From patchwork Thu Mar 21 21:51:07 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Arnd Bergmann X-Patchwork-Id: 2317321 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-process-083081@patchwork2.kernel.org Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) by patchwork2.kernel.org (Postfix) with ESMTP id CA56BDF264 for ; Thu, 21 Mar 2013 21:59:32 +0000 (UTC) Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1UInSw-0007Ei-EX; Thu, 21 Mar 2013 21:56:06 +0000 Received: from moutng.kundenserver.de ([212.227.17.9]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1UInOA-0005BA-Ho for linux-arm-kernel@lists.infradead.org; Thu, 21 Mar 2013 21:51:18 +0000 Received: from wuerfel.lan (HSI-KBW-46-223-90-92.hsi.kabel-badenwuerttemberg.de [46.223.90.92]) by mrelayeu.kundenserver.de (node=mrbap4) with ESMTP (Nemesis) id 0MPoiw-1UMfH92fIY-005JLy; Thu, 21 Mar 2013 22:51:05 +0100 From: Arnd Bergmann To: Linus Walleij Subject: [PATCH 2/9] ARM: ux500: split out prcmu initialization Date: Thu, 21 Mar 2013 22:51:07 +0100 Message-Id: <1363902674-6456-3-git-send-email-arnd@arndb.de> X-Mailer: git-send-email 1.8.1.2 In-Reply-To: <1363902674-6456-1-git-send-email-arnd@arndb.de> References: <1363866553-15054-1-git-send-email-linus.walleij@stericsson.com> <1363902674-6456-1-git-send-email-arnd@arndb.de> X-Provags-ID: V02:K0:dcQNFHUpaL0iWOwFKE0yQ270FX0gCTUnEWA91tBWF8Y GUxcdO4ccXUkeBWGV7sy+jKJtbcYbqPh73jh8tG9utRaHZx6YA D9/wfmrHiTnBCI2BFl4D7OPGOqaa1WttVzEwagyrRkVTEwCvJR /cGt9SBrHf2YSaQsNYC3Qs44gJpwtcvpe8MsgdXGeaXRCZ0pzu OSew2jRbBBW/Efak39xOGnRBoSZl+v9J6OkmGtUMM+0jwU45i4 HX+3QqbEQFO+cM9zQdFoINfloDdZ8fKbMol5bVl9dj/qcpOSYT EtfwRl3LD90JWz9zeZ1a0cixU83UX9Z+msrW5qKLQ8OGdbzAPP 8s7zzAp5xwM4zQhcsNzMgnhCZ6+mNFQ7L8Jdac065 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20130321_175110_905467_9D9FB18C X-CRM114-Status: GOOD ( 23.82 ) X-Spam-Score: -1.9 (-) X-Spam-Report: SpamAssassin version 3.3.2 on merlin.infradead.org summary: Content analysis details: (-1.9 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 RCVD_IN_DNSWL_NONE RBL: Sender listed at http://www.dnswl.org/, no trust [212.227.17.9 listed in list.dnswl.org] -0.0 SPF_HELO_PASS SPF: HELO matches SPF record -1.9 BAYES_00 BODY: Bayes spam probability is 0 to 1% [score: 0.0000] Cc: Arnd Bergmann , linux-arm-kernel@lists.infradead.org X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org This untangles the final bits of the prcmu code from the platform code: * The IRQ_PRCMU_* definitions move from irqs-db8500.h into prcmu.c because they are only of local significance. * u8500_thsens_device goes into the prcmu, because it uses a PRCMU IRQ that the platform does not see. * IRQ_DB8500_AB8500 and IRQ_PRCMU_BASE go into the platform data because the PRCMU does not see it. Signed-off-by: Arnd Bergmann --- arch/arm/mach-ux500/board-mop500.c | 58 ---------- arch/arm/mach-ux500/devices-db8500.c | 2 + arch/arm/mach-ux500/include/mach/irqs-db8500.h | 25 ----- drivers/mfd/db8500-prcmu.c | 140 ++++++++++++++++++++----- include/linux/mfd/dbx500-prcmu.h | 2 + 5 files changed, 115 insertions(+), 112 deletions(-) diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 215a389..682b321 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -239,63 +239,6 @@ struct ab8500_platform_data ab8500_platdata = { .codec = &ab8500_codec_pdata, }; -/* - * Thermal Sensor - */ - -static struct resource db8500_thsens_resources[] = { - { - .name = "IRQ_HOTMON_LOW", - .start = IRQ_PRCMU_HOTMON_LOW, - .end = IRQ_PRCMU_HOTMON_LOW, - .flags = IORESOURCE_IRQ, - }, - { - .name = "IRQ_HOTMON_HIGH", - .start = IRQ_PRCMU_HOTMON_HIGH, - .end = IRQ_PRCMU_HOTMON_HIGH, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct db8500_thsens_platform_data db8500_thsens_data = { - .trip_points[0] = { - .temp = 70000, - .type = THERMAL_TRIP_ACTIVE, - .cdev_name = { - [0] = "thermal-cpufreq-0", - }, - }, - .trip_points[1] = { - .temp = 75000, - .type = THERMAL_TRIP_ACTIVE, - .cdev_name = { - [0] = "thermal-cpufreq-0", - }, - }, - .trip_points[2] = { - .temp = 80000, - .type = THERMAL_TRIP_ACTIVE, - .cdev_name = { - [0] = "thermal-cpufreq-0", - }, - }, - .trip_points[3] = { - .temp = 85000, - .type = THERMAL_TRIP_CRITICAL, - }, - .num_trips = 4, -}; - -static struct platform_device u8500_thsens_device = { - .name = "db8500-thermal", - .resource = db8500_thsens_resources, - .num_resources = ARRAY_SIZE(db8500_thsens_resources), - .dev = { - .platform_data = &db8500_thsens_data, - }, -}; - static struct platform_device u8500_cpufreq_cooling_device = { .name = "db8500-cpufreq-cooling", }; @@ -656,7 +599,6 @@ static struct platform_device *snowball_platform_devs[] __initdata = { &snowball_key_dev, &snowball_sbnet_dev, &snowball_gpio_en_3v3_regulator_dev, - &u8500_thsens_device, &u8500_cpufreq_cooling_device, &sdi0_regulator, }; diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index 9152aca..3b7599d 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -199,6 +199,8 @@ struct platform_device u8500_ske_keypad_device = { struct prcmu_pdata db8500_prcmu_pdata = { .ab_platdata = &ab8500_platdata, + .ab_irq = IRQ_DB8500_AB8500, + .irq_base = IRQ_PRCMU_BASE, .version_offset = DB8500_PRCMU_FW_VERSION_OFFSET, .legacy_offset = DB8500_PRCMU_LEGACY_OFFSET, }; diff --git a/arch/arm/mach-ux500/include/mach/irqs-db8500.h b/arch/arm/mach-ux500/include/mach/irqs-db8500.h index 68bc149..f3a9d59 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-db8500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-db8500.h @@ -109,31 +109,6 @@ /* Virtual interrupts corresponding to the PRCMU wakeups. */ #define IRQ_PRCMU_BASE IRQ_SOC_START -#define NUM_PRCMU_WAKEUPS (IRQ_PRCMU_END - IRQ_PRCMU_BASE) - -#define IRQ_PRCMU_RTC (IRQ_PRCMU_BASE) -#define IRQ_PRCMU_RTT0 (IRQ_PRCMU_BASE + 1) -#define IRQ_PRCMU_RTT1 (IRQ_PRCMU_BASE + 2) -#define IRQ_PRCMU_HSI0 (IRQ_PRCMU_BASE + 3) -#define IRQ_PRCMU_HSI1 (IRQ_PRCMU_BASE + 4) -#define IRQ_PRCMU_CA_WAKE (IRQ_PRCMU_BASE + 5) -#define IRQ_PRCMU_USB (IRQ_PRCMU_BASE + 6) -#define IRQ_PRCMU_ABB (IRQ_PRCMU_BASE + 7) -#define IRQ_PRCMU_ABB_FIFO (IRQ_PRCMU_BASE + 8) -#define IRQ_PRCMU_ARM (IRQ_PRCMU_BASE + 9) -#define IRQ_PRCMU_MODEM_SW_RESET_REQ (IRQ_PRCMU_BASE + 10) -#define IRQ_PRCMU_GPIO0 (IRQ_PRCMU_BASE + 11) -#define IRQ_PRCMU_GPIO1 (IRQ_PRCMU_BASE + 12) -#define IRQ_PRCMU_GPIO2 (IRQ_PRCMU_BASE + 13) -#define IRQ_PRCMU_GPIO3 (IRQ_PRCMU_BASE + 14) -#define IRQ_PRCMU_GPIO4 (IRQ_PRCMU_BASE + 15) -#define IRQ_PRCMU_GPIO5 (IRQ_PRCMU_BASE + 16) -#define IRQ_PRCMU_GPIO6 (IRQ_PRCMU_BASE + 17) -#define IRQ_PRCMU_GPIO7 (IRQ_PRCMU_BASE + 18) -#define IRQ_PRCMU_GPIO8 (IRQ_PRCMU_BASE + 19) -#define IRQ_PRCMU_CA_SLEEP (IRQ_PRCMU_BASE + 20) -#define IRQ_PRCMU_HOTMON_LOW (IRQ_PRCMU_BASE + 21) -#define IRQ_PRCMU_HOTMON_HIGH (IRQ_PRCMU_BASE + 22) #define IRQ_PRCMU_END (IRQ_PRCMU_BASE + 23) /* diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 03e2aed..bc8f870 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -33,7 +33,7 @@ #include #include #include -#include +#include #include "dbx500-prcmu-regs.h" /* Index of different voltages to be used when accessing AVSData */ @@ -273,8 +273,34 @@ static struct irq_domain *db8500_irq_domain; * the bits in the bit field are not. (The bits also have a tendency to move * around, to further complicate matters.) */ -#define IRQ_INDEX(_name) ((IRQ_PRCMU_##_name) - IRQ_PRCMU_BASE) +#define IRQ_INDEX(_name) ((IRQ_PRCMU_##_name)) #define IRQ_ENTRY(_name)[IRQ_INDEX(_name)] = (WAKEUP_BIT_##_name) + +#define IRQ_PRCMU_RTC 0 +#define IRQ_PRCMU_RTT0 1 +#define IRQ_PRCMU_RTT1 2 +#define IRQ_PRCMU_HSI0 3 +#define IRQ_PRCMU_HSI1 4 +#define IRQ_PRCMU_CA_WAKE 5 +#define IRQ_PRCMU_USB 6 +#define IRQ_PRCMU_ABB 7 +#define IRQ_PRCMU_ABB_FIFO 8 +#define IRQ_PRCMU_ARM 9 +#define IRQ_PRCMU_MODEM_SW_RESET_REQ 10 +#define IRQ_PRCMU_GPIO0 11 +#define IRQ_PRCMU_GPIO1 12 +#define IRQ_PRCMU_GPIO2 13 +#define IRQ_PRCMU_GPIO3 14 +#define IRQ_PRCMU_GPIO4 15 +#define IRQ_PRCMU_GPIO5 16 +#define IRQ_PRCMU_GPIO6 17 +#define IRQ_PRCMU_GPIO7 18 +#define IRQ_PRCMU_GPIO8 19 +#define IRQ_PRCMU_CA_SLEEP 20 +#define IRQ_PRCMU_HOTMON_LOW 21 +#define IRQ_PRCMU_HOTMON_HIGH 22 +#define NUM_PRCMU_WAKEUPS 23 + static u32 prcmu_irq_bit[NUM_PRCMU_WAKEUPS] = { IRQ_ENTRY(RTC), IRQ_ENTRY(RTT0), @@ -2649,14 +2675,13 @@ static struct irq_domain_ops db8500_irq_ops = { .xlate = irq_domain_xlate_twocell, }; -static int db8500_irq_init(struct device_node *np) +static int db8500_irq_init(struct device_node *np, int irq_base) { - int irq_base = 0; int i; /* In the device tree case, just take some IRQs */ if (!np) - irq_base = IRQ_PRCMU_BASE; + irq_base = 0; db8500_irq_domain = irq_domain_add_simple( np, NUM_PRCMU_WAKEUPS, irq_base, @@ -2717,7 +2742,7 @@ void __init db8500_prcmu_early_init(u32 phy_base, u32 size) * subsequently replaces with a real remap. After the merge of * the mailbox subsystem all of this early code goes away, and the * clock driver can probe independently. An early initcall will - * still be needed, but it can be diverted into drivers/clk/ux500/*. + * still be needed, but it can be diverted into drivers/clk/ux500/. */ prcmu_base = ioremap(phy_base, size); if (!prcmu_base) @@ -2988,18 +3013,57 @@ static struct regulator_init_data db8500_regulators[DB8500_NUM_REGULATORS] = { }, }; -static struct resource ab8500_resources[] = { - [0] = { - .start = IRQ_DB8500_AB8500, - .end = IRQ_DB8500_AB8500, - .flags = IORESOURCE_IRQ - } -}; - static struct ux500_wdt_data db8500_wdt_pdata = { .timeout = 600, /* 10 minutes */ .has_28_bits_resolution = true, }; +/* + * Thermal Sensor + */ + +static struct resource db8500_thsens_resources[] = { + { + .name = "IRQ_HOTMON_LOW", + .start = IRQ_PRCMU_HOTMON_LOW, + .end = IRQ_PRCMU_HOTMON_LOW, + .flags = IORESOURCE_IRQ, + }, + { + .name = "IRQ_HOTMON_HIGH", + .start = IRQ_PRCMU_HOTMON_HIGH, + .end = IRQ_PRCMU_HOTMON_HIGH, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct db8500_thsens_platform_data db8500_thsens_data = { + .trip_points[0] = { + .temp = 70000, + .type = THERMAL_TRIP_ACTIVE, + .cdev_name = { + [0] = "thermal-cpufreq-0", + }, + }, + .trip_points[1] = { + .temp = 75000, + .type = THERMAL_TRIP_ACTIVE, + .cdev_name = { + [0] = "thermal-cpufreq-0", + }, + }, + .trip_points[2] = { + .temp = 80000, + .type = THERMAL_TRIP_ACTIVE, + .cdev_name = { + [0] = "thermal-cpufreq-0", + }, + }, + .trip_points[3] = { + .temp = 85000, + .type = THERMAL_TRIP_CRITICAL, + }, + .num_trips = 4, +}; static struct mfd_cell db8500_prcmu_devs[] = { { @@ -3021,11 +3085,10 @@ static struct mfd_cell db8500_prcmu_devs[] = { .id = -1, }, { - .name = "ab8500-core", - .of_compatible = "stericsson,ab8500", - .num_resources = ARRAY_SIZE(ab8500_resources), - .resources = ab8500_resources, - .id = AB8500_VERSION_AB8500, + .name = "db8500-thermal", + .num_resources = ARRAY_SIZE(db8500_thsens_resources), + .resources = db8500_thsens_resources, + .platform_data = &db8500_thsens_data, }, }; @@ -3037,6 +3100,24 @@ static void db8500_prcmu_update_cpufreq(void) } } +static int db8500_prcmu_register_ab8500(struct device *parent, + struct ab8500_platform_data *pdata, + int irq) +{ + struct resource ab8500_resource = DEFINE_RES_IRQ(irq); + struct mfd_cell ab8500_cell = { + .name = "ab8500-core", + .of_compatible = "stericsson,ab8500", + .id = AB8500_VERSION_AB8500, + .platform_data = pdata, + .pdata_size = sizeof(struct ab8500_platform_data), + .resources = &ab8500_resource, + .num_resources = 1, + }; + + return mfd_add_devices(parent, 0, &ab8500_cell, 1, NULL, 0, NULL); +} + /** * prcmu_fw_init - arch init call for the Linux PRCMU fw init logic * @@ -3045,7 +3126,7 @@ static int db8500_prcmu_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; struct prcmu_pdata *pdata = dev_get_platdata(&pdev->dev); - int irq = 0, err = 0, i; + int irq = 0, err = 0; struct resource *res; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu"); @@ -3086,26 +3167,27 @@ static int db8500_prcmu_probe(struct platform_device *pdev) goto no_irq_return; } - db8500_irq_init(np); - - for (i = 0; i < ARRAY_SIZE(db8500_prcmu_devs); i++) { - if (!strcmp(db8500_prcmu_devs[i].name, "ab8500-core")) { - db8500_prcmu_devs[i].platform_data = pdata->ab_platdata; - db8500_prcmu_devs[i].pdata_size = sizeof(struct ab8500_platform_data); - } - } + db8500_irq_init(np, pdata->irq_base); prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET); db8500_prcmu_update_cpufreq(); err = mfd_add_devices(&pdev->dev, 0, db8500_prcmu_devs, - ARRAY_SIZE(db8500_prcmu_devs), NULL, 0, NULL); + ARRAY_SIZE(db8500_prcmu_devs), NULL, 0, db8500_irq_domain); if (err) { pr_err("prcmu: Failed to add subdevices\n"); return err; } + err = db8500_prcmu_register_ab8500(&pdev->dev, pdata->ab_platdata, + pdata->ab_irq); + if (err) { + mfd_remove_devices(&pdev->dev); + pr_err("prcmu: Failed to add ab8500 subdevice\n"); + goto no_irq_return; + } + pr_info("DB8500 PRCMU initialized\n"); no_irq_return: diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index fc43cec..689e6a0 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -237,6 +237,8 @@ struct prcmu_pdata bool enable_set_ddr_opp; bool enable_ape_opp_100_voltage; struct ab8500_platform_data *ab_platdata; + int ab_irq; + int irq_base; u32 version_offset; u32 legacy_offset; u32 adt_offset;