAND controller.
- */
- { 4, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
- TARGET_DEV_BUS, ATTR_DEV_NAND, -1
- },
- /*
- * Window for SRAM.
- */
- { 5, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE,
- TARGET_SRAM, ATTR_SRAM, -1
- },
- /* End marker */
- { -1, 0, 0, 0, 0, 0 }
-};
-
-void __init kirkwood_setup_cpu_mbus(void)
-{
- /*
- * Disable, clear and configure windows.
- */
- orion_config_wins(&addr_map_cfg, addr_map_info);
-
- /*
- * Setup MBUS dram target info.
- */
- orion_setup_cpu_mbus_target(&addr_map_cfg,
- (void __iomem *) DDR_WINDOW_CPU_BASE);
-}
@@ -17,12 +17,14 @@
#include <linux/clk-provider.h>
#include <linux/clk/mvebu.h>
#include <linux/kexec.h>
+#include <linux/dma-mapping.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/bridge-regs.h>
#include <linux/platform_data/usb-ehci-orion.h>
#include <plat/irq.h>
#include <plat/common.h>
+#include <plat/time.h>
#include "common.h"
static struct of_device_id kirkwood_dt_match_table[] __initdata = {
@@ -70,6 +72,19 @@ static void __init kirkwood_of_clk_init(void)
kirkwood_legacy_clk_init();
}
+static void __init kirkwood_dt_init_early(void)
+{
+ orion_time_set_base(TIMER_VIRT_BASE);
+
+ /*
+ * Some Kirkwood devices allocate their coherent buffers from atomic
+ * context. Increase size of atomic coherent pool to make sure such
+ * the allocations won't fail.
+ */
+ init_dma_coherent_pool_size(SZ_1M);
+ mvebu_mbus_dt_init();
+}
+
static void __init kirkwood_dt_init(void)
{
pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
@@ -82,7 +97,7 @@ static void __init kirkwood_dt_init(void)
*/
writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
- kirkwood_setup_cpu_mbus();
+ kirkwood_setup_wins();
kirkwood_l2_init();
@@ -175,7 +190,7 @@ static const char * const kirkwood_dt_board_compat[] = {
DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
/* Maintainer: Jason Cooper <jason@lakedaemon.net> */
.map_io = kirkwood_map_io,
- .init_early = kirkwood_init_early,
+ .init_early = kirkwood_dt_init_early,
.init_irq = orion_dt_init_irq,
.init_time = kirkwood_timer_init,
.init_machine = kirkwood_dt_init,
@@ -33,7 +33,6 @@
#include <linux/platform_data/usb-ehci-orion.h>
#include <plat/common.h>
#include <plat/time.h>
-#include <plat/addr-map.h>
#include <linux/platform_data/dma-mv_xor.h>
#include "common.h"
@@ -535,6 +534,9 @@ void __init kirkwood_init_early(void)
* the allocations won't fail.
*/
init_dma_coherent_pool_size(SZ_1M);
+ mvebu_mbus_init("marvell,kirkwood-mbus",
+ BRIDGE_WINS_BASE, BRIDGE_WINS_SZ,
+ DDR_WINDOW_CPU_BASE, DDR_WINDOW_CPU_SZ);
}
int kirkwood_tclk;
@@ -650,6 +652,38 @@ char * __init kirkwood_id(void)
}
}
+void __init kirkwood_setup_wins(void)
+{
+ /*
+ * The PCIe windows will no longer be statically allocated
+ * here once Kirkwood is migrated to the pci-mvebu driver.
+ */
+ mvebu_mbus_add_window_remap_flags("pcie0.0",
+ KIRKWOOD_PCIE_IO_PHYS_BASE,
+ KIRKWOOD_PCIE_IO_SIZE,
+ KIRKWOOD_PCIE_IO_BUS_BASE,
+ MVEBU_MBUS_PCI_IO);
+ mvebu_mbus_add_window_remap_flags("pcie0.0",
+ KIRKWOOD_PCIE_MEM_PHYS_BASE,
+ KIRKWOOD_PCIE_MEM_SIZE,
+ MVEBU_MBUS_NO_REMAP,
+ MVEBU_MBUS_PCI_MEM);
+ mvebu_mbus_add_window_remap_flags("pcie1.0",
+ KIRKWOOD_PCIE1_IO_PHYS_BASE,
+ KIRKWOOD_PCIE1_IO_SIZE,
+ KIRKWOOD_PCIE1_IO_BUS_BASE,
+ MVEBU_MBUS_PCI_IO);
+ mvebu_mbus_add_window_remap_flags("pcie1.0",
+ KIRKWOOD_PCIE1_MEM_PHYS_BASE,
+ KIRKWOOD_PCIE1_MEM_SIZE,
+ MVEBU_MBUS_NO_REMAP,
+ MVEBU_MBUS_PCI_MEM);
+ mvebu_mbus_add_window("nand", KIRKWOOD_NAND_MEM_PHYS_BASE,
+ KIRKWOOD_NAND_MEM_SIZE);
+ mvebu_mbus_add_window("sram", KIRKWOOD_SRAM_PHYS_BASE,
+ KIRKWOOD_SRAM_SIZE);
+}
+
void __init kirkwood_l2_init(void)
{
#ifdef CONFIG_CACHE_FEROCEON_L2
@@ -675,7 +709,7 @@ void __init kirkwood_init(void)
*/
writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
- kirkwood_setup_cpu_mbus();
+ kirkwood_setup_wins();
kirkwood_l2_init();
@@ -30,7 +30,7 @@ void kirkwood_init(void);
void kirkwood_init_early(void);
void kirkwood_init_irq(void);
-void kirkwood_setup_cpu_mbus(void);
+void kirkwood_setup_wins(void);
void kirkwood_enable_pcie(void);
void kirkwood_pcie_id(u32 *dev, u32 *rev);
@@ -60,8 +60,9 @@
* Register Map
*/
#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x00000)
-#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000)
-#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE + 0x1500)
+#define DDR_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x00000)
+#define DDR_WINDOW_CPU_BASE (DDR_PHYS_BASE + 0x1500)
+#define DDR_WINDOW_CPU_SZ (0x20)
#define DDR_OPERATION_BASE (DDR_PHYS_BASE + 0x1418)
#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x10000)
@@ -80,6 +81,8 @@
#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE + 0x20000)
#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x20000)
+#define BRIDGE_WINS_BASE (BRIDGE_PHYS_BASE)
+#define BRIDGE_WINS_SZ (0x80)
#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE + 0x30000)
@@ -17,7 +17,6 @@
#include <asm/mach/pci.h>
#include <plat/pcie.h>
#include <mach/bridge-regs.h>
-#include <plat/addr-map.h>
#include "common.h"
static void kirkwood_enable_pcie_clk(const char *port)
@@ -3,7 +3,6 @@
#
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include
-obj-$(CONFIG_ARCH_KIRKWOOD) += addr-map.o
obj-$(CONFIG_ARCH_DOVE) += addr-map.o
obj-$(CONFIG_ARCH_ORION5X) += addr-map.o
obj-$(CONFIG_ARCH_MV78XX0) += addr-map.o