diff mbox

[v9,5/9] dmaengine: edma: Add TI EDMA device tree binding

Message ID 1362586540-10393-6-git-send-email-mporter@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Matt Porter March 6, 2013, 4:15 p.m. UTC
The binding definition is based on the generic DMA controller
binding.

Signed-off-by: Matt Porter <mporter@ti.com>
---
 Documentation/devicetree/bindings/dma/ti-edma.txt |   49 +++++++++++++++++++++
 1 file changed, 49 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/ti-edma.txt

Comments

Peter Korsgaard March 6, 2013, 8:24 p.m. UTC | #1
>>>>> "Matt" == Matt Porter <mporter@ti.com> writes:

 Matt> The binding definition is based on the generic DMA controller
 Matt> binding.

 Matt> Signed-off-by: Matt Porter <mporter@ti.com>
 Matt> ---
 Matt>  Documentation/devicetree/bindings/dma/ti-edma.txt |   49 +++++++++++++++++++++
 Matt>  1 file changed, 49 insertions(+)
 Matt>  create mode 100644 Documentation/devicetree/bindings/dma/ti-edma.txt

 Matt> diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
 Matt> new file mode 100644
 Matt> index 0000000..075a60e3
 Matt> --- /dev/null
 Matt> +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
 Matt> @@ -0,0 +1,49 @@
 Matt> +TI EDMA
 Matt> +
 Matt> +Required properties:
 Matt> +- compatible : "ti,edma3"
 Matt> +- ti,hwmods: Name of the hwmods associated to the EDMA
 Matt> +- ti,edma-regions: Number of regions
 Matt> +- ti,edma-slots: Number of slots
 Matt> +- ti,edma-queue-tc-map: List of transfer control to queue mappings
 Matt> +- ti,edma-queue-priority-map: List of queue priority mappings
 Matt> +- ti,edma-default-queue: Default queue value
 Matt> +
 Matt> +Optional properties:
 Matt> +- ti,edma-reserved-channels: List of reserved channel regions
 Matt> +- ti,edma-reserved-slots: List of reserved slot regions
 Matt> +- ti,edma-xbar-event-map: Crossbar event to channel map
 Matt> +
 Matt> +Example:
 Matt> +
 Matt> +edma: edma@49000000 {
 Matt> +	reg = <0x49000000 0x10000>;
 Matt> +	interrupt-parent = <&intc>;
 Matt> +	interrupts = <12 13 14>;

Probably interrupt-parent should be removed from the example as well to
match am33xx.dtsi
Matt Porter March 6, 2013, 8:31 p.m. UTC | #2
On Wed, Mar 06, 2013 at 08:24:06PM +0000, Peter Korsgaard wrote:
> >>>>> "Matt" == Matt Porter <mporter@ti.com> writes:
> 
>  Matt> The binding definition is based on the generic DMA controller
>  Matt> binding.
> 
>  Matt> Signed-off-by: Matt Porter <mporter@ti.com>
>  Matt> ---
>  Matt>  Documentation/devicetree/bindings/dma/ti-edma.txt |   49 +++++++++++++++++++++
>  Matt>  1 file changed, 49 insertions(+)
>  Matt>  create mode 100644 Documentation/devicetree/bindings/dma/ti-edma.txt
> 
>  Matt> diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
>  Matt> new file mode 100644
>  Matt> index 0000000..075a60e3
>  Matt> --- /dev/null
>  Matt> +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
>  Matt> @@ -0,0 +1,49 @@
>  Matt> +TI EDMA
>  Matt> +
>  Matt> +Required properties:
>  Matt> +- compatible : "ti,edma3"
>  Matt> +- ti,hwmods: Name of the hwmods associated to the EDMA
>  Matt> +- ti,edma-regions: Number of regions
>  Matt> +- ti,edma-slots: Number of slots
>  Matt> +- ti,edma-queue-tc-map: List of transfer control to queue mappings
>  Matt> +- ti,edma-queue-priority-map: List of queue priority mappings
>  Matt> +- ti,edma-default-queue: Default queue value
>  Matt> +
>  Matt> +Optional properties:
>  Matt> +- ti,edma-reserved-channels: List of reserved channel regions
>  Matt> +- ti,edma-reserved-slots: List of reserved slot regions
>  Matt> +- ti,edma-xbar-event-map: Crossbar event to channel map
>  Matt> +
>  Matt> +Example:
>  Matt> +
>  Matt> +edma: edma@49000000 {
>  Matt> +	reg = <0x49000000 0x10000>;
>  Matt> +	interrupt-parent = <&intc>;
>  Matt> +	interrupts = <12 13 14>;
> 
> Probably interrupt-parent should be removed from the example as well to
> match am33xx.dtsi

I'm not sure what the DT maintainers want here. Full context within the
example or the actual real usage where it's typically inherited.

Grant or Rob, any thoughts?

-Matt
Sekhar Nori March 12, 2013, 6:53 a.m. UTC | #3
On 3/6/2013 9:45 PM, Matt Porter wrote:
> The binding definition is based on the generic DMA controller
> binding.
> 
> Signed-off-by: Matt Porter <mporter@ti.com>

Okay the bindings the documented after they are used leading to some
confusion. This patch should be moved up the series. As I noted in my
other e-mail, some of these bindings are not really hardware description
and need to be re-looked.

Thanks,
Sekhar

> ---
>  Documentation/devicetree/bindings/dma/ti-edma.txt |   49 +++++++++++++++++++++
>  1 file changed, 49 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/dma/ti-edma.txt
> 
> diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
> new file mode 100644
> index 0000000..075a60e3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
> @@ -0,0 +1,49 @@
> +TI EDMA
> +
> +Required properties:
> +- compatible : "ti,edma3"
> +- ti,hwmods: Name of the hwmods associated to the EDMA
> +- ti,edma-regions: Number of regions
> +- ti,edma-slots: Number of slots
> +- ti,edma-queue-tc-map: List of transfer control to queue mappings
> +- ti,edma-queue-priority-map: List of queue priority mappings
> +- ti,edma-default-queue: Default queue value
> +
> +Optional properties:
> +- ti,edma-reserved-channels: List of reserved channel regions
> +- ti,edma-reserved-slots: List of reserved slot regions
> +- ti,edma-xbar-event-map: Crossbar event to channel map
> +
> +Example:
> +
> +edma: edma@49000000 {
> +	reg = <0x49000000 0x10000>;
> +	interrupt-parent = <&intc>;
> +	interrupts = <12 13 14>;
> +	compatible = "ti,edma3";
> +	ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
> +	#dma-cells = <1>;
> +	dma-channels = <64>;
> +	ti,edma-regions = <4>;
> +	ti,edma-slots = <256>;
> +	ti,edma-reserved-channels = <0  2
> +				     14 2
> +				     26 6
> +				     48 4
> +				     56 8>;
> +	ti,edma-reserved-slots = <0  2
> +				  14 2
> +				  26 6
> +				  48 4
> +				  56 8
> +				  64 127>;
> +	ti,edma-queue-tc-map = <0 0
> +				1 1
> +				2 2>;
> +	ti,edma-queue-priority-map = <0 0
> +				      1 1
> +				      2 2>;
> +	ti,edma-default-queue = <0>;
> +	ti,edma-xbar-event-map = <1 12
> +				  2 13>;
> +};
>
Matt Porter March 12, 2013, 4:09 p.m. UTC | #4
On Wed, Mar 06, 2013 at 08:24:06PM +0000, Peter Korsgaard wrote:
> >>>>> "Matt" == Matt Porter <mporter@ti.com> writes:
> 
>  Matt> The binding definition is based on the generic DMA controller
>  Matt> binding.
> 
>  Matt> Signed-off-by: Matt Porter <mporter@ti.com>
>  Matt> ---
>  Matt>  Documentation/devicetree/bindings/dma/ti-edma.txt |   49 +++++++++++++++++++++
>  Matt>  1 file changed, 49 insertions(+)
>  Matt>  create mode 100644 Documentation/devicetree/bindings/dma/ti-edma.txt
> 
>  Matt> diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
>  Matt> new file mode 100644
>  Matt> index 0000000..075a60e3
>  Matt> --- /dev/null
>  Matt> +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
>  Matt> @@ -0,0 +1,49 @@
>  Matt> +TI EDMA
>  Matt> +
>  Matt> +Required properties:
>  Matt> +- compatible : "ti,edma3"
>  Matt> +- ti,hwmods: Name of the hwmods associated to the EDMA
>  Matt> +- ti,edma-regions: Number of regions
>  Matt> +- ti,edma-slots: Number of slots
>  Matt> +- ti,edma-queue-tc-map: List of transfer control to queue mappings
>  Matt> +- ti,edma-queue-priority-map: List of queue priority mappings
>  Matt> +- ti,edma-default-queue: Default queue value
>  Matt> +
>  Matt> +Optional properties:
>  Matt> +- ti,edma-reserved-channels: List of reserved channel regions
>  Matt> +- ti,edma-reserved-slots: List of reserved slot regions
>  Matt> +- ti,edma-xbar-event-map: Crossbar event to channel map
>  Matt> +
>  Matt> +Example:
>  Matt> +
>  Matt> +edma: edma@49000000 {
>  Matt> +	reg = <0x49000000 0x10000>;
>  Matt> +	interrupt-parent = <&intc>;
>  Matt> +	interrupts = <12 13 14>;
> 
> Probably interrupt-parent should be removed from the example as well to
> match am33xx.dtsi

On second thought, I'm not sure we're going to get any direction on this
one so let's just do what feels right and make it reflect common usage
like you suggested.

Thanks,
Matt
Peter Korsgaard March 12, 2013, 4:16 p.m. UTC | #5
>>>>> "Matt" == Matt Porter <mporter@ti.com> writes:

Hi,

 Matt> +edma: edma@49000000 {
 Matt> +	reg = <0x49000000 0x10000>;
 Matt> +	interrupt-parent = <&intc>;
 Matt> +	interrupts = <12 13 14>;
 >> 
 >> Probably interrupt-parent should be removed from the example as well to
 >> match am33xx.dtsi

 Matt> On second thought, I'm not sure we're going to get any direction
 Matt> on this one so let's just do what feels right and make it reflect
 Matt> common usage like you suggested.

Sounds good to me!
Matt Porter March 12, 2013, 4:23 p.m. UTC | #6
On Tue, Mar 12, 2013 at 06:53:03AM +0000, Sekhar Nori wrote:
> On 3/6/2013 9:45 PM, Matt Porter wrote:
> > The binding definition is based on the generic DMA controller
> > binding.
> > 
> > Signed-off-by: Matt Porter <mporter@ti.com>
> 
> Okay the bindings the documented after they are used leading to some
> confusion. This patch should be moved up the series. As I noted in my
> other e-mail, some of these bindings are not really hardware description
> and need to be re-looked.

Sure, I'll reorder it.

-Matt

> > ---
> >  Documentation/devicetree/bindings/dma/ti-edma.txt |   49 +++++++++++++++++++++
> >  1 file changed, 49 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/dma/ti-edma.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
> > new file mode 100644
> > index 0000000..075a60e3
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
> > @@ -0,0 +1,49 @@
> > +TI EDMA
> > +
> > +Required properties:
> > +- compatible : "ti,edma3"
> > +- ti,hwmods: Name of the hwmods associated to the EDMA
> > +- ti,edma-regions: Number of regions
> > +- ti,edma-slots: Number of slots
> > +- ti,edma-queue-tc-map: List of transfer control to queue mappings
> > +- ti,edma-queue-priority-map: List of queue priority mappings
> > +- ti,edma-default-queue: Default queue value
> > +
> > +Optional properties:
> > +- ti,edma-reserved-channels: List of reserved channel regions
> > +- ti,edma-reserved-slots: List of reserved slot regions
> > +- ti,edma-xbar-event-map: Crossbar event to channel map
> > +
> > +Example:
> > +
> > +edma: edma@49000000 {
> > +	reg = <0x49000000 0x10000>;
> > +	interrupt-parent = <&intc>;
> > +	interrupts = <12 13 14>;
> > +	compatible = "ti,edma3";
> > +	ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
> > +	#dma-cells = <1>;
> > +	dma-channels = <64>;
> > +	ti,edma-regions = <4>;
> > +	ti,edma-slots = <256>;
> > +	ti,edma-reserved-channels = <0  2
> > +				     14 2
> > +				     26 6
> > +				     48 4
> > +				     56 8>;
> > +	ti,edma-reserved-slots = <0  2
> > +				  14 2
> > +				  26 6
> > +				  48 4
> > +				  56 8
> > +				  64 127>;
> > +	ti,edma-queue-tc-map = <0 0
> > +				1 1
> > +				2 2>;
> > +	ti,edma-queue-priority-map = <0 0
> > +				      1 1
> > +				      2 2>;
> > +	ti,edma-default-queue = <0>;
> > +	ti,edma-xbar-event-map = <1 12
> > +				  2 13>;
> > +};
> >
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
new file mode 100644
index 0000000..075a60e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -0,0 +1,49 @@ 
+TI EDMA
+
+Required properties:
+- compatible : "ti,edma3"
+- ti,hwmods: Name of the hwmods associated to the EDMA
+- ti,edma-regions: Number of regions
+- ti,edma-slots: Number of slots
+- ti,edma-queue-tc-map: List of transfer control to queue mappings
+- ti,edma-queue-priority-map: List of queue priority mappings
+- ti,edma-default-queue: Default queue value
+
+Optional properties:
+- ti,edma-reserved-channels: List of reserved channel regions
+- ti,edma-reserved-slots: List of reserved slot regions
+- ti,edma-xbar-event-map: Crossbar event to channel map
+
+Example:
+
+edma: edma@49000000 {
+	reg = <0x49000000 0x10000>;
+	interrupt-parent = <&intc>;
+	interrupts = <12 13 14>;
+	compatible = "ti,edma3";
+	ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
+	#dma-cells = <1>;
+	dma-channels = <64>;
+	ti,edma-regions = <4>;
+	ti,edma-slots = <256>;
+	ti,edma-reserved-channels = <0  2
+				     14 2
+				     26 6
+				     48 4
+				     56 8>;
+	ti,edma-reserved-slots = <0  2
+				  14 2
+				  26 6
+				  48 4
+				  56 8
+				  64 127>;
+	ti,edma-queue-tc-map = <0 0
+				1 1
+				2 2>;
+	ti,edma-queue-priority-map = <0 0
+				      1 1
+				      2 2>;
+	ti,edma-default-queue = <0>;
+	ti,edma-xbar-event-map = <1 12
+				  2 13>;
+};