@@ -152,7 +152,7 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
if (IS_ERR_VALUE(err))
goto out_free_cs;
- err = gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_WP, 0);
+ err = gpmc_configure(GPMC_CONFIG_WP, 0);
if (IS_ERR_VALUE(err))
goto out_free_cs;
}
@@ -550,16 +550,14 @@ void gpmc_cs_free(int cs)
EXPORT_SYMBOL(gpmc_cs_free);
/**
- * gpmc_cs_configure - write request to configure gpmc
- * @cs: chip select number
+ * gpmc_configure - write request to configure gpmc
* @cmd: command type
* @wval: value to write
* @return status of the operation
*/
-int gpmc_cs_configure(int cs, int cmd, int wval)
+int gpmc_configure(int cmd, int wval)
{
- int err = 0;
- u32 regval = 0;
+ u32 regval;
switch (cmd) {
case GPMC_ENABLE_IRQ:
@@ -579,47 +577,14 @@ int gpmc_cs_configure(int cs, int cmd, int wval)
gpmc_write_reg(GPMC_CONFIG, regval);
break;
- case GPMC_CONFIG_RDY_BSY:
- regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
- if (wval)
- regval |= WR_RD_PIN_MONITORING;
- else
- regval &= ~WR_RD_PIN_MONITORING;
- gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
- break;
-
- case GPMC_CONFIG_DEV_SIZE:
- regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
- /* clear 2 target bits */
- regval &= ~GPMC_CONFIG1_DEVICESIZE(3);
-
- /* set the proper value */
- regval |= GPMC_CONFIG1_DEVICESIZE(wval);
-
- gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
- break;
-
- case GPMC_CONFIG_DEV_TYPE:
- regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
- /* clear 4 target bits */
- regval &= ~(GPMC_CONFIG1_DEVICETYPE(3) |
- GPMC_CONFIG1_MUXTYPE(3));
- /* set the proper value */
- regval |= GPMC_CONFIG1_DEVICETYPE(wval);
- if (wval == GPMC_DEVICETYPE_NOR)
- regval |= GPMC_CONFIG1_MUXADDDATA;
- gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
- break;
-
default:
- printk(KERN_ERR "gpmc_configure_cs: Not supported\n");
- err = -EINVAL;
+ pr_err("%s: command not supported\n", __func__);
+ return -EINVAL;
}
- return err;
+ return 0;
}
-EXPORT_SYMBOL(gpmc_cs_configure);
+EXPORT_SYMBOL(gpmc_configure);
void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
{
@@ -59,9 +59,6 @@
#define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10)
#define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0)
#define GPMC_CONFIG1_MUXTYPE(val) ((val & 3) << 8)
-#define GPMC_CONFIG1_MUXNONMUX GPMC_CONFIG1_MUXTYPE(0)
-#define GPMC_CONFIG1_MUXAAD GPMC_CONFIG1_MUXTYPE(GPMC_MUX_AAD)
-#define GPMC_CONFIG1_MUXADDDATA GPMC_CONFIG1_MUXTYPE(GPMC_MUX_AD)
#define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4)
#define GPMC_CONFIG1_FCLK_DIV(val) (val & 3)
#define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1))
@@ -227,6 +224,6 @@ extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
extern void gpmc_cs_free(int cs);
extern void omap3_gpmc_save_context(void);
extern void omap3_gpmc_restore_context(void);
-extern int gpmc_cs_configure(int cs, int cmd, int wval);
+extern int gpmc_configure(int cmd, int wval);
#endif
With the addition of the gpmc_cs_program_settings(), we no longer need or use gpmc_cs_configure() to configure some of the GPMC chip-select options. So rename the function to gpmc_configure() and remove code that modifies options in the CONFIG1 register. Signed-off-by: Jon Hunter <jon-hunter@ti.com> --- arch/arm/mach-omap2/gpmc-nand.c | 2 +- arch/arm/mach-omap2/gpmc.c | 49 ++++++--------------------------------- arch/arm/mach-omap2/gpmc.h | 5 +--- 3 files changed, 9 insertions(+), 47 deletions(-)