@@ -98,6 +98,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
imx53-mba53.dtb \
imx53-qsb.dtb \
imx53-smd.dtb \
+ imx6dl-sabresd.dtb \
imx6q-arm2.dtb \
imx6q-sabreauto.dtb \
imx6q-sabrelite.dtb \
new file mode 100644
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsip"
+#include "imx6qdl-sabresd.dtsip"
+
+/ {
+ model = "Freescale i.MX6 DualLite SABRE Smart Device Board";
+ compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6DL_PAD_GPIO_4__GPIO1_IO04 0x80000000
+ MX6DL_PAD_GPIO_5__GPIO1_IO05 0x80000000
+ MX6DL_PAD_NANDF_D0__GPIO2_IO00 0x80000000
+ MX6DL_PAD_NANDF_D1__GPIO2_IO01 0x80000000
+ MX6DL_PAD_NANDF_D2__GPIO2_IO02 0x80000000
+ MX6DL_PAD_NANDF_D3__GPIO2_IO03 0x80000000
+ >;
+ };
+ };
+};
@@ -1,3 +1,4 @@
+
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
@@ -7,7 +8,8 @@
*
*/
-/include/ "imx6qdl.dtsi"
+#include "imx6qdl.dtsip"
+#include "imx6dl-pinfunc.h"
/ {
cpus {
@@ -29,6 +31,87 @@
soc {
aips1: aips-bus@02000000 {
+ iomuxc: iomuxc@020e0000 {
+ compatible = "fsl,imx6dl-iomuxc";
+ reg = <0x020e0000 0x4000>;
+
+ enet {
+ pinctrl_enet_1: enetgrp-1 {
+ fsl,pins = <
+ MX6DL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6DL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6DL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6DL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6DL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6DL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6DL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6DL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6DL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6DL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6DL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6DL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6DL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6DL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6DL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ >;
+ };
+ };
+
+ uart1 {
+ pinctrl_uart1_1: uart1grp-1 {
+ fsl,pins = <
+ MX6DL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6DL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+ };
+
+ usbotg {
+ pinctrl_usbotg_2: usbotggrp-2 {
+ fsl,pins = <
+ MX6DL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+ >;
+ };
+ };
+
+ usdhc2 {
+ pinctrl_usdhc2_1: usdhc2grp-1 {
+ fsl,pins = <
+ MX6DL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6DL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6DL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6DL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6DL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6DL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ MX6DL_PAD_NANDF_D4__SD2_DATA4 0x17059
+ MX6DL_PAD_NANDF_D5__SD2_DATA5 0x17059
+ MX6DL_PAD_NANDF_D6__SD2_DATA6 0x17059
+ MX6DL_PAD_NANDF_D7__SD2_DATA7 0x17059
+ >;
+ };
+ };
+
+ usdhc3 {
+ pinctrl_usdhc3_1: usdhc3grp-1 {
+ fsl,pins = <
+ MX6DL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6DL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6DL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6DL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6DL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6DL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6DL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+ MX6DL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+ MX6DL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+ MX6DL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+ >;
+ };
+ };
+
+
+ };
+
pxp: pxp@020f0000 {
reg = <0x020f0000 0x4000>;
interrupts = <0 98 0x04>;
Add initial imx6dl-sabresd support based on the common stuff already in imx6qdl-sabresd.dtsip. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6dl-sabresd.dtsp | 35 ++++++++++++++ arch/arm/boot/dts/imx6dl.dtsip | 85 ++++++++++++++++++++++++++++++++- 3 files changed, 120 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/imx6dl-sabresd.dtsp