From patchwork Sat Mar 16 06:16:47 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Lokesh Vutla X-Patchwork-Id: 2281681 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-process-083081@patchwork1.kernel.org Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) by patchwork1.kernel.org (Postfix) with ESMTP id 8E30A3FC8F for ; Sat, 16 Mar 2013 06:22:01 +0000 (UTC) Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1UGkSj-00081y-5W; Sat, 16 Mar 2013 06:19:25 +0000 Received: from comal.ext.ti.com ([198.47.26.152]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1UGkQa-00079B-J6 for linux-arm-kernel@lists.infradead.org; Sat, 16 Mar 2013 06:17:14 +0000 Received: from dbdp20.itg.ti.com ([172.24.170.38]) by comal.ext.ti.com (8.13.7/8.13.7) with ESMTP id r2G6H9mE011091; Sat, 16 Mar 2013 01:17:10 -0500 Received: from DBDE71.ent.ti.com (localhost [127.0.0.1]) by dbdp20.itg.ti.com (8.13.8/8.13.8) with ESMTP id r2G6H8ht015015; Sat, 16 Mar 2013 11:47:09 +0530 (IST) Received: from dbdp33.itg.ti.com (172.24.170.252) by DBDE71.ent.ti.com (172.24.170.149) with Microsoft SMTP Server id 14.1.323.3; Sat, 16 Mar 2013 11:47:08 +0530 Received: from a0131933lt.itg.ti.com (smtpvbd.itg.ti.com [172.24.170.250]) by dbdp33.itg.ti.com (8.13.8/8.13.8) with ESMTP id r2G6Gnm7003136; Sat, 16 Mar 2013 11:47:06 +0530 From: Lokesh Vutla To: Subject: [PATCH V2 7/8] memory: emif: errata i743: Prohibit usage of Power-Down mode Date: Sat, 16 Mar 2013 11:46:47 +0530 Message-ID: <1363414608-7448-8-git-send-email-lokeshvutla@ti.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1363414608-7448-1-git-send-email-lokeshvutla@ti.com> References: <1363414608-7448-1-git-send-email-lokeshvutla@ti.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20130316_021712_736050_43AC7E5D X-CRM114-Status: GOOD ( 13.15 ) X-Spam-Score: -9.3 (---------) X-Spam-Report: SpamAssassin version 3.3.2 on merlin.infradead.org summary: Content analysis details: (-9.3 points) pts rule name description ---- ---------------------- -------------------------------------------------- -5.0 RCVD_IN_DNSWL_HI RBL: Sender listed at http://www.dnswl.org/, high trust [198.47.26.152 listed in list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record -2.4 RP_MATCHES_RCVD Envelope sender domain matches handover relay domain -1.9 BAYES_00 BODY: Bayes spam probability is 0 to 1% [score: 0.0000] Cc: Grygorii Strashko , Vitaly Chernooky , lokeshvutla@ti.com, linux-kernel@vger.kernel.org, santosh.shilimkar@ti.com, Oleksandr Dmytryshyn , linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org From: Grygorii Strashko ERRATA DESCRIPTION : The EMIF supports power-down state for low power. The EMIF automatically puts the SDRAM into power-down after the memory is not accessed for a defined number of cycles and the EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE bit field is set to 0x4. As the EMIF supports automatic output impedance calibration, a ZQ calibration long command is issued every time it exits active power-down and precharge power-down modes. The EMIF waits and blocks any other command during this calibration. The EMIF does not allow selective disabling of ZQ calibration upon exit of power-down mode. Due to very short periods of power-down cycles, ZQ calibration overhead creates bandwidth issues and increases overall system power consumption. On the other hand, issuing ZQ calibration long commands when exiting self-refresh is still required. WORKAROUND : Because there is no power consumption benefit of the power-down due to the calibration and there is a performance risk, the guideline is to not allow power-down state and, therefore, to not have set the EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE bit field to 0x4. This is applicable only for EMIF4D IP used in OMAP4 Soc's. Signed-off-by: Grygorii Strashko Signed-off-by: Vitaly Chernooky Signed-off-by: Oleksandr Dmytryshyn Signed-off-by: Lokesh Vutla Acked-by: Santosh Shilimkar --- Changes since V1: Updated the change log and fixed a typo in a comment. drivers/memory/emif.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c index d27111e..9b27c2b 100644 --- a/drivers/memory/emif.c +++ b/drivers/memory/emif.c @@ -257,6 +257,41 @@ static void set_lpmode(struct emif_data *emif, u8 lpmode) u32 temp; void __iomem *base = emif->base; + /* + * Workaround for errata i743 - LPDDR2 Power-Down State is Not + * Efficient + * + * i743 DESCRIPTION: + * The EMIF supports power-down state for low power. The EMIF + * automatically puts the SDRAM into power-down after the memory is + * not accessed for a defined number of cycles and the + * EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE bit field is set to 0x4. + * As the EMIF supports automatic output impedance calibration, a ZQ + * calibration long command is issued every time it exits active + * power-down and precharge power-down modes. The EMIF waits and + * blocks any other command during this calibration. + * The EMIF does not allow selective disabling of ZQ calibration upon + * exit of power-down mode. Due to very short periods of power-down + * cycles, ZQ calibration overhead creates bandwidth issues and + * increases overall system power consumption. On the other hand, + * issuing ZQ calibration long commands when exiting self-refresh is + * still required. + * + * WORKAROUND + * Because there is no power consumption benefit of the power-down due + * to the calibration and there is a performance risk, the guideline + * is to not allow power-down state and, therefore, to not have set + * the EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE bit field to 0x4. + */ + if ((emif->plat_data->ip_rev == EMIF_4D) && + (EMIF_LP_MODE_PWR_DN == lpmode)) { + WARN_ONCE(1, + "REG_LP_MODE = LP_MODE_PWR_DN(4) is prohibited by" + "erratum i743 switch to LP_MODE_SELF_REFRESH(2)\n"); + /* rollback LP_MODE to Self-refresh mode */ + lpmode = EMIF_LP_MODE_SELF_REFRESH; + } + temp = readl(base + EMIF_POWER_MANAGEMENT_CONTROL); temp &= ~LP_MODE_MASK; temp |= (lpmode << LP_MODE_SHIFT);