diff mbox

[2/2] ARM: S3C64XX: Slow down mic detection rate for wm5102

Message ID 1364469746-5026-2-git-send-email-broonie@opensource.wolfsonmicro.com (mailing list archive)
State New, archived
Headers show

Commit Message

Mark Brown March 28, 2013, 11:22 a.m. UTC
From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>

A slightly slower rate provides more reliable jack detection during
slower insertions.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 arch/arm/mach-s3c64xx/mach-crag6410-module.c |    1 +
 1 file changed, 1 insertion(+)

Comments

Kim Kukjin April 2, 2013, 9:39 a.m. UTC | #1
Mark Brown wrote:
> 
> From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> 
> A slightly slower rate provides more reliable jack detection during
> slower insertions.
> 
> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> ---
>  arch/arm/mach-s3c64xx/mach-crag6410-module.c |    1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-
> s3c64xx/mach-crag6410-module.c
> index bf3d1c0..a946b75 100644
> --- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
> +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
> @@ -210,6 +210,7 @@ static struct arizona_pdata wm5102_reva_pdata = {
>  	.gpio_base = CODEC_GPIO_BASE,
>  	.irq_active_high = true,
>  	.micd_pol_gpio = CODEC_GPIO_BASE + 4,
> +	.micd_rate = 6,
>  	.gpio_defaults = {
>  		[2] = 0x10000, /* AIF3TXLRCLK */
>  		[3] = 0x4,     /* OPCLK */
> --
> 1.7.10.4

Applied, thanks.

- Kukjin
diff mbox

Patch

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index bf3d1c0..a946b75 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -210,6 +210,7 @@  static struct arizona_pdata wm5102_reva_pdata = {
 	.gpio_base = CODEC_GPIO_BASE,
 	.irq_active_high = true,
 	.micd_pol_gpio = CODEC_GPIO_BASE + 4,
+	.micd_rate = 6,
 	.gpio_defaults = {
 		[2] = 0x10000, /* AIF3TXLRCLK */
 		[3] = 0x4,     /* OPCLK */