diff --git a/Documentation/devicetree/bindings/arm/cci.txt b/Documentation/devicetree/bindings/arm/cci.txt
new file mode 100644
index 0000000..384b460
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cci.txt
@@ -0,0 +1,161 @@
+=======================================================
+ARM CCI cache coherent interconnect binding description
+=======================================================
+
+ARM multi-cluster systems maintain intra-cluster coherency through a
+cache coherent interconnect (CCI) that is capable of monitoring bus
+transactions and manage coherency, TLB invalidations and memory barriers.
+
+It allows snooping and distributed virtual memory message broadcast across
+clusters, through memory mapped interface, with a global control register
+space and multiple sets of interface control registers, one per slave
+interface.
+
+Bindings for the CCI node follow the ePAPR standard, available from:
+
+www.power.org/documentation/epapr-version-1-1/
+
+with the addition of the bindings described in this document which are
+specific to ARM.
+
+* CCI interconnect node
+
+	Description: Describes a CCI cache coherent Interconnect component
+
+	Node name must be "cci".
+	Node's parent must be the root node /, and the address space visible
+	through the CCI interconnect is the same as the one seen from the
+	root node (ie from CPUs perspective as per DT standard).
+	Every CCI node has to define the following properties:
+
+	- compatible
+		Usage: required
+		Value type: <string>
+		Definition: must be set to
+			"arm,cci-400"
+
+	- reg
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A standard property. Specifies base physical
+			    address of CCI control registers common to all
+			    interfaces.
+
+	- ranges:
+		Usage: required
+		Value type: <prop-encoded-array>
+		Definition: A standard property. Follow rules in the ePAPR for
+			    hierarchical bus addressing. CCI interfaces
+			    addresses refer to the parent node addressing
+			    scheme to declare their register bases.
+
+	CCI interconnect node can define the following child nodes:
+
+	- CCI control interface nodes
+
+		Node name must be "slave-if".
+		Parent node must be CCI interconnect node.
+
+		A CCI interface node must contain the following properties:
+		- interface-type:
+			Usage: required
+			Value type: <string>
+			Definition: must be set to one of {"ace", "ace-lite"}
+				    depending on the interface type the node
+				    represents.
+
+		- reg:
+			Usage: required
+			Value type: <prop-encoded-array>
+			Definition: the base address and size of the
+				    corresponding interface programming
+				    registers.
+
+* CCI interconnect bus masters
+
+	Description: masters in the device tree connected to a CCI port
+		     (inclusive of CPUs and their cpu nodes).
+
+	A CCI interconnect bus master node must contain the following
+	properties:
+
+	- cci-control-port:
+		Usage: required
+		Value type: <phandle>
+		Definition: a phandle containing the CCI control interface node
+			    the master is connected to.
+
+Example:
+
+	cpus {
+		#size-cells = <0>;
+		#address-cells = <1>;
+
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			cci-control-port = <&cci_control1>;
+			reg = <0x0>;
+		};
+
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			cci-control-port = <&cci_control1>;
+			reg = <0x1>;
+		};
+
+		CPU2: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			cci-control-port = <&cci_control2>;
+			reg = <0x100>;
+		};
+
+		CPU3: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			cci-control-port = <&cci_control2>;
+			reg = <0x101>;
+		};
+
+	};
+
+	dma0: dma@3000000 {
+		compatible = "arm,pl330", "arm,primecell";
+		cci-control-port = <&cci_control0>;
+		reg = <0x0 0x3000000 0x0 0x1000>;
+		interrupts = <10>;
+		#dma-cells = <1>;
+		#dma-channels = <8>;
+		#dma-requests = <32>;
+	};
+
+	cci@2c090000 {
+		compatible = "arm,cci";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0 0x2c090000 0 0x1000>;
+		ranges = <0x0 0x0 0x2c090000 0x6000>;
+
+		cci_control0 : slave-if@1000 {
+			interface-type = "ace-lite";
+			reg = <0x1000 0x1000>;
+		};
+
+		cci_control1 : slave-if@4000 {
+			interface-type = "ace";
+			reg = <0x4000 0x1000>;
+		};
+
+		cci_control2 : slave-if@5000 {
+			interface-type = "ace";
+			reg = <0x5000 0x1000>;
+		};
+	};
+
+This CCI node corresponds to a CCI component whose control registers sits
+at address 0x000000002c090000.
+CCI slave interface @0x000000002c091000 is connected to dma controller dma0.
+CCI slave interface @0x000000002c094000 is connected to CPUs {CPU0, CPU1};
+CCI slave interface @0x000000002c095000 is connected to CPUs {CPU2, CPU3};
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 0f51ed6..38ea85c 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -19,4 +19,11 @@ config OMAP_INTERCONNECT
 
 	help
 	  Driver to enable OMAP interconnect error handling driver.
+
+config ARM_CCI
+	bool "ARM CCI driver support"
+	depends on ARM
+	help
+	  Driver supporting the CCI cache coherent interconnect for ARM
+	  platforms.
 endmenu
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
index 45d997c..2bd9947 100644
--- a/drivers/bus/Makefile
+++ b/drivers/bus/Makefile
@@ -6,3 +6,5 @@ obj-$(CONFIG_OMAP_OCP2SCP)	+= omap-ocp2scp.o
 
 # Interconnect bus driver for OMAP SoCs.
 obj-$(CONFIG_OMAP_INTERCONNECT)	+= omap_l3_smx.o omap_l3_noc.o
+# CCI cache coherent interconnect for ARM platforms
+obj-$(CONFIG_ARM_CCI)		+= arm-cci.o
diff --git a/drivers/bus/arm-cci.c b/drivers/bus/arm-cci.c
new file mode 100644
index 0000000..fb9e8e0
--- /dev/null
+++ b/drivers/bus/arm-cci.c
@@ -0,0 +1,372 @@
+/*
+ * CCI cache coherent interconnect driver
+ *
+ * Copyright (C) 2013 ARM Ltd.
+ * Author: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/arm-cci.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <asm/cacheflush.h>
+#include <asm/dt_affinity.h>
+#include <asm/outercache.h>
+#include <asm/smp_plat.h>
+
+#define DRIVER_NAME		"CCI"
+
+#define CCI_PORT_CTRL		0x0
+#define CCI_CTRL_STATUS		0xc
+
+#define CCI_ENABLE_SNOOP_REQ	0x1
+#define CCI_ENABLE_DVM_REQ	0x2
+#define CCI_ENABLE_REQ		(CCI_ENABLE_SNOOP_REQ | CCI_ENABLE_DVM_REQ)
+
+struct cci_nb_ports {
+	unsigned int nb_ace;
+	unsigned int nb_ace_lite;
+};
+
+enum cci_ace_port_type {
+	ACE_INVALID_PORT = 0x0,
+	ACE_PORT,
+	ACE_LITE_PORT,
+};
+
+struct cci_ace_port {
+	void __iomem *base;
+	int type;
+	struct device_node *dn;
+};
+
+static struct cci_ace_port *ports;
+static unsigned int nb_cci_ports;
+
+static void __iomem *cci_ctrl_base;
+#define INVALID_PORT_IDX	-1
+static int cpu_port[NR_CPUS] = { [0 ... NR_CPUS-1] = INVALID_PORT_IDX };
+
+/*
+ * __cci_ace_get_port - Function to retrieve the port index connected to
+ *			a cpu or device.
+ *
+ * @dn = device node of the device to look-up
+ * @type = port type
+ *
+ * Return value:
+ *	- CCI port index if success
+ *	- -ENODEV if failure
+ */
+static int __cci_ace_get_port(struct device_node *dn, int type)
+{
+	int i;
+	bool ace_match;
+	struct device_node *cci_portn;
+
+	cci_portn = of_parse_phandle(dn, "cci-control-port", 0);
+	for (i = 0; i < nb_cci_ports; i++) {
+		ace_match = ports[i].type == type;
+		if (ace_match && cci_portn == ports[i].dn)
+			return i;
+	}
+	return -ENODEV;
+}
+
+int cci_ace_get_port(struct device_node *dn)
+{
+	return __cci_ace_get_port(dn, ACE_LITE_PORT);
+}
+EXPORT_SYMBOL_GPL(cci_ace_get_port);
+
+static void __init cci_ace_init_ports(void)
+{
+	int port, ac, cpu;
+	u64 hwid;
+	const u32 *cell;
+	struct device_node *cpun, *cpus;
+
+	cpus = of_find_node_by_path("/cpus");
+	if (WARN(!cpus, "Missing cpus node, bailing out\n"))
+		return;
+
+	if (WARN_ON(of_property_read_u32(cpus, "#address-cells", &ac)))
+		ac = of_n_addr_cells(cpus);
+	/*
+	 * Port index look-up speeds up the function disabling ports by CPU,
+	 * since the logical to port index mapping is done once and does
+	 * not change after system boot.
+	 * The stashed index array is initialized for all possible CPUs
+	 * at probe time.
+	 */
+	for_each_child_of_node(cpus, cpun) {
+		if (of_node_cmp(cpun->type, "cpu"))
+			continue;
+		cell = of_get_property(cpun, "reg", NULL);
+		if (WARN(!cell, "%s: missing reg property\n", cpun->full_name))
+			continue;
+		hwid = of_read_number(cell, ac);
+		cpu = get_logical_index(hwid & MPIDR_HWID_BITMASK);
+		if (cpu < 0)
+			continue;
+		port = __cci_ace_get_port(cpun, ACE_PORT);
+		if (port < 0)
+			continue;
+		cpu_port[cpu] = port;
+	}
+
+	for_each_possible_cpu(cpu) {
+		WARN(cpu_port[cpu] == INVALID_PORT_IDX, "CPU %d has an invalid CCI port index\n",
+							cpu);
+	}
+}
+
+/*
+ * Functions to enable/disable a CCI interconnect slave port
+ *
+ * They are called by low-level power management code to disable slave
+ * interfaces snoops and DVM broadcast.
+ * Since they may execute with cache data allocation disabled and
+ * after the caches have been cleaned and invalidated the functions provide
+ * no explicit locking since they may run with D-cache disabled, so normal
+ * cacheable kernel locks based on ldrex/strex may not work.
+ * Locking has to be provided by BSP implementations to ensure proper
+ * operations.
+ */
+
+/*
+ * cci_port_control()
+ *	@port = index of the port to setup
+ *	@enable = if true enables the port, if false disables it
+ */
+static void notrace cci_port_control(unsigned int port, bool enable)
+{
+	void __iomem *base = ports[port].base;
+
+	writel_relaxed(enable ? CCI_ENABLE_REQ : 0, base + CCI_PORT_CTRL);
+	/*
+	 * This function is called from power down procedures
+	 * and must not execute any instruction that might
+	 * cause the processor to be put in a quiescent state
+	 * (eg wfi). Hence, cpu_relax() can not be added to this
+	 * read loop to optimize power, since it might hide possibly
+	 * disruptive operations.
+	 */
+	while (readl_relaxed(cci_ctrl_base + CCI_CTRL_STATUS) & 0x1)
+			;
+}
+
+/*
+ * cci_disable_port_by_cpu()
+ *	@mpidr = mpidr of the CPU whose CCI port should be disabled
+ *	Returns:
+ *		0 on success
+ *		-ENODEV on port look-up failure
+ *
+ * Disabling a CCI port for a CPU implies disabling the CCI port
+ * controlling that CPU cluster. Code disabling CPU CCI ports
+ * must make sure that the CPU running the code is the last active CPU
+ * in the cluster ie all other CPUs are quiescent in a low power state.
+ */
+int notrace cci_disable_port_by_cpu(u64 mpidr)
+{
+	int cpu = get_logical_index(mpidr & MPIDR_HWID_BITMASK);
+
+	if (cpu < 0 || cpu_port[cpu] == INVALID_PORT_IDX)
+		return -ENODEV;
+	cci_port_control(cpu_port[cpu], false);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cci_disable_port_by_cpu);
+
+/*
+ * __cci_control_port_by_device()
+ *	@dn = device node pointer of the device whose CCI port should be
+ *	      controlled
+ *	@enable = if true enables the port, if false disables it
+ *	Returns:
+ *		0 on success
+ *		-ENODEV on port look-up failure
+ */
+int notrace __cci_control_port_by_device(struct device_node *dn, bool enable)
+{
+	int port;
+
+	if (!dn)
+		return -ENODEV;
+
+	port = __cci_ace_get_port(dn, ACE_LITE_PORT);
+	if (WARN_ONCE(port < 0, "node %s ACE lite port look-up failure\n",
+				dn->full_name))
+		return -ENODEV;
+	cci_port_control(port, enable);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(__cci_control_port_by_device);
+
+/*
+ * __cci_control_port_by_index()
+ *	@port = port index previously retrieved with cci_ace_get_port()
+ *	@enable = if true enables the port, if false disables it
+ *	Returns:
+ *		0 on success
+ *		-ENODEV on port index out of range
+ *		-EPERM if operation carried out on an ACE PORT
+ */
+int notrace __cci_control_port_by_index(u32 port, bool enable)
+{
+	if (port >= nb_cci_ports || ports[port].type == ACE_INVALID_PORT)
+		return -ENODEV;
+	/*
+	 * CCI control for ports connected to CPUS is extremely fragile
+	 * and must be made to go through a specific and controlled
+	 * interface (ie cci_disable_port_by_cpu(); control by general purpose
+	 * indexing is therefore disabled for ACE ports.
+	 */
+	if (ports[port].type == ACE_PORT)
+		return -EPERM;
+
+	cci_port_control(port, enable);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(__cci_control_port_by_index);
+
+static const struct cci_nb_ports cci400_ports = {
+	.nb_ace = 2,
+	.nb_ace_lite = 3
+};
+
+static const struct of_device_id arm_cci_matches[] = {
+	{.compatible = "arm,cci-400", .data = &cci400_ports },
+	{},
+};
+
+static int __init cci_driver_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	struct cci_nb_ports const *cci_config;
+	int ret, i, nb_ace = 0, nb_ace_lite = 0;
+	struct device_node *np, *cp;
+	const char *match_str;
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	match = of_match_device(arm_cci_matches, &pdev->dev);
+
+	if (!match)
+		return -ENODEV;
+
+	cci_config = (struct cci_nb_ports const *)match->data;
+	nb_cci_ports = cci_config->nb_ace + cci_config->nb_ace_lite;
+	ports = kcalloc(sizeof(*ports), nb_cci_ports, GFP_KERNEL);
+	if (!ports)
+		return -ENOMEM;
+
+	np = pdev->dev.of_node;
+
+	cci_ctrl_base = devm_request_and_ioremap(&pdev->dev, res);
+
+	if (!cci_ctrl_base) {
+		dev_err(&pdev->dev, "unable to ioremap CCI ctrl\n");
+		ret = -ENXIO;
+		goto memalloc_err;
+	}
+
+	for_each_child_of_node(np, cp) {
+		i = nb_ace + nb_ace_lite;
+
+		if (i >= nb_cci_ports)
+			break;
+
+		if (of_property_read_string(cp, "interface-type",
+					    &match_str)) {
+			dev_err(&pdev->dev, "node %s missing interface-type property\n",
+				  cp->full_name);
+			continue;
+		}
+
+		if (strcmp(match_str, "ace")
+				&& strcmp(match_str, "ace-lite")) {
+			dev_err(&pdev->dev, "node %s containing invalid interface-type property, skipping it\n",
+					cp->full_name);
+			continue;
+		}
+
+		if (of_address_to_resource(cp, 0, res)) {
+			dev_err(&pdev->dev, "node %s failure in retrieving resources\n",
+				cp->full_name);
+			continue;
+		}
+
+		ports[i].base = devm_request_and_ioremap(&pdev->dev, res);
+
+		if (!ports[i].base) {
+			dev_err(&pdev->dev, "unable to ioremap CCI port %d\n",
+					    i);
+			continue;
+		}
+
+		if (!strcmp(match_str, "ace")) {
+			if (WARN_ON(nb_ace >= cci_config->nb_ace))
+				continue;
+			ports[i].type = ACE_PORT;
+			++nb_ace;
+		} else if (!strcmp(match_str, "ace-lite")) {
+			if (WARN_ON(nb_ace_lite >= cci_config->nb_ace_lite))
+				continue;
+			ports[i].type = ACE_LITE_PORT;
+			++nb_ace_lite;
+		}
+		ports[i].dn = cp;
+	}
+	 /* initialize a stashed array of ACE ports to speed-up look-up */
+	cci_ace_init_ports();
+
+	/*
+	 * Multi-cluster systems may need this data when non-coherent, during
+	 * cluster power-up/power-down. Make sure it reaches main memory.
+	 */
+	sync_cache_w(&cci_ctrl_base);
+	__sync_cache_range_w(ports, sizeof(*ports) * nb_cci_ports);
+	__sync_cache_range_w(cpu_port, sizeof cpu_port);
+	dev_info(&pdev->dev, "ARM CCI driver probed\n");
+	return 0;
+
+memalloc_err:
+
+	kfree(ports);
+	return ret;
+}
+
+static struct platform_driver cci_platform_driver = {
+	.driver = {
+		   .owner = THIS_MODULE,
+		   .name = DRIVER_NAME,
+		   .of_match_table = arm_cci_matches,
+	},
+};
+/*
+ * CCI is inherently a non-hotpluggable device, since it represents
+ * the CPUs access point to the interconnect system.
+ */
+static int __init cci_init(void)
+{
+	return platform_driver_probe(&cci_platform_driver, cci_driver_probe);
+}
+
+module_init(cci_init);
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ARM CCI support");
diff --git a/include/linux/arm-cci.h b/include/linux/arm-cci.h
new file mode 100644
index 0000000..0e70942
--- /dev/null
+++ b/include/linux/arm-cci.h
@@ -0,0 +1,59 @@
+/*
+ * CCI cache coherent interconnect support
+ *
+ * Copyright (C) 2013 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_ARM_CCI_H
+#define __LINUX_ARM_CCI_H
+
+#include <linux/errno.h>
+#include <linux/types.h>
+
+struct device_node;
+
+#ifdef CONFIG_ARM_CCI
+extern int cci_ace_get_port(struct device_node *dn);
+extern int cci_disable_port_by_cpu(u64 mpidr);
+extern int __cci_control_port_by_device(struct device_node *dn, bool enable);
+extern int __cci_control_port_by_index(u32 port, bool enable);
+#else
+static inline int cci_ace_get_port(struct device_node *dn, bool cpu)
+{
+	return -ENODEV;
+}
+static inline int cci_disable_port_by_cpu(u64 mpidr) { return -ENODEV; }
+static inline int __cci_control_port_by_device(struct device_node *dn,
+					       bool enable)
+{
+	return -ENODEV;
+}
+static inline int __cci_control_port_by_index(u32 port, bool enable)
+{
+	return -ENODEV;
+}
+#endif
+#define cci_disable_port_by_device(dev) \
+	__cci_control_port_by_device(dev, false)
+#define cci_enable_port_by_device(dev) \
+	__cci_control_port_by_device(dev, true)
+#define cci_disable_port_by_index(dev) \
+	__cci_control_port_by_index(dev, false)
+#define cci_enable_port_by_index(dev) \
+	__cci_control_port_by_index(dev, true)
+
+#endif
