diff --git a/Documentation/devicetree/bindings/clock/silabs,si5351.txt b/Documentation/devicetree/bindings/clock/silabs,si5351.txt
new file mode 100644
index 0000000..cc37465
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/silabs,si5351.txt
@@ -0,0 +1,114 @@
+Binding for Silicon Labs Si5351a/b/c programmable i2c clock generator.
+
+Reference
+[1] Si5351A/B/C Data Sheet
+    http://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf
+
+The Si5351a/b/c are programmable i2c clock generators with upto 8 output
+clocks. Si5351a also has a reduced pin-count package (MSOP10) where only
+3 output clocks are accessible. The internal structure of the clock
+generators can be found in [1].
+
+==I2C device node==
+
+Required properties:
+- compatible: shall be one of "silabs,si5351{a,a-msop,b,c}".
+- reg: i2c device address, shall be 0x60 or 0x61.
+- #clock-cells: from common clock binding; shall be set to 1.
+- clocks: from common clock binding; list of parent clock
+  handles, shall be xtal reference clock or xtal and clkin for
+  si5351c only.
+- #address-cells: shall be set to 1.
+- #size-cells: shall be set to 0.
+
+Optional properties:
+- silabs,pll-source: pair of (number, source) for each pll. Allows
+  to overwrite clock source of pll A (number=0) or B (number=1).
+
+==Child nodes==
+
+Each of the clock outputs can be overwritten individually by
+using a child node to the I2C device node. If a child node for a clock
+output is not set, the eeprom configuration is not overwritten.
+
+Required child node properties:
+- reg: number of clock output.
+
+Optional child node properties:
+- silabs,clock-source: source clock of the output divider stage N, shall be
+  0 = multisynth N
+  1 = multisynth 0 for output clocks 0-3, else multisynth4
+  2 = xtal
+  3 = clkin (si5351c only)
+- silabs,drive-strength: output drive strength in mA, shall be one of {2,4,6,8}.
+- silabs,multisynth-source: source pll A(0) or B(1) of corresponding multisynth
+  divider.
+- silabs,pll-master: boolean, multisynth can change pll frequency.
+
+==Example==
+
+/* 25MHz reference crystal */
+ref25: ref25M {
+	compatible = "fixed-clock";
+	#clock-cells = <0>;
+	clock-frequency = <25000000>;
+};
+
+i2c-master-node {
+
+	/* Si5351a msop10 i2c clock generator */
+	si5351a: clock-generator@60 {
+		compatible = "silabs,si5351a-msop";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#clock-cells = <1>;
+
+		/* connect xtal input to 25MHz reference */
+		clocks = <&ref25>;
+
+		/* connect xtal input as source of pll0 and pll1 */
+		silabs,pll-source = <0 0>, <1 0>;
+
+		/*
+		 * overwrite clkout0 configuration with:
+		 * - 8mA output drive strength
+		 * - pll0 as clock source of multisynth0
+		 * - multisynth0 as clock source of output divider
+		 * - multisynth0 can change pll0
+		 * - set initial clock frequency of 74.25MHz
+		 */
+		clkout0 {
+			reg = <0>;
+			silabs,drive-strength = <8>;
+			silabs,multisynth-source = <0>;
+			silabs,clock-source = <0>;
+			silabs,pll-master;
+			clock-frequency = <74250000>;
+		};
+
+		/*
+		 * overwrite clkout1 configuration with:
+		 * - 4mA output drive strength
+		 * - pll1 as clock source of multisynth1
+		 * - multisynth1 as clock source of output divider
+		 * - multisynth1 can change pll1
+		 */
+		clkout1 {
+			reg = <1>;
+			silabs,drive-strength = <4>;
+			silabs,multisynth-source = <1>;
+			silabs,clock-source = <0>;
+			pll-master;
+		};
+
+		/*
+		 * overwrite clkout2 configuration with:
+		 * - xtal as clock source of output divider
+		 */
+		clkout2 {
+			reg = <2>;
+			silabs,clock-source = <2>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 19e1ef7..ca60849 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -48,6 +48,7 @@ samsung	Samsung Semiconductor
 sbs	Smart Battery System
 schindler	Schindler
 sil	Silicon Image
+silabs	Silicon Laboratories
 simtek
 sirf	SiRF Technology, Inc.
 snps 	Synopsys, Inc.
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index a47e6ee..6412f55 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -55,6 +55,16 @@ config COMMON_CLK_MAX77686
 	---help---
 	  This driver supports Maxim 77686 crystal oscillator clock. 
 
+config COMMON_CLK_SI5351
+	tristate "Clock driver for SiLabs 5351A/B/C"
+	depends on I2C
+	depends on OF
+	select REGMAP_I2C
+	select RATIONAL
+	---help---
+	  This driver supports Silicon Labs 5351A/B/C programmable clock
+	  generators.
+
 config CLK_TWL6040
 	tristate "External McPDM functional clock from twl6040"
 	depends on TWL6040_CORE
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 300d477..92ca698 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -33,4 +33,5 @@ obj-$(CONFIG_X86)		+= x86/
 # Chip specific
 obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
 obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
+obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o
 obj-$(CONFIG_CLK_TWL6040)	+= clk-twl6040.o
diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c
new file mode 100644
index 0000000..9d0c210
--- /dev/null
+++ b/drivers/clk/clk-si5351.c
@@ -0,0 +1,1411 @@
+/*
+ * clk-si5351.c: Silicon Laboratories Si5351A/B/C I2C Clock Generator
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ * Rabeeh Khoury <rabeeh@solid-run.com>
+ *
+ * References:
+ * [1] "Si5351A/B/C Data Sheet"
+ *     http://www.silabs.com/Support%20Documents/TechnicalDocs/Si5351.pdf
+ * [2] "Manually Generating an Si5351 Register Map"
+ *     http://www.silabs.com/Support%20Documents/TechnicalDocs/AN619.pdf
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/clk-private.h>
+#include <linux/clkdev.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/rational.h>
+#include <linux/i2c.h>
+#include <linux/of_platform.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <asm/div64.h>
+
+#include "clk-si5351.h"
+
+enum si5351_variant {
+	SI5351_VARIANT_A = 1,
+	SI5351_VARIANT_A3 = 2,
+	SI5351_VARIANT_B = 3,
+	SI5351_VARIANT_C = 4,
+};
+
+struct si5351_driver_data;
+
+struct si5351_parameters {
+	unsigned long	p1;
+	unsigned long	p2;
+	unsigned long	p3;
+	int		valid;
+};
+
+struct si5351_hw_data {
+	struct clk_hw			hw;
+	struct si5351_driver_data	*drvdata;
+	struct si5351_parameters	params;
+	unsigned char			num;
+};
+
+struct si5351_driver_data {
+	enum si5351_variant	variant;
+	struct i2c_client	*client;
+	struct regmap		*regmap;
+	struct clk_onecell_data onecell;
+
+	struct clk		*pxtal;
+	struct clk_hw		xtal;
+	struct clk		*pclkin;
+	struct clk_hw		clkin;
+
+	struct si5351_hw_data	pll[2];
+	struct si5351_hw_data	*msynth;
+	struct si5351_hw_data	*clkout;
+};
+
+static const char const *si5351_input_names[] = {
+	"xtal", "clkin"
+};
+static const char const *si5351_pll_names[] = {
+	"plla", "pllb", "vxco"
+};
+static const char const *si5351_msynth_names[] = {
+	"ms0", "ms1", "ms2", "ms3", "ms4", "ms5", "ms6", "ms7"
+};
+static const char const *si5351_clkout_names[] = {
+	"clk0", "clk1", "clk2", "clk3", "clk4", "clk5", "clk6", "clk7"
+};
+
+/*
+ * Si5351 i2c regmap
+ */
+static inline unsigned char si5351_reg_read(struct si5351_driver_data *drvdata,
+	unsigned char reg)
+{
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(drvdata->regmap, reg, &val);
+	if (ret) {
+		dev_err(&drvdata->client->dev,
+			"unable to read from reg%02x\n", reg);
+		return 0;
+	}
+
+	return (unsigned char)val;
+}
+
+static inline int si5351_bulk_read(struct si5351_driver_data *drvdata,
+	unsigned char reg, unsigned char count, unsigned char *buf)
+{
+	return regmap_bulk_read(drvdata->regmap, reg, buf, count);
+}
+
+static inline int si5351_reg_write(struct si5351_driver_data *drvdata,
+	unsigned char reg, unsigned char val)
+{
+	return regmap_write(drvdata->regmap, reg, val);
+}
+
+static inline int si5351_bulk_write(struct si5351_driver_data *drvdata,
+	unsigned char reg, unsigned char count, const unsigned char *buf)
+{
+	return regmap_raw_write(drvdata->regmap, reg, buf, count);
+}
+
+static inline int si5351_set_bits(struct si5351_driver_data *drvdata,
+	unsigned char reg, unsigned char mask, unsigned char val)
+{
+	return regmap_update_bits(drvdata->regmap, reg, mask, val);
+}
+
+static inline unsigned char si5351_msynth_params_address(int num)
+{
+	if (num > 5)
+		return SI5351_CLK6_PARAMETERS + (num - 6);
+	return SI5351_CLK0_PARAMETERS + (SI5351_PARAMETERS_LENGTH * num);
+}
+
+static void si5351_read_parameters(struct si5351_driver_data *drvdata,
+	unsigned char reg, struct si5351_parameters *params)
+{
+	unsigned char buf[SI5351_PARAMETERS_LENGTH];
+
+	switch (reg) {
+	case SI5351_CLK6_PARAMETERS:
+	case SI5351_CLK7_PARAMETERS:
+		buf[0] = si5351_reg_read(drvdata, reg);
+		params->p1 = buf[0];
+		params->p2 = 0;
+		params->p3 = 1;
+		break;
+	default:
+		si5351_bulk_read(drvdata, reg, SI5351_PARAMETERS_LENGTH, buf);
+		params->p1 = ((buf[2] & 0x03) << 16) | (buf[3] << 8) | buf[4];
+		params->p2 = ((buf[5] & 0x0f) << 16) | (buf[6] << 8) | buf[7];
+		params->p3 = ((buf[5] & 0xf0) << 12) | (buf[0] << 8) | buf[1];
+	}
+	params->valid = 1;
+}
+
+static void si5351_write_parameters(struct si5351_driver_data *drvdata,
+	unsigned char reg, struct si5351_parameters *params)
+{
+	unsigned char buf[SI5351_PARAMETERS_LENGTH];
+
+	switch (reg) {
+	case SI5351_CLK6_PARAMETERS:
+	case SI5351_CLK7_PARAMETERS:
+		buf[0] = params->p1 & 0xff;
+		si5351_reg_write(drvdata, reg, buf[0]);
+		break;
+	default:
+		buf[0] = ((params->p3 & 0x0ff00) >> 8) & 0xff;
+		buf[1] = params->p3 & 0xff;
+		/* save rdiv and divby4 */
+		buf[2] = si5351_reg_read(drvdata, reg + 2) & ~0x03;
+		buf[2] |= ((params->p1 & 0x30000) >> 16) & 0x03;
+		buf[3] = ((params->p1 & 0x0ff00) >> 8) & 0xff;
+		buf[4] = params->p1 & 0xff;
+		buf[5] = ((params->p3 & 0xf0000) >> 12) |
+			((params->p2 & 0xf0000) >> 16);
+		buf[6] = ((params->p2 & 0x0ff00) >> 8) & 0xff;
+		buf[7] = params->p2 & 0xff;
+		si5351_bulk_write(drvdata, reg, SI5351_PARAMETERS_LENGTH, buf);
+	}
+}
+
+static bool si5351_regmap_is_volatile(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case SI5351_DEVICE_STATUS:
+	case SI5351_INTERRUPT_STATUS:
+	case SI5351_PLL_RESET:
+		return true;
+	}
+	return false;
+}
+
+static bool si5351_regmap_is_writeable(struct device *dev, unsigned int reg)
+{
+	/* reserved registers */
+	if (reg >= 4 && reg <= 8)
+		return false;
+	if (reg >= 10 && reg <= 14)
+		return false;
+	if (reg >= 173 && reg <= 176)
+		return false;
+	if (reg >= 178 && reg <= 182)
+		return false;
+	/* read-only */
+	if (reg == SI5351_DEVICE_STATUS)
+		return false;
+	return true;
+}
+
+static struct regmap_config si5351_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.cache_type = REGCACHE_RBTREE,
+	.max_register = 187,
+	.writeable_reg = si5351_regmap_is_writeable,
+	.volatile_reg = si5351_regmap_is_volatile,
+};
+
+/*
+ * Si5351 xtal clock input
+ */
+static int si5351_xtal_prepare(struct clk_hw *hw)
+{
+	struct si5351_driver_data *drvdata =
+		container_of(hw, struct si5351_driver_data, xtal);
+	si5351_set_bits(drvdata, SI5351_FANOUT_ENABLE,
+			SI5351_XTAL_ENABLE, SI5351_XTAL_ENABLE);
+	return 0;
+}
+
+static void si5351_xtal_unprepare(struct clk_hw *hw)
+{
+	struct si5351_driver_data *drvdata =
+		container_of(hw, struct si5351_driver_data, xtal);
+	si5351_set_bits(drvdata, SI5351_FANOUT_ENABLE,
+			SI5351_XTAL_ENABLE, 0);
+}
+
+static const struct clk_ops si5351_xtal_ops = {
+	.prepare = si5351_xtal_prepare,
+	.unprepare = si5351_xtal_unprepare,
+};
+
+/*
+ * Si5351 clkin clock input (Si5351C only)
+ */
+static int si5351_clkin_prepare(struct clk_hw *hw)
+{
+	struct si5351_driver_data *drvdata =
+		container_of(hw, struct si5351_driver_data, clkin);
+	si5351_set_bits(drvdata, SI5351_FANOUT_ENABLE,
+			SI5351_CLKIN_ENABLE, SI5351_CLKIN_ENABLE);
+	return 0;
+}
+
+static void si5351_clkin_unprepare(struct clk_hw *hw)
+{
+	struct si5351_driver_data *drvdata =
+		container_of(hw, struct si5351_driver_data, clkin);
+	si5351_set_bits(drvdata, SI5351_FANOUT_ENABLE,
+			SI5351_CLKIN_ENABLE, 0);
+}
+
+/*
+ * CMOS clock source constraints:
+ * The input frequency range of the PLL is 10Mhz to 40MHz.
+ * If CLKIN is >40MHz, the input divider must be used.
+ */
+static unsigned long si5351_clkin_recalc_rate(struct clk_hw *hw,
+					      unsigned long parent_rate)
+{
+	struct si5351_driver_data *drvdata =
+		container_of(hw, struct si5351_driver_data, clkin);
+	unsigned long rate;
+	unsigned char idiv;
+
+	rate = parent_rate;
+	if (parent_rate > 160000000) {
+		idiv = SI5351_CLKIN_DIV_8;
+		rate /= 8;
+	} else if (parent_rate > 80000000) {
+		idiv = SI5351_CLKIN_DIV_4;
+		rate /= 4;
+	} else if (parent_rate > 40000000) {
+		idiv = SI5351_CLKIN_DIV_2;
+		rate /= 2;
+	} else {
+		idiv = SI5351_CLKIN_DIV_1;
+	}
+
+	si5351_set_bits(drvdata, SI5351_PLL_INPUT_SOURCE,
+			SI5351_CLKIN_DIV_MASK, idiv);
+
+	dev_dbg(&drvdata->client->dev, "%s - clkin div = %d, rate = %lu\n",
+		__func__, (1 << (idiv >> 6)), rate);
+
+	return rate;
+}
+
+static const struct clk_ops si5351_clkin_ops = {
+	.prepare = si5351_clkin_prepare,
+	.unprepare = si5351_clkin_unprepare,
+	.recalc_rate = si5351_clkin_recalc_rate,
+};
+
+/*
+ * Si5351 vxco clock input (Si5351B only)
+ */
+
+static int si5351_vxco_prepare(struct clk_hw *hw)
+{
+	struct si5351_hw_data *hwdata =
+		container_of(hw, struct si5351_hw_data, hw);
+
+	dev_warn(&hwdata->drvdata->client->dev, "VXCO currently unsupported\n");
+
+	return 0;
+}
+
+static void si5351_vxco_unprepare(struct clk_hw *hw)
+{
+}
+
+static unsigned long si5351_vxco_recalc_rate(struct clk_hw *hw,
+					     unsigned long parent_rate)
+{
+	return 0;
+}
+
+static int si5351_vxco_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent)
+{
+	return 0;
+}
+
+static const struct clk_ops si5351_vxco_ops = {
+	.prepare = si5351_vxco_prepare,
+	.unprepare = si5351_vxco_unprepare,
+	.recalc_rate = si5351_vxco_recalc_rate,
+	.set_rate = si5351_vxco_set_rate,
+};
+
+/*
+ * Si5351 pll a/b
+ *
+ * Feedback Multisynth Divider Equations [2]
+ *
+ * fVCO = fIN * (a + b/c)
+ *
+ * with 15 + 0/1048575 <= (a + b/c) <= 90 + 0/1048575 and
+ * fIN = fXTAL or fIN = fCLKIN/CLKIN_DIV
+ *
+ * Feedback Multisynth Register Equations
+ *
+ * (1) MSNx_P1[17:0] = 128 * a + floor(128 * b/c) - 512
+ * (2) MSNx_P2[19:0] = 128 * b - c * floor(128 * b/c) = (128*b) mod c
+ * (3) MSNx_P3[19:0] = c
+ *
+ * Transposing (2) yields: (4) floor(128 * b/c) = (128 * b / MSNx_P2)/c
+ *
+ * Using (4) on (1) yields:
+ * MSNx_P1 = 128 * a + (128 * b/MSNx_P2)/c - 512
+ * MSNx_P1 + 512 + MSNx_P2/c = 128 * a + 128 * b/c
+ *
+ * a + b/c = (MSNx_P1 + MSNx_P2/MSNx_P3 + 512)/128
+ *         = (MSNx_P1*MSNx_P3 + MSNx_P2 + 512*MSNx_P3)/(128*MSNx_P3)
+ *
+ */
+static inline int _si5351_pll_reparent(struct si5351_driver_data *drvdata,
+				       unsigned char num, unsigned char parent)
+{
+	if (num > 2 ||
+	    (drvdata->variant == SI5351_VARIANT_B && num > 1))
+		return -EINVAL;
+
+	if (drvdata->variant != SI5351_VARIANT_C && parent > 0)
+		return -EINVAL;
+
+	return clk_set_parent(drvdata->pll[num].hw.clk, (parent) ?
+			      drvdata->clkin.clk : drvdata->xtal.clk);
+}
+
+static unsigned char si5351_pll_get_parent(struct clk_hw *hw)
+{
+	struct si5351_hw_data *hwdata =
+		container_of(hw, struct si5351_hw_data, hw);
+	unsigned char mask = (hwdata->num == 0) ?
+		SI5351_PLLA_SOURCE : SI5351_PLLB_SOURCE;
+	unsigned char val;
+
+	val = si5351_reg_read(hwdata->drvdata, SI5351_PLL_INPUT_SOURCE);
+
+	return (val & mask) ? 1 : 0;
+}
+
+static int si5351_pll_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct si5351_hw_data *hwdata =
+		container_of(hw, struct si5351_hw_data, hw);
+	unsigned char mask = (hwdata->num == 0) ?
+		SI5351_PLLA_SOURCE : SI5351_PLLB_SOURCE;
+
+	if (hwdata->drvdata->variant != SI5351_VARIANT_C &&
+	    index > 0)
+		return -EPERM;
+
+	if (index > 1)
+		return -EINVAL;
+
+	si5351_set_bits(hwdata->drvdata, SI5351_PLL_INPUT_SOURCE,
+			mask, (index) ? 0 : mask);
+
+	return 0;
+}
+
+static unsigned long si5351_pll_recalc_rate(struct clk_hw *hw,
+					    unsigned long parent_rate)
+{
+	struct si5351_hw_data *hwdata =
+		container_of(hw, struct si5351_hw_data, hw);
+	unsigned char reg = (hwdata->num == 0) ?
+		SI5351_PLLA_PARAMETERS : SI5351_PLLB_PARAMETERS;
+	unsigned long long rate;
+
+	if (!hwdata->params.valid)
+		si5351_read_parameters(hwdata->drvdata, reg, &hwdata->params);
+
+	if (hwdata->params.p3 == 0)
+		return parent_rate;
+
+	/* fVCO = fIN * (P1*P3 + 512*P3 + P2)/(128*P3) */
+	rate  = hwdata->params.p1 * hwdata->params.p3;
+	rate += 512 * hwdata->params.p3;
+	rate += hwdata->params.p2;
+	rate *= parent_rate;
+	do_div(rate, 128 * hwdata->params.p3);
+
+	dev_dbg(&hwdata->drvdata->client->dev,
+		"%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, parent_rate = %lu, rate = %lu\n",
+		__func__, hwdata->hw.clk->name,
+		hwdata->params.p1, hwdata->params.p2, hwdata->params.p3,
+		parent_rate, (unsigned long)rate);
+
+	return (unsigned long)rate;
+}
+
+static long si5351_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+				  unsigned long *parent_rate)
+{
+	struct si5351_hw_data *hwdata =
+		container_of(hw, struct si5351_hw_data, hw);
+	unsigned long rfrac, denom, a, b, c;
+	unsigned long long lltmp;
+
+	if (rate < SI5351_PLL_VCO_MIN)
+		rate = SI5351_PLL_VCO_MIN;
+	if (rate > SI5351_PLL_VCO_MAX)
+		rate = SI5351_PLL_VCO_MAX;
+
+	/* determine integer part of feedback equation */
+	a = rate / *parent_rate;
+
+	if (a < SI5351_PLL_A_MIN)
+		rate = *parent_rate * SI5351_PLL_A_MIN;
+	if (a > SI5351_PLL_A_MAX)
+		rate = *parent_rate * SI5351_PLL_A_MAX;
+
+	/* find best approximation for b/c = fVCO mod fIN */
+	denom = 1000 * 1000;
+	lltmp = rate % (*parent_rate);
+	lltmp *= denom;
+	do_div(lltmp, *parent_rate);
+	rfrac = (unsigned long)lltmp;
+
+	b = 0;
+	c = 1;
+	if (rfrac)
+		rational_best_approximation(rfrac, denom,
+				    SI5351_PLL_B_MAX, SI5351_PLL_C_MAX, &b, &c);
+
+	/* calculate parameters */
+	hwdata->params.p3  = c;
+	hwdata->params.p2  = (128 * b) % c;
+	hwdata->params.p1  = 128 * a;
+	hwdata->params.p1 += (128 * b / c);
+	hwdata->params.p1 -= 512;
+
+	/* recalculate rate by fIN * (a + b/c) */
+	lltmp  = *parent_rate;
+	lltmp *= b;
+	do_div(lltmp, c);
+
+	rate  = (unsigned long)lltmp;
+	rate += *parent_rate * a;
+
+	dev_dbg(&hwdata->drvdata->client->dev,
+		"%s - %s: a = %lu, b = %lu, c = %lu, parent_rate = %lu, rate = %lu\n",
+		__func__, hwdata->hw.clk->name, a, b, c, *parent_rate, rate);
+
+	return rate;
+}
+
+static int si5351_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long parent_rate)
+{
+	struct si5351_hw_data *hwdata =
+		container_of(hw, struct si5351_hw_data, hw);
+	unsigned char reg = (hwdata->num == 0) ?
+		SI5351_PLLA_PARAMETERS : SI5351_PLLB_PARAMETERS;
+	unsigned char val;
+
+	/* write multisynth parameters */
+	si5351_write_parameters(hwdata->drvdata, reg, &hwdata->params);
+
+	/* plla/pllb ctrl is in clk6/clk7 ctrl registers */
+	si5351_set_bits(hwdata->drvdata, SI5351_CLK6_CTRL + hwdata->num,
+		SI5351_CLK_INTEGER_MODE,
+		(hwdata->params.p2 == 0) ? SI5351_CLK_INTEGER_MODE : 0);
+
+	/* reset pll */
+	val = (hwdata->num == 0) ? SI5351_PLL_RESET_A : SI5351_PLL_RESET_B;
+	si5351_set_bits(hwdata->drvdata, SI5351_PLL_RESET, val, val);
+
+	dev_dbg(&hwdata->drvdata->client->dev,
+		"%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, parent_rate = %lu, rate = %lu\n",
+		__func__, hwdata->hw.clk->name,
+		hwdata->params.p1, hwdata->params.p2, hwdata->params.p3,
+		parent_rate, rate);
+
+	return 0;
+}
+
+static const struct clk_ops si5351_pll_ops = {
+	.set_parent = si5351_pll_set_parent,
+	.get_parent = si5351_pll_get_parent,
+	.recalc_rate = si5351_pll_recalc_rate,
+	.round_rate = si5351_pll_round_rate,
+	.set_rate = si5351_pll_set_rate,
+};
+
+/*
+ * Si5351 multisync divider
+ *
+ * for fOUT <= 150 MHz:
+ *
+ * fOUT = (fIN * (a + b/c)) / CLKOUTDIV
+ *
+ * with 6 + 0/1048575 <= (a + b/c) <= 1800 + 0/1048575 and
+ * fIN = fVCO0, fVCO1, fXTAL or fCLKIN/CLKIN_DIV
+ *
+ * Output Clock Multisynth Register Equations
+ *
+ * MSx_P1[17:0] = 128 * a + floor(128 * b/c) - 512
+ * MSx_P2[19:0] = 128 * b - c * floor(128 * b/c) = (128*b) mod c
+ * MSx_P3[19:0] = c
+ *
+ * MS[6,7] are integer (P1) divide only, P2 = 0, P3 = 0
+ *
+ * for 150MHz < fOUT <= 160MHz:
+ *
+ * MSx_P1 = 0, MSx_P2 = 0, MSx_P3 = 1, MSx_INT = 1, MSx_DIVBY4 = 11b
+ */
+static inline void _si5351_msynth_set_pll_master(
+	struct si5351_driver_data *drvdata, unsigned char num, int is_master)
+{
+	if (num > 8 ||
+	    (drvdata->variant == SI5351_VARIANT_A3 && num > 3))
+		return;
+
+	if (is_master)
+		drvdata->msynth[num].hw.clk->flags |= CLK_SET_RATE_PARENT;
+	else
+		drvdata->msynth[num].hw.clk->flags &= ~CLK_SET_RATE_PARENT;
+}
+
+static inline int _si5351_msynth_reparent(struct si5351_driver_data *drvdata,
+				  unsigned char num, unsigned char parent)
+{
+	if (parent > 2)
+		return -EINVAL;
+
+	if (num > 8 ||
+	    (drvdata->variant == SI5351_VARIANT_A3 && num > 3))
+		return -EINVAL;
+
+	return clk_set_parent(drvdata->msynth[num].hw.clk,
+			      drvdata->pll[parent].hw.clk);
+}
+
+static unsigned char si5351_msynth_get_parent(struct clk_hw *hw)
+{
+	struct si5351_hw_data *hwdata =
+		container_of(hw, struct si5351_hw_data, hw);
+	unsigned char val;
+
+	val = si5351_reg_read(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num);
+
+	return (val & SI5351_CLK_PLL_SELECT) ? 1 : 0;
+}
+
+static int si5351_msynth_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct si5351_hw_data *hwdata =
+		container_of(hw, struct si5351_hw_data, hw);
+
+	si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num,
+			SI5351_CLK_PLL_SELECT,
+			(index) ? SI5351_CLK_PLL_SELECT : 0);
+
+	return 0;
+}
+
+static unsigned long si5351_msynth_recalc_rate(struct clk_hw *hw,
+					       unsigned long parent_rate)
+{
+	struct si5351_hw_data *hwdata =
+		container_of(hw, struct si5351_hw_data, hw);
+	unsigned char reg = si5351_msynth_params_address(hwdata->num);
+	unsigned long long rate;
+	unsigned long m;
+
+	if (!hwdata->params.valid)
+		si5351_read_parameters(hwdata->drvdata, reg, &hwdata->params);
+
+	if (hwdata->params.p3 == 0)
+		return parent_rate;
+
+	/*
+	 * multisync0-5: fOUT = (128 * P3 * fIN) / (P1*P3 + P2 + 512*P3)
+	 * multisync6-7: fOUT = fIN / P1
+	 */
+	rate = parent_rate;
+	if (hwdata->num > 5) {
+		m = hwdata->params.p1;
+	} else if ((si5351_reg_read(hwdata->drvdata, reg + 2) &
+		    SI5351_OUTPUT_CLK_DIVBY4) == SI5351_OUTPUT_CLK_DIVBY4) {
+		m = 4;
+	} else {
+		rate *= 128 * hwdata->params.p3;
+		m = hwdata->params.p1 * hwdata->params.p3;
+		m += hwdata->params.p2;
+		m += 512 * hwdata->params.p3;
+	}
+
+	if (m == 0)
+		return 0;
+	do_div(rate, m);
+
+	dev_dbg(&hwdata->drvdata->client->dev,
+		"%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, m = %lu, parent_rate = %lu, rate = %lu\n",
+		__func__, hwdata->hw.clk->name,
+		hwdata->params.p1, hwdata->params.p2, hwdata->params.p3,
+		m, parent_rate, (unsigned long)rate);
+
+	return (unsigned long)rate;
+}
+
+static long si5351_msynth_round_rate(struct clk_hw *hw, unsigned long rate,
+				     unsigned long *parent_rate)
+{
+	struct si5351_hw_data *hwdata =
+		container_of(hw, struct si5351_hw_data, hw);
+	unsigned long long lltmp;
+	unsigned long a, b, c;
+	int divby4;
+
+	/* multisync6-7 can only handle freqencies < 150MHz */
+	if (hwdata->num >= 6 && rate > SI5351_MULTISYNTH67_MAX_FREQ)
+		rate = SI5351_MULTISYNTH67_MAX_FREQ;
+
+	/* multisync frequency is 1MHz .. 160MHz */
+	if (rate > SI5351_MULTISYNTH_MAX_FREQ)
+		rate = SI5351_MULTISYNTH_MAX_FREQ;
+	if (rate < SI5351_MULTISYNTH_MIN_FREQ)
+		rate = SI5351_MULTISYNTH_MIN_FREQ;
+
+	divby4 = 0;
+	if (rate > SI5351_MULTISYNTH_DIVBY4_FREQ)
+		divby4 = 1;
+
+	/* multisync can set pll */
+	if (hwdata->hw.clk->flags & CLK_SET_RATE_PARENT) {
+		/*
+		 * find largest integer divider for max
+		 * vco frequency and given target rate
+		 */
+		if (divby4 == 0) {
+			lltmp = SI5351_PLL_VCO_MAX;
+			do_div(lltmp, rate);
+			a = (unsigned long)lltmp;
+		} else
+			a = 4;
+
+		b = 0;
+		c = 1;
+
+		*parent_rate = a * rate;
+	} else {
+		unsigned long rfrac, denom;
+
+		/* disable divby4 */
+		if (divby4) {
+			rate = SI5351_MULTISYNTH_DIVBY4_FREQ;
+			divby4 = 0;
+		}
+
+		/* determine integer part of divider equation */
+		a = *parent_rate / rate;
+		if (a < SI5351_MULTISYNTH_A_MIN)
+			a = SI5351_MULTISYNTH_A_MIN;
+		if (hwdata->num >= 6 && a > SI5351_MULTISYNTH67_A_MAX)
+			a = SI5351_MULTISYNTH67_A_MAX;
+		else if (a > SI5351_MULTISYNTH_A_MAX)
+			a = SI5351_MULTISYNTH_A_MAX;
+
+		/* find best approximation for b/c = fVCO mod fOUT */
+		denom = 1000 * 1000;
+		lltmp = (*parent_rate) % rate;
+		lltmp *= denom;
+		do_div(lltmp, rate);
+		rfrac = (unsigned long)lltmp;
+
+		b = 0;
+		c = 1;
+		if (rfrac)
+			rational_best_approximation(rfrac, denom,
+			    SI5351_MULTISYNTH_B_MAX, SI5351_MULTISYNTH_C_MAX,
+			    &b, &c);
+	}
+
+	/* recalculate rate by fOUT = fIN / (a + b/c) */
+	lltmp  = *parent_rate;
+	lltmp *= c;
+	do_div(lltmp, a * c + b);
+	rate  = (unsigned long)lltmp;
+
+	/* calculate parameters */
+	if (divby4) {
+		hwdata->params.p3 = 1;
+		hwdata->params.p2 = 0;
+		hwdata->params.p1 = 0;
+	} else {
+		hwdata->params.p3  = c;
+		hwdata->params.p2  = (128 * b) % c;
+		hwdata->params.p1  = 128 * a;
+		hwdata->params.p1 += (128 * b / c);
+		hwdata->params.p1 -= 512;
+	}
+
+	dev_dbg(&hwdata->drvdata->client->dev,
+		"%s - %s: a = %lu, b = %lu, c = %lu, divby4 = %d, parent_rate = %lu, rate = %lu\n",
+		__func__, hwdata->hw.clk->name, a, b, c, divby4, *parent_rate,
+		rate);
+
+	return rate;
+}
+
+static int si5351_msynth_set_rate(struct clk_hw *hw, unsigned long rate,
+				  unsigned long parent_rate)
+{
+	struct si5351_hw_data *hwdata =
+		container_of(hw, struct si5351_hw_data, hw);
+	unsigned char reg = si5351_msynth_params_address(hwdata->num);
+	int divby4 = 0;
+
+	/* write multisynth parameters */
+	si5351_write_parameters(hwdata->drvdata, reg, &hwdata->params);
+
+	if (rate > SI5351_MULTISYNTH_DIVBY4_FREQ)
+		divby4 = 1;
+
+	/* enable/disable integer mode and divby4 on multisynth0-5 */
+	if (hwdata->num < 6) {
+		si5351_set_bits(hwdata->drvdata, reg + 2,
+				SI5351_OUTPUT_CLK_DIVBY4,
+				(divby4) ? SI5351_OUTPUT_CLK_DIVBY4 : 0);
+		si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num,
+			SI5351_CLK_INTEGER_MODE,
+			(hwdata->params.p2 == 0) ? SI5351_CLK_INTEGER_MODE : 0);
+	}
+
+	dev_dbg(&hwdata->drvdata->client->dev,
+		"%s - %s: p1 = %lu, p2 = %lu, p3 = %lu, divby4 = %d, parent_rate = %lu, rate = %lu\n",
+		__func__, hwdata->hw.clk->name,
+		hwdata->params.p1, hwdata->params.p2, hwdata->params.p3,
+		divby4, parent_rate, rate);
+
+	return 0;
+}
+
+static const struct clk_ops si5351_msynth_ops = {
+	.set_parent = si5351_msynth_set_parent,
+	.get_parent = si5351_msynth_get_parent,
+	.recalc_rate = si5351_msynth_recalc_rate,
+	.round_rate = si5351_msynth_round_rate,
+	.set_rate = si5351_msynth_set_rate,
+};
+
+/*
+ * Si5351 clkout divider
+ */
+static int _si5351_clkout_set_drive_strength(struct si5351_driver_data *drvdata,
+				     unsigned char num, unsigned char drive)
+{
+	if (num > 8 ||
+	    (drvdata->variant == SI5351_VARIANT_A3 && num > 3))
+		return -EINVAL;
+
+	switch (drive) {
+	case 2:
+		drive = SI5351_CLK_DRIVE_2MA;
+		break;
+	case 4:
+		drive = SI5351_CLK_DRIVE_4MA;
+		break;
+	case 6:
+		drive = SI5351_CLK_DRIVE_6MA;
+		break;
+	case 8:
+		drive = SI5351_CLK_DRIVE_8MA;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	si5351_set_bits(drvdata, SI5351_CLK0_CTRL + num,
+			SI5351_CLK_DRIVE_MASK, drive);
+
+	return 0;
+}
+
+static inline int _si5351_clkout_reparent(struct si5351_driver_data *drvdata,
+				  unsigned char num, unsigned char parent)
+{
+	struct clk *pclk;
+
+	if (num > 8 ||
+	    (drvdata->variant == SI5351_VARIANT_A3 && num > 3))
+		return -EINVAL;
+
+	drvdata->clkout[num].hw.clk->flags &= ~CLK_SET_RATE_PARENT;
+	switch (parent) {
+	case 0:
+		pclk = drvdata->msynth[num].hw.clk;
+		drvdata->clkout[num].hw.clk->flags |= CLK_SET_RATE_PARENT;
+		break;
+	case 1:
+		pclk = drvdata->msynth[0].hw.clk;
+		if (num >= 4)
+			pclk = drvdata->msynth[4].hw.clk;
+		break;
+	case 2:
+		pclk = drvdata->xtal.clk;
+		break;
+	case 3:
+		if (drvdata->variant != SI5351_VARIANT_C)
+			return -EINVAL;
+		pclk = drvdata->clkin.clk;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return clk_set_parent(drvdata->clkout[num].hw.clk, pclk);
+}
+
+static int si5351_clkout_prepare(struct clk_hw *hw)
+{
+	struct si5351_hw_data *hwdata =
+		container_of(hw, struct si5351_hw_data, hw);
+
+	si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num,
+			SI5351_CLK_POWERDOWN, 0);
+	si5351_set_bits(hwdata->drvdata, SI5351_OUTPUT_ENABLE_CTRL,
+			(1 << hwdata->num), 0);
+	return 0;
+}
+
+static void si5351_clkout_unprepare(struct clk_hw *hw)
+{
+	struct si5351_hw_data *hwdata =
+		container_of(hw, struct si5351_hw_data, hw);
+
+	si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num,
+			SI5351_CLK_POWERDOWN, SI5351_CLK_POWERDOWN);
+	si5351_set_bits(hwdata->drvdata, SI5351_OUTPUT_ENABLE_CTRL,
+			(1 << hwdata->num), (1 << hwdata->num));
+}
+
+static u8 si5351_clkout_get_parent(struct clk_hw *hw)
+{
+	struct si5351_hw_data *hwdata =
+		container_of(hw, struct si5351_hw_data, hw);
+	int index = 0;
+	unsigned char val;
+
+	val = si5351_reg_read(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num);
+	switch (val & SI5351_CLK_INPUT_MASK) {
+	case SI5351_CLK_INPUT_MULTISYNTH_N:
+		index = 0;
+		break;
+	case SI5351_CLK_INPUT_MULTISYNTH_0_4:
+		index = 1;
+		break;
+	case SI5351_CLK_INPUT_XTAL:
+		index = 2;
+		break;
+	case SI5351_CLK_INPUT_CLKIN:
+		index = 3;
+		break;
+	}
+
+	return index;
+}
+
+static int si5351_clkout_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct si5351_hw_data *hwdata =
+		container_of(hw, struct si5351_hw_data, hw);
+	unsigned val;
+
+	val = 0;
+	hw->clk->flags &= ~CLK_SET_RATE_PARENT;
+	switch (index) {
+	case 0:
+		hw->clk->flags |= CLK_SET_RATE_PARENT;
+		val = SI5351_CLK_INPUT_MULTISYNTH_N;
+		break;
+	case 1:
+		/* clk0/clk4 can only connect to its own multisync */
+		if (hwdata->num == 0 || hwdata->num == 4)
+			val = SI5351_CLK_INPUT_MULTISYNTH_N;
+		else
+			val = SI5351_CLK_INPUT_MULTISYNTH_0_4;
+		break;
+	case 2:
+		val = SI5351_CLK_INPUT_XTAL;
+		break;
+	case 3:
+		val = SI5351_CLK_INPUT_CLKIN;
+		break;
+	}
+	si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num,
+			SI5351_CLK_INPUT_MASK, val);
+
+	return 0;
+}
+
+static unsigned long si5351_clkout_recalc_rate(struct clk_hw *hw,
+					       unsigned long parent_rate)
+{
+	struct si5351_hw_data *hwdata =
+		container_of(hw, struct si5351_hw_data, hw);
+	unsigned char reg;
+	unsigned char rdiv;
+
+	if (hwdata->num > 5)
+		reg = si5351_msynth_params_address(hwdata->num) + 2;
+	else
+		reg = SI5351_CLK6_7_OUTPUT_DIVIDER;
+
+	rdiv = si5351_reg_read(hwdata->drvdata, reg);
+	if (hwdata->num == 6) {
+		rdiv &= SI5351_OUTPUT_CLK6_DIV_MASK;
+	} else {
+		rdiv &= SI5351_OUTPUT_CLK_DIV_MASK;
+		rdiv >>= SI5351_OUTPUT_CLK_DIV_SHIFT;
+	}
+
+	return parent_rate >> rdiv;
+}
+
+static long si5351_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
+				     unsigned long *parent_rate)
+{
+	struct si5351_hw_data *hwdata =
+		container_of(hw, struct si5351_hw_data, hw);
+	unsigned char rdiv;
+
+	/* clkout6/7 can only handle output freqencies < 150MHz */
+	if (hwdata->num >= 6 && rate > SI5351_CLKOUT67_MAX_FREQ)
+		rate = SI5351_CLKOUT67_MAX_FREQ;
+
+	/* clkout freqency is 8kHz - 160MHz */
+	if (rate > SI5351_CLKOUT_MAX_FREQ)
+		rate = SI5351_CLKOUT_MAX_FREQ;
+	if (rate < SI5351_CLKOUT_MIN_FREQ)
+		rate = SI5351_CLKOUT_MIN_FREQ;
+
+	/* request frequency if multisync master */
+	if (hwdata->hw.clk->flags & CLK_SET_RATE_PARENT) {
+		/* use r divider for frequencies below 1MHz */
+		rdiv = SI5351_OUTPUT_CLK_DIV_1;
+		while (rate < SI5351_MULTISYNTH_MIN_FREQ &&
+		       rdiv < SI5351_OUTPUT_CLK_DIV_128) {
+			rdiv += 1;
+			rate *= 2;
+		}
+		*parent_rate = rate;
+	} else {
+		unsigned long new_rate, new_err, err;
+
+		/* round to closed rdiv */
+		rdiv = SI5351_OUTPUT_CLK_DIV_1;
+		new_rate = *parent_rate;
+		err = abs(new_rate - rate);
+		do {
+			new_rate >>= 1;
+			new_err = abs(new_rate - rate);
+			if (new_err > err || rdiv == SI5351_OUTPUT_CLK_DIV_128)
+				break;
+			rdiv++;
+			err = new_err;
+		} while (1);
+	}
+	rate = *parent_rate >> rdiv;
+
+	dev_dbg(&hwdata->drvdata->client->dev,
+		"%s - %s: rdiv = %u, parent_rate = %lu, rate = %lu\n",
+		__func__, hwdata->hw.clk->name, (1 << rdiv), *parent_rate,
+		rate);
+
+	return rate;
+}
+
+static int si5351_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
+				  unsigned long parent_rate)
+{
+	struct si5351_hw_data *hwdata =
+		container_of(hw, struct si5351_hw_data, hw);
+	unsigned long new_rate, new_err, err;
+	unsigned char rdiv;
+
+	/* round to closed rdiv */
+	rdiv = SI5351_OUTPUT_CLK_DIV_1;
+	new_rate = parent_rate;
+	err = abs(new_rate - rate);
+	do {
+		new_rate >>= 1;
+		new_err = abs(new_rate - rate);
+		if (new_err > err || rdiv == SI5351_OUTPUT_CLK_DIV_128)
+			break;
+		rdiv++;
+		err = new_err;
+	} while (1);
+
+	/* powerdown clkout */
+	si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num,
+			SI5351_CLK_POWERDOWN, SI5351_CLK_POWERDOWN);
+
+	/* write output divider */
+	switch (hwdata->num) {
+	case 6:
+		si5351_set_bits(hwdata->drvdata, SI5351_CLK6_7_OUTPUT_DIVIDER,
+				SI5351_OUTPUT_CLK6_DIV_MASK, rdiv);
+		break;
+	case 7:
+		si5351_set_bits(hwdata->drvdata, SI5351_CLK6_7_OUTPUT_DIVIDER,
+				SI5351_OUTPUT_CLK_DIV_MASK,
+				rdiv << SI5351_OUTPUT_CLK_DIV_SHIFT);
+		break;
+	default:
+		si5351_set_bits(hwdata->drvdata,
+				si5351_msynth_params_address(hwdata->num) + 2,
+				SI5351_OUTPUT_CLK_DIV_MASK,
+				rdiv << SI5351_OUTPUT_CLK_DIV_SHIFT);
+	}
+
+	/* powerup clkout */
+	si5351_set_bits(hwdata->drvdata, SI5351_CLK0_CTRL + hwdata->num,
+			SI5351_CLK_POWERDOWN, 0);
+
+	dev_dbg(&hwdata->drvdata->client->dev,
+		"%s - %s: rdiv = %u, parent_rate = %lu, rate = %lu\n",
+		__func__, hwdata->hw.clk->name, (1 << rdiv), parent_rate, rate);
+
+	return 0;
+}
+
+static const struct clk_ops si5351_clkout_ops = {
+	.prepare = si5351_clkout_prepare,
+	.unprepare = si5351_clkout_unprepare,
+	.set_parent = si5351_clkout_set_parent,
+	.get_parent = si5351_clkout_get_parent,
+	.recalc_rate = si5351_clkout_recalc_rate,
+	.round_rate = si5351_clkout_round_rate,
+	.set_rate = si5351_clkout_set_rate,
+};
+
+/*
+ * Si5351 i2c probe and DT
+ */
+static void si5351_dt_setup(
+	struct i2c_client *client, struct si5351_driver_data *drvdata)
+{
+	struct device_node *np = client->dev.of_node;
+	struct property *prop;
+	const __be32 *p;
+	unsigned int num, val;
+
+	if (np == NULL)
+		return;
+
+	/*
+	 * property silabs,pll-source : <num src>, [<..>]
+	 * allow to selectively set pll source
+	 */
+	of_property_for_each_u32(client->dev.of_node, "silabs,pll-source",
+				 prop, p, num) {
+		if (num >= 2) {
+			dev_err(&client->dev,
+				"invalid pll %d on pll-source prop\n", num);
+			break;
+		}
+
+		p = of_prop_next_u32(prop, p, &val);
+		if (!p)
+			break;
+
+		if (_si5351_pll_reparent(drvdata, num, val))
+			dev_warn(&client->dev,
+				 "unable to reparent pll %d to %d\n",
+				 num, val);
+	}
+
+	for_each_child_of_node(client->dev.of_node, np) {
+		if (of_property_read_u32(np, "reg", &num)) {
+			dev_err(&client->dev, "missing reg property of %s\n",
+				np->full_name);
+			continue;
+		}
+
+		if (of_property_read_bool(np, "silabs,pll-master"))
+			_si5351_msynth_set_pll_master(drvdata, num, 1);
+
+		if (!of_property_read_u32(np, "silabs,drive-strength", &val)) {
+			if (_si5351_clkout_set_drive_strength(drvdata,
+							      num, val))
+				dev_warn(&client->dev,
+					 "unable to set drive strength of %d to %d\n",
+					 num, val);
+		}
+
+		if (!of_property_read_u32(np, "silabs,multisynth-source",
+					  &val)) {
+			if (_si5351_msynth_reparent(drvdata, num, val))
+				dev_warn(&client->dev,
+					 "unable to reparent multisynth %d to %d\n",
+					 num, val);
+		}
+
+		if (!of_property_read_u32(np, "silabs,clock-source", &val)) {
+			if (_si5351_clkout_reparent(drvdata, num, val))
+				dev_warn(&client->dev,
+					 "unable to reparent clockout %d to %d\n",
+					 num, val);
+		}
+
+		if (!of_property_read_u32(np, "clock-frequency", &val))
+			clk_set_rate(drvdata->onecell.clks[num], val);
+	}
+}
+
+static const struct of_device_id si5351_dt_ids[] = {
+	{ .compatible = "silabs,si5351a", .data = (void *)SI5351_VARIANT_A, },
+	{ .compatible = "silabs,si5351a-msop",
+					 .data = (void *)SI5351_VARIANT_A3, },
+	{ .compatible = "silabs,si5351b", .data = (void *)SI5351_VARIANT_B, },
+	{ .compatible = "silabs,si5351c", .data = (void *)SI5351_VARIANT_C, },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, si5351_dt_ids);
+
+static int si5351_dt_parse(
+	struct i2c_client *client, struct si5351_driver_data *drvdata)
+{
+	struct device_node *np = client->dev.of_node;
+	const struct of_device_id *match;
+
+	if (np == NULL)
+		return -EINVAL;
+
+	match = of_match_node(si5351_dt_ids, np);
+	if (match == NULL)
+		return -EINVAL;
+
+	drvdata->variant = (enum si5351_variant)match->data;
+	drvdata->pxtal = of_clk_get(np, 0);
+	drvdata->pclkin = of_clk_get(np, 1);
+
+	return 0;
+}
+
+static int si5351_i2c_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	struct si5351_driver_data *drvdata;
+	struct clk_init_data init;
+	struct clk *clk;
+	const char *parent_names[4];
+	u8 num_parents, num_clocks;
+	int ret, n;
+
+	drvdata = devm_kzalloc(&client->dev, sizeof(*drvdata), GFP_KERNEL);
+	if (drvdata == NULL) {
+		dev_err(&client->dev, "unable to allocate driver data\n");
+		return -ENOMEM;
+	}
+
+	ret = si5351_dt_parse(client, drvdata);
+	if (ret)
+		return ret;
+
+	i2c_set_clientdata(client, drvdata);
+	drvdata->client = client;
+	drvdata->regmap = devm_regmap_init_i2c(client, &si5351_regmap_config);
+	if (IS_ERR(drvdata->regmap)) {
+		dev_err(&client->dev, "failed to allocate register map\n");
+		return PTR_ERR(drvdata->regmap);
+	}
+
+	/* Disable interrupts */
+	si5351_reg_write(drvdata, SI5351_INTERRUPT_MASK, 0xf0);
+	/* Set disabled output drivers to drive low */
+	si5351_reg_write(drvdata, SI5351_CLK3_0_DISABLE_STATE, 0x00);
+	si5351_reg_write(drvdata, SI5351_CLK7_4_DISABLE_STATE, 0x00);
+	/* Ensure pll select is on XTAL for Si5351A/B */
+	if (drvdata->variant != SI5351_VARIANT_C)
+		si5351_set_bits(drvdata, SI5351_PLL_INPUT_SOURCE,
+				SI5351_PLLA_SOURCE | SI5351_PLLB_SOURCE, 0);
+
+	/* register xtal input clock gate */
+	memset(&init, 0, sizeof(init));
+	init.name = si5351_input_names[0];
+	init.ops = &si5351_xtal_ops;
+	init.flags = 0;
+	if (!IS_ERR(drvdata->pxtal)) {
+		init.parent_names = &drvdata->pxtal->name;
+		init.num_parents = 1;
+	}
+	drvdata->xtal.init = &init;
+	clk = devm_clk_register(&client->dev, &drvdata->xtal);
+	if (IS_ERR(clk)) {
+		dev_err(&client->dev, "unable to register %s\n", init.name);
+		return PTR_ERR(clk);
+	}
+
+	/* register clkin input clock gate */
+	if (drvdata->variant == SI5351_VARIANT_C) {
+		memset(&init, 0, sizeof(init));
+		init.name = si5351_input_names[1];
+		init.ops = &si5351_clkin_ops;
+		if (!IS_ERR(drvdata->pclkin)) {
+			init.parent_names = &drvdata->pclkin->name;
+			init.num_parents = 1;
+		}
+		drvdata->clkin.init = &init;
+		clk = devm_clk_register(&client->dev, &drvdata->clkin);
+		if (IS_ERR(clk)) {
+			dev_err(&client->dev, "unable to register %s\n",
+				init.name);
+			return PTR_ERR(clk);
+		}
+	}
+
+	/* Si5351C allows to mux either xtal or clkin to PLL input */
+	num_parents = (drvdata->variant == SI5351_VARIANT_C) ? 2 : 1;
+	parent_names[0] = si5351_input_names[0];
+	parent_names[1] = si5351_input_names[1];
+
+	/* register PLLA */
+	drvdata->pll[0].num = 0;
+	drvdata->pll[0].drvdata = drvdata;
+	drvdata->pll[0].hw.init = &init;
+	memset(&init, 0, sizeof(init));
+	init.name = si5351_pll_names[0];
+	init.ops = &si5351_pll_ops;
+	init.flags = 0;
+	init.parent_names = parent_names;
+	init.num_parents = num_parents;
+	clk = devm_clk_register(&client->dev, &drvdata->pll[0].hw);
+	if (IS_ERR(clk)) {
+		dev_err(&client->dev, "unable to register %s\n", init.name);
+		return -EINVAL;
+	}
+
+	/* register PLLB or VXCO (Si5351B) */
+	drvdata->pll[1].num = 1;
+	drvdata->pll[1].drvdata = drvdata;
+	drvdata->pll[1].hw.init = &init;
+	memset(&init, 0, sizeof(init));
+	if (drvdata->variant == SI5351_VARIANT_B) {
+		init.name = si5351_pll_names[2];
+		init.ops = &si5351_vxco_ops;
+		init.flags = CLK_IS_ROOT;
+		init.parent_names = NULL;
+		init.num_parents = 0;
+	} else {
+		init.name = si5351_pll_names[1];
+		init.ops = &si5351_pll_ops;
+		init.flags = 0;
+		init.parent_names = parent_names;
+		init.num_parents = num_parents;
+	}
+	clk = devm_clk_register(&client->dev, &drvdata->pll[1].hw);
+	if (IS_ERR(clk)) {
+		dev_err(&client->dev, "unable to register %s\n", init.name);
+		return -EINVAL;
+	}
+
+	/* register clk multisync and clk out divider */
+	num_clocks = (drvdata->variant == SI5351_VARIANT_A3) ? 3 : 8;
+	parent_names[0] = si5351_pll_names[0];
+	if (drvdata->variant == SI5351_VARIANT_B)
+		parent_names[1] = si5351_pll_names[2];
+	else
+		parent_names[1] = si5351_pll_names[1];
+
+	drvdata->msynth = devm_kzalloc(&client->dev, num_clocks *
+				       sizeof(*drvdata->msynth), GFP_KERNEL);
+	drvdata->clkout = devm_kzalloc(&client->dev, num_clocks *
+				       sizeof(*drvdata->clkout), GFP_KERNEL);
+
+	drvdata->onecell.clk_num = num_clocks;
+	drvdata->onecell.clks = devm_kzalloc(&client->dev,
+		num_clocks * sizeof(*drvdata->onecell.clks), GFP_KERNEL);
+
+	if (WARN_ON(!drvdata->msynth || !drvdata->clkout ||
+		    !drvdata->onecell.clks))
+		return -ENOMEM;
+
+	for (n = 0; n < num_clocks; n++) {
+		drvdata->msynth[n].num = n;
+		drvdata->msynth[n].drvdata = drvdata;
+		drvdata->msynth[n].hw.init = &init;
+		memset(&init, 0, sizeof(init));
+		init.name = si5351_msynth_names[n];
+		init.ops = &si5351_msynth_ops;
+		init.flags = 0;
+		init.parent_names = parent_names;
+		init.num_parents = 2;
+		clk = devm_clk_register(&client->dev, &drvdata->msynth[n].hw);
+		if (IS_ERR(clk)) {
+			dev_err(&client->dev, "unable to register %s\n",
+				init.name);
+			return -EINVAL;
+		}
+	}
+
+	num_parents = (drvdata->variant == SI5351_VARIANT_C) ? 4 : 3;
+	parent_names[2] = si5351_input_names[0];
+	parent_names[3] = si5351_input_names[1];
+	for (n = 0; n < num_clocks; n++) {
+		parent_names[0] = si5351_msynth_names[n];
+		parent_names[1] = (n < 4) ? si5351_msynth_names[0] :
+			si5351_msynth_names[4];
+
+		drvdata->clkout[n].num = n;
+		drvdata->clkout[n].drvdata = drvdata;
+		drvdata->clkout[n].hw.init = &init;
+		memset(&init, 0, sizeof(init));
+		init.name = si5351_clkout_names[n];
+		init.ops = &si5351_clkout_ops;
+		init.flags = 0;
+		init.parent_names = parent_names;
+		init.num_parents = num_parents;
+		clk = devm_clk_register(&client->dev, &drvdata->clkout[n].hw);
+		if (IS_ERR(clk)) {
+			dev_err(&client->dev, "unable to register %s\n",
+				init.name);
+			return -EINVAL;
+		}
+		drvdata->onecell.clks[n] = clk;
+	}
+
+	/* setup clock setup from DT */
+	si5351_dt_setup(client, drvdata);
+
+	ret = of_clk_add_provider(client->dev.of_node, of_clk_src_onecell_get,
+				  &drvdata->onecell);
+	if (ret) {
+		dev_err(&client->dev, "unable to add clk provider\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id si5351_i2c_ids[] = {
+	{ "silabs,si5351", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, si5351_i2c_ids);
+
+static struct i2c_driver si5351_driver = {
+	.driver = {
+		.name = "si5351",
+		.of_match_table = si5351_dt_ids,
+	},
+	.probe = si5351_i2c_probe,
+	.id_table = si5351_i2c_ids,
+};
+module_i2c_driver(si5351_driver);
+
+MODULE_AUTHOR("Sebastian Hesselbarth <sebastian.hesselbarth@gmail.de");
+MODULE_DESCRIPTION("Silicon Labs Si5351A/B/C clock generator driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/clk/clk-si5351.h b/drivers/clk/clk-si5351.h
new file mode 100644
index 0000000..424073c
--- /dev/null
+++ b/drivers/clk/clk-si5351.h
@@ -0,0 +1,155 @@
+/*
+ * clk-si5351.h: Silicon Laboratories Si5351A/B/C I2C Clock Generator
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ * Rabeeh Khoury <rabeeh@solid-run.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef _CLK_SI5351_H_
+#define _CLK_SI5351_H_
+
+#define SI5351_BUS_BASE_ADDR			0x60
+
+#define SI5351_PLL_VCO_MIN			600000000
+#define SI5351_PLL_VCO_MAX			900000000
+#define SI5351_MULTISYNTH_MIN_FREQ		1000000
+#define SI5351_MULTISYNTH_DIVBY4_FREQ		150000000
+#define SI5351_MULTISYNTH_MAX_FREQ		160000000
+#define SI5351_MULTISYNTH67_MAX_FREQ		SI5351_MULTISYNTH_DIVBY4_FREQ
+#define SI5351_CLKOUT_MIN_FREQ			8000
+#define SI5351_CLKOUT_MAX_FREQ			SI5351_MULTISYNTH_MAX_FREQ
+#define SI5351_CLKOUT67_MAX_FREQ		SI5351_MULTISYNTH67_MAX_FREQ
+
+#define SI5351_PLL_A_MIN			15
+#define SI5351_PLL_A_MAX			90
+#define SI5351_PLL_B_MAX			(SI5351_PLL_C_MAX-1)
+#define SI5351_PLL_C_MAX			1048575
+#define SI5351_MULTISYNTH_A_MIN			6
+#define SI5351_MULTISYNTH_A_MAX			1800
+#define SI5351_MULTISYNTH67_A_MAX		254
+#define SI5351_MULTISYNTH_B_MAX			(SI5351_MULTISYNTH_C_MAX-1)
+#define SI5351_MULTISYNTH_C_MAX			1048575
+#define SI5351_MULTISYNTH_P1_MAX		((1<<18)-1)
+#define SI5351_MULTISYNTH_P2_MAX		((1<<20)-1)
+#define SI5351_MULTISYNTH_P3_MAX		((1<<20)-1)
+
+#define SI5351_DEVICE_STATUS			0
+#define SI5351_INTERRUPT_STATUS			1
+#define SI5351_INTERRUPT_MASK			2
+#define  SI5351_STATUS_SYS_INIT			(1<<7)
+#define  SI5351_STATUS_LOL_B			(1<<6)
+#define  SI5351_STATUS_LOL_A			(1<<5)
+#define  SI5351_STATUS_LOS			(1<<4)
+#define SI5351_OUTPUT_ENABLE_CTRL		3
+#define SI5351_OEB_PIN_ENABLE_CTRL		9
+#define SI5351_PLL_INPUT_SOURCE			15
+#define  SI5351_CLKIN_DIV_MASK			(3<<6)
+#define  SI5351_CLKIN_DIV_1			(0<<6)
+#define  SI5351_CLKIN_DIV_2			(1<<6)
+#define  SI5351_CLKIN_DIV_4			(2<<6)
+#define  SI5351_CLKIN_DIV_8			(3<<6)
+#define  SI5351_PLLB_SOURCE			(1<<3)
+#define  SI5351_PLLA_SOURCE			(1<<2)
+
+#define SI5351_CLK0_CTRL			16
+#define SI5351_CLK1_CTRL			17
+#define SI5351_CLK2_CTRL			18
+#define SI5351_CLK3_CTRL			19
+#define SI5351_CLK4_CTRL			20
+#define SI5351_CLK5_CTRL			21
+#define SI5351_CLK6_CTRL			22
+#define SI5351_CLK7_CTRL			23
+#define  SI5351_CLK_POWERDOWN			(1<<7)
+#define  SI5351_CLK_INTEGER_MODE		(1<<6)
+#define  SI5351_CLK_PLL_SELECT			(1<<5)
+#define  SI5351_CLK_INVERT			(1<<4)
+#define  SI5351_CLK_INPUT_MASK			(3<<2)
+#define  SI5351_CLK_INPUT_XTAL			(0<<2)
+#define  SI5351_CLK_INPUT_CLKIN			(1<<2)
+#define  SI5351_CLK_INPUT_MULTISYNTH_0_4	(2<<2)
+#define  SI5351_CLK_INPUT_MULTISYNTH_N		(3<<2)
+#define  SI5351_CLK_DRIVE_MASK			(3<<0)
+#define  SI5351_CLK_DRIVE_2MA			(0<<0)
+#define  SI5351_CLK_DRIVE_4MA			(1<<0)
+#define  SI5351_CLK_DRIVE_6MA			(2<<0)
+#define  SI5351_CLK_DRIVE_8MA			(3<<0)
+
+#define SI5351_CLK3_0_DISABLE_STATE		24
+#define SI5351_CLK7_4_DISABLE_STATE		25
+#define  SI5351_CLK_DISABLE_STATE_LOW		0
+#define  SI5351_CLK_DISABLE_STATE_HIGH		1
+#define  SI5351_CLK_DISABLE_STATE_FLOAT		2
+#define  SI5351_CLK_DISABLE_STATE_NEVER		3
+
+#define SI5351_PARAMETERS_LENGTH		8
+#define SI5351_PLLA_PARAMETERS			26
+#define SI5351_PLLB_PARAMETERS			34
+#define SI5351_CLK0_PARAMETERS			42
+#define SI5351_CLK1_PARAMETERS			50
+#define SI5351_CLK2_PARAMETERS			58
+#define SI5351_CLK3_PARAMETERS			66
+#define SI5351_CLK4_PARAMETERS			74
+#define SI5351_CLK5_PARAMETERS			82
+#define SI5351_CLK6_PARAMETERS			90
+#define SI5351_CLK7_PARAMETERS			91
+#define SI5351_CLK6_7_OUTPUT_DIVIDER		92
+#define  SI5351_OUTPUT_CLK_DIV_MASK		(7 << 4)
+#define  SI5351_OUTPUT_CLK6_DIV_MASK		(7 << 0)
+#define  SI5351_OUTPUT_CLK_DIV_SHIFT		4
+#define  SI5351_OUTPUT_CLK_DIV6_SHIFT		0
+#define  SI5351_OUTPUT_CLK_DIV_1		0
+#define  SI5351_OUTPUT_CLK_DIV_2		1
+#define  SI5351_OUTPUT_CLK_DIV_4		2
+#define  SI5351_OUTPUT_CLK_DIV_8		3
+#define  SI5351_OUTPUT_CLK_DIV_16		4
+#define  SI5351_OUTPUT_CLK_DIV_32		5
+#define  SI5351_OUTPUT_CLK_DIV_64		6
+#define  SI5351_OUTPUT_CLK_DIV_128		7
+#define  SI5351_OUTPUT_CLK_DIVBY4		(3<<2)
+
+#define SI5351_SSC_PARAM0			149
+#define SI5351_SSC_PARAM1			150
+#define SI5351_SSC_PARAM2			151
+#define SI5351_SSC_PARAM3			152
+#define SI5351_SSC_PARAM4			153
+#define SI5351_SSC_PARAM5			154
+#define SI5351_SSC_PARAM6			155
+#define SI5351_SSC_PARAM7			156
+#define SI5351_SSC_PARAM8			157
+#define SI5351_SSC_PARAM9			158
+#define SI5351_SSC_PARAM10			159
+#define SI5351_SSC_PARAM11			160
+#define SI5351_SSC_PARAM12			161
+
+#define SI5351_VXCO_PARAMETERS_LOW		162
+#define SI5351_VXCO_PARAMETERS_MID		163
+#define SI5351_VXCO_PARAMETERS_HIGH		164
+
+#define SI5351_CLK0_PHASE_OFFSET		165
+#define SI5351_CLK1_PHASE_OFFSET		166
+#define SI5351_CLK2_PHASE_OFFSET		167
+#define SI5351_CLK3_PHASE_OFFSET		168
+#define SI5351_CLK4_PHASE_OFFSET		169
+#define SI5351_CLK5_PHASE_OFFSET		170
+
+#define SI5351_PLL_RESET			177
+#define  SI5351_PLL_RESET_B			(1<<7)
+#define  SI5351_PLL_RESET_A			(1<<5)
+
+#define SI5351_CRYSTAL_LOAD			183
+#define  SI5351_CRYSTAL_LOAD_MASK		(3<<6)
+#define  SI5351_CRYSTAL_LOAD_6PF		(1<<6)
+#define  SI5351_CRYSTAL_LOAD_8PF		(2<<6)
+#define  SI5351_CRYSTAL_LOAD_10PF		(3<<6)
+
+#define SI5351_FANOUT_ENABLE			187
+#define  SI5351_CLKIN_ENABLE			(1<<7)
+#define  SI5351_XTAL_ENABLE			(1<<6)
+#define  SI5351_MULTISYNTH_ENABLE		(1<<4)
+
+#endif
