@@ -963,6 +963,15 @@ static struct platform_device nand_flash_device = {
},
};
+/*
+ * The card detect pin of the top SD/MMC slot (CN7) is active low and is
+ * connected to GPIO A22 of SH7372 (GPIO 41).
+ */
+static int slot_cn7_get_cd(struct platform_device *pdev)
+{
+ return !gpio_get_value(41);
+}
+
/* SDHI0 */
static struct sh_mobile_sdhi_info sdhi0_info = {
.dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
@@ -973,21 +982,21 @@ static struct sh_mobile_sdhi_info sdhi0_info = {
};
static struct resource sdhi0_resources[] = {
- {
+ [0] = {
.name = "SDHI0",
.start = 0xe6850000,
.end = 0xe68500ff,
.flags = IORESOURCE_MEM,
- }, {
- .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT,
+ },
+ [1] = {
.start = evt2irq(0x0e00) /* SDHI0_SDHI0I0 */,
.flags = IORESOURCE_IRQ,
- }, {
- .name = SH_MOBILE_SDHI_IRQ_SDCARD,
+ },
+ [2] = {
.start = evt2irq(0x0e20) /* SDHI0_SDHI0I1 */,
.flags = IORESOURCE_IRQ,
- }, {
- .name = SH_MOBILE_SDHI_IRQ_SDIO,
+ },
+ [3] = {
.start = evt2irq(0x0e40) /* SDHI0_SDHI0I2 */,
.flags = IORESOURCE_IRQ,
},
@@ -1005,28 +1014,34 @@ static struct platform_device sdhi0_device = {
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
/* SDHI1 */
-
-/* GPIO_PORT41 can trigger IRQ8, but it is used by USBHS1, we have to poll */
static struct sh_mobile_sdhi_info sdhi1_info = {
.dma_slave_tx = SHDMA_SLAVE_SDHI1_TX,
.dma_slave_rx = SHDMA_SLAVE_SDHI1_RX,
- .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_USE_GPIO_CD,
+ .tmio_ocr_mask = MMC_VDD_165_195,
+ .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE,
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
MMC_CAP_NEEDS_POLL,
- .cd_gpio = GPIO_PORT41,
+ .get_cd = slot_cn7_get_cd,
};
static struct resource sdhi1_resources[] = {
- {
+ [0] = {
.name = "SDHI1",
.start = 0xe6860000,
.end = 0xe68600ff,
.flags = IORESOURCE_MEM,
- }, {
+ },
+ [1] = {
+ .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT,
+ .start = evt2irq(0x0e80), /* SDHI1_SDHI1I0 */
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
.name = SH_MOBILE_SDHI_IRQ_SDCARD,
.start = evt2irq(0x0ea0), /* SDHI1_SDHI1I1 */
.flags = IORESOURCE_IRQ,
- }, {
+ },
+ [3] = {
.name = SH_MOBILE_SDHI_IRQ_SDIO,
.start = evt2irq(0x0ec0), /* SDHI1_SDHI1I2 */
.flags = IORESOURCE_IRQ,
@@ -1044,32 +1059,43 @@ static struct platform_device sdhi1_device = {
};
#endif
-/* SDHI2 */
-
/*
* The card detect pin of the top SD/MMC slot (CN23) is active low and is
- * connected to GPIO SCIFB_SCK of SH7372 (GPIO_PORT162).
+ * connected to GPIO SCIFB_SCK of SH7372 (162).
*/
+static int slot_cn23_get_cd(struct platform_device *pdev)
+{
+ return !gpio_get_value(162);
+}
+
+/* SDHI2 */
static struct sh_mobile_sdhi_info sdhi2_info = {
.dma_slave_tx = SHDMA_SLAVE_SDHI2_TX,
.dma_slave_rx = SHDMA_SLAVE_SDHI2_RX,
- .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_USE_GPIO_CD,
+ .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE,
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
MMC_CAP_NEEDS_POLL,
- .cd_gpio = GPIO_PORT162,
+ .get_cd = slot_cn23_get_cd,
};
static struct resource sdhi2_resources[] = {
- {
+ [0] = {
.name = "SDHI2",
.start = 0xe6870000,
.end = 0xe68700ff,
.flags = IORESOURCE_MEM,
- }, {
+ },
+ [1] = {
+ .name = SH_MOBILE_SDHI_IRQ_CARD_DETECT,
+ .start = evt2irq(0x1200), /* SDHI2_SDHI2I0 */
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
.name = SH_MOBILE_SDHI_IRQ_SDCARD,
.start = evt2irq(0x1220), /* SDHI2_SDHI2I1 */
.flags = IORESOURCE_IRQ,
- }, {
+ },
+ [3] = {
.name = SH_MOBILE_SDHI_IRQ_SDIO,
.start = evt2irq(0x1240), /* SDHI2_SDHI2I2 */
.flags = IORESOURCE_IRQ,
@@ -1108,12 +1134,11 @@ static struct resource sh_mmcif_resources[] = {
static struct sh_mmcif_plat_data sh_mmcif_plat = {
.sup_pclk = 0,
+ .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
.caps = MMC_CAP_4_BIT_DATA |
MMC_CAP_8_BIT_DATA |
MMC_CAP_NEEDS_POLL,
- .use_cd_gpio = true,
- /* card detect pin for SD/MMC slot (CN7) */
- .cd_gpio = GPIO_PORT41,
+ .get_cd = slot_cn7_get_cd,
.slave_id_tx = SHDMA_SLAVE_MMCIF_TX,
.slave_id_rx = SHDMA_SLAVE_MMCIF_RX,
};
@@ -1238,10 +1263,9 @@ static struct platform_device *mackerel_devices[] __initdata = {
&sdhi0_device,
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
&sdhi1_device,
-#else
- &sh_mmcif_device,
#endif
&sdhi2_device,
+ &sh_mmcif_device,
&ceu_device,
&mackerel_camera,
&hdmi_device,
@@ -1348,11 +1372,10 @@ static void __init mackerel_init(void)
{ "A3SP", &usbhs0_device, },
{ "A3SP", &usbhs1_device, },
{ "A3SP", &nand_flash_device, },
+ { "A3SP", &sh_mmcif_device, },
{ "A3SP", &sdhi0_device, },
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
{ "A3SP", &sdhi1_device, },
-#else
- { "A3SP", &sh_mmcif_device, },
#endif
{ "A3SP", &sdhi2_device, },
{ "A4R", &ceu_device, },
@@ -1463,35 +1486,11 @@ static void __init mackerel_init(void)
/* SDHI0 PORT172 card-detect IRQ26 */
gpio_request(GPIO_FN_IRQ26_172, NULL);
-#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
- /* enable SDHI1 */
- gpio_request(GPIO_FN_SDHICMD1, NULL);
- gpio_request(GPIO_FN_SDHICLK1, NULL);
- gpio_request(GPIO_FN_SDHID1_3, NULL);
- gpio_request(GPIO_FN_SDHID1_2, NULL);
- gpio_request(GPIO_FN_SDHID1_1, NULL);
- gpio_request(GPIO_FN_SDHID1_0, NULL);
-#else
- /* MMCIF */
- gpio_request(GPIO_FN_MMCD0_0, NULL);
- gpio_request(GPIO_FN_MMCD0_1, NULL);
- gpio_request(GPIO_FN_MMCD0_2, NULL);
- gpio_request(GPIO_FN_MMCD0_3, NULL);
- gpio_request(GPIO_FN_MMCD0_4, NULL);
- gpio_request(GPIO_FN_MMCD0_5, NULL);
- gpio_request(GPIO_FN_MMCD0_6, NULL);
- gpio_request(GPIO_FN_MMCD0_7, NULL);
- gpio_request(GPIO_FN_MMCCMD0, NULL);
- gpio_request(GPIO_FN_MMCCLK0, NULL);
-#endif
+ /* card detect pin for MMC slot (CN7) */
+ gpio_request_one(41, GPIOF_IN, NULL);
- /* enable SDHI2 */
- gpio_request(GPIO_FN_SDHICMD2, NULL);
- gpio_request(GPIO_FN_SDHICLK2, NULL);
- gpio_request(GPIO_FN_SDHID2_3, NULL);
- gpio_request(GPIO_FN_SDHID2_2, NULL);
- gpio_request(GPIO_FN_SDHID2_1, NULL);
- gpio_request(GPIO_FN_SDHID2_0, NULL);
+ /* card detect pin for microSD slot (CN23) */
+ gpio_request_one(162, GPIOF_IN, NULL);
/* FLCTL */
gpio_request(GPIO_FN_D0_NAF0, NULL);
This reverts commit 626a645eb75415255aad3162f4da3f6988f0c8ec. This appears to be incompatible with "ARM: shmobile: sh7372: Remove SDHI and MMCIF function GPIOs" Reverting this change resolves the following build failure: arch/arm/mach-shmobile/board-mackerel.c: In function ‘mackerel_init’: arch/arm/mach-shmobile/board-mackerel.c:1468: error: ‘GPIO_FN_SDHICMD1’ undeclared (first use in this function) arch/arm/mach-shmobile/board-mackerel.c:1468: error: (Each undeclared identifier is reported only once arch/arm/mach-shmobile/board-mackerel.c:1468: error: for each function it appears in.) arch/arm/mach-shmobile/board-mackerel.c:1469: error: ‘GPIO_FN_SDHICLK1’ undeclared (first use in this function) arch/arm/mach-shmobile/board-mackerel.c:1470: error: ‘GPIO_FN_SDHID1_3’ undeclared (first use in this function) arch/arm/mach-shmobile/board-mackerel.c:1471: error: ‘GPIO_FN_SDHID1_2’ undeclared (first use in this function) arch/arm/mach-shmobile/board-mackerel.c:1472: error: ‘GPIO_FN_SDHID1_1’ undeclared (first use in this function) arch/arm/mach-shmobile/board-mackerel.c:1473: error: ‘GPIO_FN_SDHID1_0’ undeclared (first use in this function) arch/arm/mach-shmobile/board-mackerel.c:1489: error: ‘GPIO_FN_SDHICMD2’ undeclared (first use in this function) arch/arm/mach-shmobile/board-mackerel.c:1490: error: ‘GPIO_FN_SDHICLK2’ undeclared (first use in this function) arch/arm/mach-shmobile/board-mackerel.c:1491: error: ‘GPIO_FN_SDHID2_3’ undeclared (first use in this function) arch/arm/mach-shmobile/board-mackerel.c:1492: error: ‘GPIO_FN_SDHID2_2’ undeclared (first use in this function) arch/arm/mach-shmobile/board-mackerel.c:1493: error: ‘GPIO_FN_SDHID2_1’ undeclared (first use in this function) arch/arm/mach-shmobile/board-mackerel.c:1494: error: ‘GPIO_FN_SDHID2_0’ undeclared (first use in this function) Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> --- arch/arm/mach-shmobile/board-mackerel.c | 113 +++++++++++++++---------------- 1 file changed, 56 insertions(+), 57 deletions(-)