@@ -58,6 +58,13 @@ config ARCH_KIRKWOOD_DT
Say 'Y' here if you want your kernel to support the
Marvell Kirkwood using flattened device tree.
+config MACH_SHEEVAPLUG_DT
+ bool "Marvell (eSATA) SheevaPlug (Flattened Device Tree)"
+ select ARCH_KIRKWOOD_DT
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell (eSATA) SheevaPlug (Flattened Device Tree).
+
config MACH_GURUPLUG_DT
bool "Marvell GuruPlug Reference Board (Flattened Device Tree)"
select ARCH_KIRKWOOD_DT
@@ -22,6 +22,7 @@ obj-$(CONFIG_MACH_T5325) += t5325-setup.o
obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o
obj-$(CONFIG_MACH_GURUPLUG_DT) += board-guruplug.o
+obj-$(CONFIG_MACH_SHEEVAPLUG_DT) += board-sheevaplug.o
obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o
obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o
obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o
@@ -112,6 +112,9 @@ static void __init kirkwood_dt_init(void)
if (of_machine_is_compatible("globalscale,guruplug"))
guruplug_dt_init();
+ if (of_machine_is_compatible("globalscale,sheevaplug"))
+ sheevaplug_dt_init();
+
if (of_machine_is_compatible("dlink,dns-kirkwood"))
dnskw_init();
@@ -161,6 +164,7 @@ static void __init kirkwood_dt_init(void)
static const char * const kirkwood_dt_board_compat[] = {
"globalscale,dreamplug",
"globalscale,guruplug",
+ "globalscale,sheevaplug",
"dlink,dns-320",
"dlink,dns-325",
"iom,iconnect",
new file mode 100644
@@ -0,0 +1,27 @@
+/*
+ * arch/arm/mach-kirkwood/board-sheevaplug.c
+ *
+ * Marvell Sheevaplug Reference Board Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mv643xx_eth.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+void __init sheevaplug_dt_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_ge00_init(&sheevaplug_ge00_data);
+}
@@ -65,6 +65,11 @@ void guruplug_dt_init(void);
#else
static inline void guruplug_dt_init(void) {};
#endif
+#ifdef CONFIG_MACH_SHEEVAPLUG_DT
+void sheevaplug_dt_init(void);
+#else
+static inline void sheevaplug_dt_init(void) {};
+#endif
#ifdef CONFIG_MACH_TS219_DT
void qnap_dt_ts219_init(void);
#else
Signed-off-by: Simon Baatz <gmbnomis@gmail.com> --- arch/arm/mach-kirkwood/Kconfig | 7 +++++++ arch/arm/mach-kirkwood/Makefile | 1 + arch/arm/mach-kirkwood/board-dt.c | 4 ++++ arch/arm/mach-kirkwood/board-sheevaplug.c | 27 +++++++++++++++++++++++++++ arch/arm/mach-kirkwood/common.h | 5 +++++ 5 files changed, 44 insertions(+) create mode 100644 arch/arm/mach-kirkwood/board-sheevaplug.c