diff mbox

[1/7] ARM: u300: push down syscon registers

Message ID 1367511416-4312-2-git-send-email-linus.walleij@stericsson.com (mailing list archive)
State New, archived
Headers show

Commit Message

Linus Walleij May 2, 2013, 4:16 p.m. UTC 
From: Linus Walleij <linus.walleij@linaro.org>

Get rid of the <mach/syscon.h> header as a prerequisite for
multiplatform support. Do this by pushing the registers down
to their respective drivers and deleting the unused remainder.

Cc: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Mike: I'm seeking an ACK for this to take it through the
ARM SoC tree alongside the big bowl of DT enablement patches.
---
 arch/arm/mach-u300/core.c                |  26 +-
 arch/arm/mach-u300/include/mach/syscon.h | 592 -------------------------------
 arch/arm/mach-u300/regulator.c           |   9 +-
 drivers/clk/clk-u300.c                   | 343 +++++++++++++++++-
 4 files changed, 373 insertions(+), 597 deletions(-)
 delete mode 100644 arch/arm/mach-u300/include/mach/syscon.h

Comments

Arnd Bergmann May 2, 2013, 4:21 p.m. UTC | #1 
On Thursday 02 May 2013, Linus Walleij wrote:
> From: Linus Walleij <linus.walleij@linaro.org>
> 
> Get rid of the <mach/syscon.h> header as a prerequisite for
> multiplatform support. Do this by pushing the registers down
> to their respective drivers and deleting the unused remainder.
> 
> Cc: Mike Turquette <mturquette@linaro.org>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> Mike: I'm seeking an ACK for this to take it through the
> ARM SoC tree alongside the big bowl of DT enablement patches.
> ---

How do those drivers get to the SYSCON base address? Should they
be using drivers/mfd/syscon.c as the multiplexor instead?

	Arnd
Linus Walleij May 2, 2013, 4:38 p.m. UTC | #2 
On Thu, May 2, 2013 at 6:21 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Thursday 02 May 2013, Linus Walleij wrote:
>> From: Linus Walleij <linus.walleij@linaro.org>
>>
>> Get rid of the <mach/syscon.h> header as a prerequisite for
>> multiplatform support. Do this by pushing the registers down
>> to their respective drivers and deleting the unused remainder.
>>
>> Cc: Mike Turquette <mturquette@linaro.org>
>> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
>> ---
>> Mike: I'm seeking an ACK for this to take it through the
>> ARM SoC tree alongside the big bowl of DT enablement patches.
>> ---
>
> How do those drivers get to the SYSCON base address? Should they
> be using drivers/mfd/syscon.c as the multiplexor instead?

No, there is no mutex to be taken. The consecutive range of memory
addresses are used by different things (mainly the clocks) but there
is no register that needs to be protected against access from two
subsystems simultaneously.

As a follow-up to this series I plan to move also the U300 clocks
to the device tree (similar three-step ladder as used for the Nomadik)
and then they will (hopefully) get the syscon base address from the
device tree.

Yours,
Linus Walleij
Arnd Bergmann May 2, 2013, 5:39 p.m. UTC | #3 
On Thursday 02 May 2013, Linus Walleij wrote:
> > How do those drivers get to the SYSCON base address? Should they
> > be using drivers/mfd/syscon.c as the multiplexor instead?
> 
> No, there is no mutex to be taken. The consecutive range of memory
> addresses are used by different things (mainly the clocks) but there
> is no register that needs to be protected against access from two
> subsystems simultaneously.
> 
> As a follow-up to this series I plan to move also the U300 clocks
> to the device tree (similar three-step ladder as used for the Nomadik)
> and then they will (hopefully) get the syscon base address from the
> device tree.

I was less worried about mutexes than a correct representation
in the device tree. With the syscon driver, you can have the
register ranges described exactly once and just use the offsets
on the regmap in the other drivers.

	Arnd
Mike Turquette May 3, 2013, 4:04 a.m. UTC | #4 
Quoting Linus Walleij (2013-05-02 09:16:49)
> From: Linus Walleij <linus.walleij@linaro.org>
> 
> Get rid of the <mach/syscon.h> header as a prerequisite for
> multiplatform support. Do this by pushing the registers down
> to their respective drivers and deleting the unused remainder.
> 
> Cc: Mike Turquette <mturquette@linaro.org>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> Mike: I'm seeking an ACK for this to take it through the
> ARM SoC tree alongside the big bowl of DT enablement patches.

For the clk-u300.c part:
Acked-by: Mike Turquette <mturquette@linaro.org>
Linus Walleij May 3, 2013, 8:01 a.m. UTC | #5 
On Thu, May 2, 2013 at 7:39 PM, Arnd Bergmann <arnd@arndb.de> wrote:
> On Thursday 02 May 2013, Linus Walleij wrote:
>> > How do those drivers get to the SYSCON base address? Should they
>> > be using drivers/mfd/syscon.c as the multiplexor instead?
>>
>> No, there is no mutex to be taken. The consecutive range of memory
>> addresses are used by different things (mainly the clocks) but there
>> is no register that needs to be protected against access from two
>> subsystems simultaneously.
>>
>> As a follow-up to this series I plan to move also the U300 clocks
>> to the device tree (similar three-step ladder as used for the Nomadik)
>> and then they will (hopefully) get the syscon base address from the
>> device tree.
>
> I was less worried about mutexes than a correct representation
> in the device tree. With the syscon driver, you can have the
> register ranges described exactly once and just use the offsets
> on the regmap in the other drivers.

Hm. This sounds a bit like modeling the Linux subsystems after
the needs of the device tree rather than keeping these two as
separate concepts.

It is true however that the same register base will appear twice:
once for the clk driver, and once for the syscon, which is not
yet in the device tree.

The system controllers on several systems typically share this
aspect.

For the DBx500 PRCMU we have solved the case where the pinctrl
is using a few registers inside the PRCMU range like this:

pinctrl {
        compatible = "stericsson,nmk-pinctrl";
        prcm = <&prcmu>;
};

prcmu: prcmu@80157000 {
        compatible = "stericsson,db8500-prcmu";
        reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x1000>;
        reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
        (...)
};

Then in the code:

if (np) {
        prcm_np = of_parse_phandle(np, "prcm", 0);
        if (prcm_np)
                npct->prcm_base = of_iomap(prcm_np, 0);
}

I could do something similar by creating a U300 syscon node
and referring to it from the clk node, so the clk looks up its
syscon to find the base.

If so, I can build this on top of the current patch series
with multiplatform and all, as I convert the clocks to DT
(which is the next and final step).

Yours,
Linus Walleij
Arnd Bergmann May 3, 2013, 2:43 p.m. UTC | #6 
On Friday 03 May 2013, Linus Walleij wrote:
> I could do something similar by creating a U300 syscon node
> and referring to it from the clk node, so the clk looks up its
> syscon to find the base.
> 
> If so, I can build this on top of the current patch series
> with multiplatform and all, as I convert the clocks to DT
> (which is the next and final step).

Yes, I think this is a good plan. If there are just two drivers,
that is probably the easiest way to do it. Using the syscon
driver is not very different in the end and avoids mapping the
same physical address range multiple times (having a static mapping
avoids this too), and I'd prefer that if you have more drivers
that need to get to the same registers.

	Arnd
diff mbox

Patch

diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index ff99e26..9a46426 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -26,11 +26,35 @@ 
 #include <asm/mach/arch.h>
 
 #include <mach/u300-regs.h>
-#include <mach/syscon.h>
 
 #include "timer.h"
 
 /*
+ * SYSCON addresses applicable to the core machine.
+ */
+
+/* Chip ID register 16bit (R/-) */
+#define U300_SYSCON_CIDR					(0x400)
+/* SMCR */
+#define U300_SYSCON_SMCR					(0x4d0)
+#define U300_SYSCON_SMCR_FIELD_MASK				(0x000e)
+#define U300_SYSCON_SMCR_SEMI_SREFACK_IND			(0x0008)
+#define U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE			(0x0004)
+#define U300_SYSCON_SMCR_SEMI_EXT_BOOT_MODE_ENABLE		(0x0002)
+/* CPU_SW_DBGEN Software Debug Enable 16bit (R/W) */
+#define U300_SYSCON_CSDR					(0x4f0)
+#define U300_SYSCON_CSDR_SW_DEBUG_ENABLE			(0x0001)
+/* PRINT_CONTROL Print Control 16bit (R/-) */
+#define U300_SYSCON_PCR						(0x4f8)
+#define U300_SYSCON_PCR_SERV_IND				(0x0001)
+/* BOOT_CONTROL 16bit (R/-) */
+#define U300_SYSCON_BCR						(0x4fc)
+#define U300_SYSCON_BCR_ACC_CPU_SUBSYS_VINITHI_IND		(0x0400)
+#define U300_SYSCON_BCR_APP_CPU_SUBSYS_VINITHI_IND		(0x0200)
+#define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK			(0x01FC)
+#define U300_SYSCON_BCR_APP_BOOT_SERV_MASK			(0x0003)
+
+/*
  * Static I/O mappings that are needed for booting the U300 platforms. The
  * only things we need are the areas where we find the timer, syscon and
  * intcon, since the remaining device drivers will map their own memory
diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h
deleted file mode 100644
index 10bdd0b..0000000
--- a/arch/arm/mach-u300/include/mach/syscon.h
+++ /dev/null
@@ -1,592 +0,0 @@ 
-/*
- *
- * arch/arm/mach-u300/include/mach/syscon.h
- *
- *
- * Copyright (C) 2008-2012 ST-Ericsson AB
- *
- * Author: Rickard Andersson <rickard.andersson@stericsson.com>
- */
-
-#ifndef __MACH_SYSCON_H
-#define __MACH_SYSCON_H
-
-/*
- * All register defines for SYSCON registers that concerns individual
- * block clocks and reset lines are registered here. This is because
- * we don't want any other file to try to fool around with this stuff.
- */
-
-/* APP side SYSCON registers */
-/* TODO: this is incomplete. Add all from asic_syscon_map.h eventually. */
-/* CLK Control Register 16bit (R/W) */
-#define U300_SYSCON_CCR						(0x0000)
-#define U300_SYSCON_CCR_I2S1_USE_VCXO				(0x0040)
-#define U300_SYSCON_CCR_I2S0_USE_VCXO				(0x0020)
-#define U300_SYSCON_CCR_TURN_VCXO_ON				(0x0008)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK			(0x0007)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER		(0x04)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW			(0x03)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE		(0x02)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH			(0x01)
-#define U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST			(0x00)
-/* CLK Status Register 16bit (R/W) */
-#define U300_SYSCON_CSR						(0x0004)
-#define U300_SYSCON_CSR_PLL208_LOCK_IND				(0x0002)
-#define U300_SYSCON_CSR_PLL13_LOCK_IND				(0x0001)
-/* Reset lines for SLOW devices 16bit (R/W) */
-#define U300_SYSCON_RSR						(0x0014)
-#define U300_SYSCON_RSR_PPM_RESET_EN				(0x0200)
-#define U300_SYSCON_RSR_ACC_TMR_RESET_EN			(0x0100)
-#define U300_SYSCON_RSR_APP_TMR_RESET_EN			(0x0080)
-#define U300_SYSCON_RSR_RTC_RESET_EN				(0x0040)
-#define U300_SYSCON_RSR_KEYPAD_RESET_EN				(0x0020)
-#define U300_SYSCON_RSR_GPIO_RESET_EN				(0x0010)
-#define U300_SYSCON_RSR_EH_RESET_EN				(0x0008)
-#define U300_SYSCON_RSR_BTR_RESET_EN				(0x0004)
-#define U300_SYSCON_RSR_UART_RESET_EN				(0x0002)
-#define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN			(0x0001)
-/* Reset lines for FAST devices 16bit (R/W) */
-#define U300_SYSCON_RFR						(0x0018)
-#define U300_SYSCON_RFR_UART1_RESET_ENABLE			(0x0080)
-#define U300_SYSCON_RFR_SPI_RESET_ENABLE			(0x0040)
-#define U300_SYSCON_RFR_MMC_RESET_ENABLE			(0x0020)
-#define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE			(0x0010)
-#define U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE			(0x0008)
-#define U300_SYSCON_RFR_I2C1_RESET_ENABLE			(0x0004)
-#define U300_SYSCON_RFR_I2C0_RESET_ENABLE			(0x0002)
-#define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE		(0x0001)
-/* Reset lines for the rest of the peripherals 16bit (R/W) */
-#define U300_SYSCON_RRR						(0x001c)
-#define U300_SYSCON_RRR_CDS_RESET_EN				(0x4000)
-#define U300_SYSCON_RRR_ISP_RESET_EN				(0x2000)
-#define U300_SYSCON_RRR_INTCON_RESET_EN				(0x1000)
-#define U300_SYSCON_RRR_MSPRO_RESET_EN				(0x0800)
-#define U300_SYSCON_RRR_XGAM_RESET_EN				(0x0100)
-#define U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN			(0x0080)
-#define U300_SYSCON_RRR_NANDIF_RESET_EN				(0x0040)
-#define U300_SYSCON_RRR_EMIF_RESET_EN				(0x0020)
-#define U300_SYSCON_RRR_DMAC_RESET_EN				(0x0010)
-#define U300_SYSCON_RRR_CPU_RESET_EN				(0x0008)
-#define U300_SYSCON_RRR_APEX_RESET_EN				(0x0004)
-#define U300_SYSCON_RRR_AHB_RESET_EN				(0x0002)
-#define U300_SYSCON_RRR_AAIF_RESET_EN				(0x0001)
-/* Clock enable for SLOW peripherals 16bit (R/W) */
-#define U300_SYSCON_CESR					(0x0020)
-#define U300_SYSCON_CESR_PPM_CLK_EN				(0x0200)
-#define U300_SYSCON_CESR_ACC_TMR_CLK_EN				(0x0100)
-#define U300_SYSCON_CESR_APP_TMR_CLK_EN				(0x0080)
-#define U300_SYSCON_CESR_KEYPAD_CLK_EN				(0x0040)
-#define U300_SYSCON_CESR_GPIO_CLK_EN				(0x0010)
-#define U300_SYSCON_CESR_EH_CLK_EN				(0x0008)
-#define U300_SYSCON_CESR_BTR_CLK_EN				(0x0004)
-#define U300_SYSCON_CESR_UART_CLK_EN				(0x0002)
-#define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN			(0x0001)
-/* Clock enable for FAST peripherals 16bit (R/W) */
-#define U300_SYSCON_CEFR					(0x0024)
-#define U300_SYSCON_CEFR_UART1_CLK_EN				(0x0200)
-#define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN			(0x0100)
-#define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN			(0x0080)
-#define U300_SYSCON_CEFR_SPI_CLK_EN				(0x0040)
-#define U300_SYSCON_CEFR_MMC_CLK_EN				(0x0020)
-#define U300_SYSCON_CEFR_I2S1_CLK_EN				(0x0010)
-#define U300_SYSCON_CEFR_I2S0_CLK_EN				(0x0008)
-#define U300_SYSCON_CEFR_I2C1_CLK_EN				(0x0004)
-#define U300_SYSCON_CEFR_I2C0_CLK_EN				(0x0002)
-#define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN			(0x0001)
-/* Clock enable for the rest of the peripherals 16bit (R/W) */
-#define U300_SYSCON_CERR					(0x0028)
-#define U300_SYSCON_CERR_CDS_CLK_EN				(0x2000)
-#define U300_SYSCON_CERR_ISP_CLK_EN				(0x1000)
-#define U300_SYSCON_CERR_MSPRO_CLK_EN				(0x0800)
-#define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN		(0x0400)
-#define U300_SYSCON_CERR_SEMI_CLK_EN				(0x0200)
-#define U300_SYSCON_CERR_XGAM_CLK_EN				(0x0100)
-#define U300_SYSCON_CERR_VIDEO_ENC_CLK_EN			(0x0080)
-#define U300_SYSCON_CERR_NANDIF_CLK_EN				(0x0040)
-#define U300_SYSCON_CERR_EMIF_CLK_EN				(0x0020)
-#define U300_SYSCON_CERR_DMAC_CLK_EN				(0x0010)
-#define U300_SYSCON_CERR_CPU_CLK_EN				(0x0008)
-#define U300_SYSCON_CERR_APEX_CLK_EN				(0x0004)
-#define U300_SYSCON_CERR_AHB_CLK_EN				(0x0002)
-#define U300_SYSCON_CERR_AAIF_CLK_EN				(0x0001)
-/* Single block clock enable 16bit (-/W) */
-#define U300_SYSCON_SBCER					(0x002c)
-#define U300_SYSCON_SBCER_PPM_CLK_EN				(0x0009)
-#define U300_SYSCON_SBCER_ACC_TMR_CLK_EN			(0x0008)
-#define U300_SYSCON_SBCER_APP_TMR_CLK_EN			(0x0007)
-#define U300_SYSCON_SBCER_KEYPAD_CLK_EN				(0x0006)
-#define U300_SYSCON_SBCER_GPIO_CLK_EN				(0x0004)
-#define U300_SYSCON_SBCER_EH_CLK_EN				(0x0003)
-#define U300_SYSCON_SBCER_BTR_CLK_EN				(0x0002)
-#define U300_SYSCON_SBCER_UART_CLK_EN				(0x0001)
-#define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN			(0x0000)
-#define U300_SYSCON_SBCER_UART1_CLK_EN				(0x0019)
-#define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN			(0x0018)
-#define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN			(0x0017)
-#define U300_SYSCON_SBCER_SPI_CLK_EN				(0x0016)
-#define U300_SYSCON_SBCER_MMC_CLK_EN				(0x0015)
-#define U300_SYSCON_SBCER_I2S1_CLK_EN				(0x0014)
-#define U300_SYSCON_SBCER_I2S0_CLK_EN				(0x0013)
-#define U300_SYSCON_SBCER_I2C1_CLK_EN				(0x0012)
-#define U300_SYSCON_SBCER_I2C0_CLK_EN				(0x0011)
-#define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN			(0x0010)
-#define U300_SYSCON_SBCER_CDS_CLK_EN				(0x002D)
-#define U300_SYSCON_SBCER_ISP_CLK_EN				(0x002C)
-#define U300_SYSCON_SBCER_MSPRO_CLK_EN				(0x002B)
-#define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN		(0x002A)
-#define U300_SYSCON_SBCER_SEMI_CLK_EN				(0x0029)
-#define U300_SYSCON_SBCER_XGAM_CLK_EN				(0x0028)
-#define U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN			(0x0027)
-#define U300_SYSCON_SBCER_NANDIF_CLK_EN				(0x0026)
-#define U300_SYSCON_SBCER_EMIF_CLK_EN				(0x0025)
-#define U300_SYSCON_SBCER_DMAC_CLK_EN				(0x0024)
-#define U300_SYSCON_SBCER_CPU_CLK_EN				(0x0023)
-#define U300_SYSCON_SBCER_APEX_CLK_EN				(0x0022)
-#define U300_SYSCON_SBCER_AHB_CLK_EN				(0x0021)
-#define U300_SYSCON_SBCER_AAIF_CLK_EN				(0x0020)
-/* Single block clock disable 16bit (-/W) */
-#define U300_SYSCON_SBCDR					(0x0030)
-/* Same values as above for SBCER */
-/* Clock force SLOW peripherals 16bit (R/W) */
-#define U300_SYSCON_CFSR					(0x003c)
-#define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN			(0x0200)
-#define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN			(0x0100)
-#define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN			(0x0080)
-#define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN			(0x0020)
-#define U300_SYSCON_CFSR_GPIO_CLK_FORCE_EN			(0x0010)
-#define U300_SYSCON_CFSR_EH_CLK_FORCE_EN			(0x0008)
-#define U300_SYSCON_CFSR_BTR_CLK_FORCE_EN			(0x0004)
-#define U300_SYSCON_CFSR_UART_CLK_FORCE_EN			(0x0002)
-#define U300_SYSCON_CFSR_SLOW_BRIDGE_CLK_FORCE_EN		(0x0001)
-/* Clock force FAST peripherals 16bit (R/W) */
-#define U300_SYSCON_CFFR					(0x40)
-/* Values not defined. Define if you want to use them. */
-/* Clock force the rest of the peripherals 16bit (R/W) */
-#define U300_SYSCON_CFRR					(0x44)
-#define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN			(0x2000)
-#define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN			(0x1000)
-#define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN			(0x0800)
-#define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN		(0x0400)
-#define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN			(0x0200)
-#define U300_SYSCON_CFRR_XGAM_CLK_FORCE_EN			(0x0100)
-#define U300_SYSCON_CFRR_VIDEO_ENC_CLK_FORCE_EN			(0x0080)
-#define U300_SYSCON_CFRR_NANDIF_CLK_FORCE_EN			(0x0040)
-#define U300_SYSCON_CFRR_EMIF_CLK_FORCE_EN			(0x0020)
-#define U300_SYSCON_CFRR_DMAC_CLK_FORCE_EN			(0x0010)
-#define U300_SYSCON_CFRR_CPU_CLK_FORCE_EN			(0x0008)
-#define U300_SYSCON_CFRR_APEX_CLK_FORCE_EN			(0x0004)
-#define U300_SYSCON_CFRR_AHB_CLK_FORCE_EN			(0x0002)
-#define U300_SYSCON_CFRR_AAIF_CLK_FORCE_EN			(0x0001)
-/* PLL208 Frequency Control 16bit (R/W) */
-#define U300_SYSCON_PFCR					(0x48)
-#define U300_SYSCON_PFCR_DPLL_MULT_NUM				(0x000F)
-/* Power Management Control 16bit (R/W) */
-#define U300_SYSCON_PMCR					(0x50)
-#define U300_SYSCON_PMCR_DCON_ENABLE				(0x0002)
-#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE			(0x0001)
-/*
- * All other clocking registers moved to clock.c!
- */
-/* Reset Out 16bit (R/W) */
-#define U300_SYSCON_RCR						(0x6c)
-#define U300_SYSCON_RCR_RESOUT0_RST_N_DISABLE			(0x0001)
-/* EMIF Slew Rate Control 16bit (R/W) */
-#define U300_SYSCON_SRCLR					(0x70)
-#define U300_SYSCON_SRCLR_MASK					(0x03FF)
-#define U300_SYSCON_SRCLR_VALUE					(0x03FF)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_B			(0x0200)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_A			(0x0100)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_B			(0x0080)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_A			(0x0040)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_B			(0x0020)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_A			(0x0010)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_B			(0x0008)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_A			(0x0004)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_B			(0x0002)
-#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_A			(0x0001)
-/* EMIF Clock Control Register 16bit (R/W) */
-#define U300_SYSCON_ECCR					(0x0078)
-#define U300_SYSCON_ECCR_MASK					(0x000F)
-#define U300_SYSCON_ECCR_EMIF_1_STATIC_CLK_EN_N_DISABLE		(0x0008)
-#define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE	(0x0004)
-#define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE		(0x0002)
-#define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE		(0x0001)
-/* Step one for killing the applications system 16bit (-/W) */
-#define U300_SYSCON_KA1R					(0x0080)
-#define U300_SYSCON_KA1R_MASK					(0xFFFF)
-#define U300_SYSCON_KA1R_VALUE					(0xFFFF)
-/* Step two for killing the application system 16bit (-/W) */
-#define U300_SYSCON_KA2R					(0x0084)
-#define U300_SYSCON_KA2R_MASK					(0xFFFF)
-#define U300_SYSCON_KA2R_VALUE					(0xFFFF)
-/* MMC/MSPRO frequency divider register 0 16bit (R/W) */
-#define U300_SYSCON_MMF0R					(0x90)
-#define U300_SYSCON_MMF0R_MASK					(0x00FF)
-#define U300_SYSCON_MMF0R_FREQ_0_HIGH_MASK			(0x00F0)
-#define U300_SYSCON_MMF0R_FREQ_0_LOW_MASK			(0x000F)
-/* MMC/MSPRO frequency divider register 1 16bit (R/W) */
-#define U300_SYSCON_MMF1R					(0x94)
-#define U300_SYSCON_MMF1R_MASK					(0x00FF)
-#define U300_SYSCON_MMF1R_FREQ_1_HIGH_MASK			(0x00F0)
-#define U300_SYSCON_MMF1R_FREQ_1_LOW_MASK			(0x000F)
-/* AAIF control register 16 bit (R/W) */
-#define U300_SYSCON_AAIFCR					(0x98)
-#define U300_SYSCON_AAIFCR_MASK					(0x0003)
-#define U300_SYSCON_AAIFCR_AASW_CTRL_MASK			(0x0003)
-#define U300_SYSCON_AAIFCR_AASW_CTRL_FUNCTIONAL			(0x0000)
-#define U300_SYSCON_AAIFCR_AASW_CTRL_MONITORING			(0x0001)
-#define U300_SYSCON_AAIFCR_AASW_CTRL_ACC_TO_EXT			(0x0002)
-#define U300_SYSCON_AAIFCR_AASW_CTRL_APP_TO_EXT			(0x0003)
-/* Clock control for the MMC and MSPRO blocks 16bit (R/W) */
-#define U300_SYSCON_MMCR					(0x9C)
-#define U300_SYSCON_MMCR_MASK					(0x0003)
-#define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE			(0x0002)
-#define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE			(0x0001)
-/* Pull up/down control (R/W) */
-#define U300_SYSCON_PUCR					(0x104)
-#define U300_SYSCON_PUCR_EMIF_1_WAIT_N_PU_ENABLE		(0x0200)
-#define U300_SYSCON_PUCR_EMIF_1_NFIF_READY_PU_ENABLE		(0x0100)
-#define U300_SYSCON_PUCR_EMIF_1_16BIT_PU_ENABLE			(0x0080)
-#define U300_SYSCON_PUCR_EMIF_1_8BIT_PU_ENABLE			(0x0040)
-#define U300_SYSCON_PUCR_KEY_IN_PU_EN_MASK			(0x003F)
-/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */
-#define U300_SYSCON_S0CCR					(0x120)
-#define U300_SYSCON_S0CCR_FIELD_MASK				(0x43FF)
-#define U300_SYSCON_S0CCR_CLOCK_REQ				(0x4000)
-#define U300_SYSCON_S0CCR_CLOCK_REQ_MONITOR			(0x2000)
-#define U300_SYSCON_S0CCR_CLOCK_INV				(0x0200)
-#define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK			(0x01E0)
-#define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK			(0x001E)
-#define U300_SYSCON_S0CCR_CLOCK_ENABLE				(0x0001)
-#define U300_SYSCON_S0CCR_SEL_MCLK				(0x8<<1)
-#define U300_SYSCON_S0CCR_SEL_ACC_FSM_CLK			(0xA<<1)
-#define U300_SYSCON_S0CCR_SEL_PLL60_48_CLK			(0xC<<1)
-#define U300_SYSCON_S0CCR_SEL_PLL60_60_CLK			(0xD<<1)
-#define U300_SYSCON_S0CCR_SEL_ACC_PLL208_CLK			(0xE<<1)
-#define U300_SYSCON_S0CCR_SEL_APP_PLL13_CLK			(0x0<<1)
-#define U300_SYSCON_S0CCR_SEL_APP_FSM_CLK			(0x2<<1)
-#define U300_SYSCON_S0CCR_SEL_RTC_CLK				(0x4<<1)
-#define U300_SYSCON_S0CCR_SEL_APP_PLL208_CLK			(0x6<<1)
-/* SYS_1_CLK_CONTROL second clock control 16 bit (R/W) */
-#define U300_SYSCON_S1CCR					(0x124)
-#define U300_SYSCON_S1CCR_FIELD_MASK				(0x43FF)
-#define U300_SYSCON_S1CCR_CLOCK_REQ				(0x4000)
-#define U300_SYSCON_S1CCR_CLOCK_REQ_MONITOR			(0x2000)
-#define U300_SYSCON_S1CCR_CLOCK_INV				(0x0200)
-#define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK			(0x01E0)
-#define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK			(0x001E)
-#define U300_SYSCON_S1CCR_CLOCK_ENABLE				(0x0001)
-#define U300_SYSCON_S1CCR_SEL_MCLK				(0x8<<1)
-#define U300_SYSCON_S1CCR_SEL_ACC_FSM_CLK			(0xA<<1)
-#define U300_SYSCON_S1CCR_SEL_PLL60_48_CLK			(0xC<<1)
-#define U300_SYSCON_S1CCR_SEL_PLL60_60_CLK			(0xD<<1)
-#define U300_SYSCON_S1CCR_SEL_ACC_PLL208_CLK			(0xE<<1)
-#define U300_SYSCON_S1CCR_SEL_ACC_PLL13_CLK			(0x0<<1)
-#define U300_SYSCON_S1CCR_SEL_APP_FSM_CLK			(0x2<<1)
-#define U300_SYSCON_S1CCR_SEL_RTC_CLK				(0x4<<1)
-#define U300_SYSCON_S1CCR_SEL_APP_PLL208_CLK			(0x6<<1)
-/* SYS_2_CLK_CONTROL third clock contol 16 bit (R/W) */
-#define U300_SYSCON_S2CCR					(0x128)
-#define U300_SYSCON_S2CCR_FIELD_MASK				(0xC3FF)
-#define U300_SYSCON_S2CCR_CLK_STEAL				(0x8000)
-#define U300_SYSCON_S2CCR_CLOCK_REQ				(0x4000)
-#define U300_SYSCON_S2CCR_CLOCK_REQ_MONITOR			(0x2000)
-#define U300_SYSCON_S2CCR_CLOCK_INV				(0x0200)
-#define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK			(0x01E0)
-#define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK			(0x001E)
-#define U300_SYSCON_S2CCR_CLOCK_ENABLE				(0x0001)
-#define U300_SYSCON_S2CCR_SEL_MCLK				(0x8<<1)
-#define U300_SYSCON_S2CCR_SEL_ACC_FSM_CLK			(0xA<<1)
-#define U300_SYSCON_S2CCR_SEL_PLL60_48_CLK			(0xC<<1)
-#define U300_SYSCON_S2CCR_SEL_PLL60_60_CLK			(0xD<<1)
-#define U300_SYSCON_S2CCR_SEL_ACC_PLL208_CLK			(0xE<<1)
-#define U300_SYSCON_S2CCR_SEL_ACC_PLL13_CLK			(0x0<<1)
-#define U300_SYSCON_S2CCR_SEL_APP_FSM_CLK			(0x2<<1)
-#define U300_SYSCON_S2CCR_SEL_RTC_CLK				(0x4<<1)
-#define U300_SYSCON_S2CCR_SEL_APP_PLL208_CLK			(0x6<<1)
-/* SYS_MISC_CONTROL, miscellaneous 16bit (R/W) */
-#define U300_SYSCON_MCR						(0x12c)
-#define U300_SYSCON_MCR_FIELD_MASK				(0x00FF)
-#define U300_SYSCON_MCR_PMGEN_CR_4_MASK				(0x00C0)
-#define U300_SYSCON_MCR_PMGEN_CR_4_GPIO				(0x0000)
-#define U300_SYSCON_MCR_PMGEN_CR_4_SPI				(0x0040)
-#define U300_SYSCON_MCR_PMGEN_CR_4_AAIF				(0x00C0)
-#define U300_SYSCON_MCR_PMGEN_CR_2_MASK				(0x0030)
-#define U300_SYSCON_MCR_PMGEN_CR_2_GPIO				(0x0000)
-#define U300_SYSCON_MCR_PMGEN_CR_2_EMIF_1_STATIC		(0x0010)
-#define U300_SYSCON_MCR_PMGEN_CR_2_DSP				(0x0020)
-#define U300_SYSCON_MCR_PMGEN_CR_2_AAIF				(0x0030)
-#define U300_SYSCON_MCR_PMGEN_CR_0_MASK				(0x000C)
-#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M1		(0x0000)
-#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M2		(0x0004)
-#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_1_SDRAM_M3		(0x0008)
-#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_0_SDRAM			(0x000C)
-#define U300_SYSCON_MCR_PM1G_MODE_ENABLE			(0x0002)
-#define U300_SYSCON_MCR_PMTG5_MODE_ENABLE			(0x0001)
-/* SC_PLL_IRQ_CONTROL 16bit (R/W) */
-#define U300_SYSCON_PICR					(0x0130)
-#define U300_SYSCON_PICR_MASK					(0x00FF)
-#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_LOW_ENABLE		(0x0080)
-#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_HIGH_ENABLE		(0x0040)
-#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_LOW_ENABLE		(0x0020)
-#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_HIGH_ENABLE		(0x0010)
-#define U300_SYSCON_PICR_IRQMASK_PLL13_UNLOCK_ENABLE		(0x0008)
-#define U300_SYSCON_PICR_IRQMASK_PLL13_LOCK_ENABLE		(0x0004)
-#define U300_SYSCON_PICR_IRQMASK_PLL208_UNLOCK_ENABLE		(0x0002)
-#define U300_SYSCON_PICR_IRQMASK_PLL208_LOCK_ENABLE		(0x0001)
-/* SC_PLL_IRQ_STATUS 16 bit (R/-) */
-#define U300_SYSCON_PISR					(0x0134)
-#define U300_SYSCON_PISR_MASK					(0x000F)
-#define U300_SYSCON_PISR_PLL13_UNLOCK_IND			(0x0008)
-#define U300_SYSCON_PISR_PLL13_LOCK_IND				(0x0004)
-#define U300_SYSCON_PISR_PLL208_UNLOCK_IND			(0x0002)
-#define U300_SYSCON_PISR_PLL208_LOCK_IND			(0x0001)
-/* SC_PLL_IRQ_CLEAR 16 bit (-/W) */
-#define U300_SYSCON_PICLR					(0x0138)
-#define U300_SYSCON_PICLR_MASK					(0x000F)
-#define U300_SYSCON_PICLR_RWMASK				(0x0000)
-#define U300_SYSCON_PICLR_PLL13_UNLOCK_SC			(0x0008)
-#define U300_SYSCON_PICLR_PLL13_LOCK_SC				(0x0004)
-#define U300_SYSCON_PICLR_PLL208_UNLOCK_SC			(0x0002)
-#define U300_SYSCON_PICLR_PLL208_LOCK_SC			(0x0001)
-/* CAMIF_CONTROL 16 bit (-/W) */
-#define U300_SYSCON_CICR					(0x013C)
-#define U300_SYSCON_CICR_MASK					(0x0FFF)
-#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_MASK		(0x0F00)
-#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT1		(0x0C00)
-#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT0		(0x0300)
-#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_MASK		(0x00F0)
-#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT1		(0x00C0)
-#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT0		(0x0030)
-#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_MASK		(0x000F)
-#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT1		(0x000C)
-#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT0		(0x0003)
-/* Clock activity observability register 0 */
-#define U300_SYSCON_C0OAR					(0x140)
-#define U300_SYSCON_C0OAR_MASK					(0xFFFF)
-#define U300_SYSCON_C0OAR_VALUE					(0xFFFF)
-#define U300_SYSCON_C0OAR_BT_H_CLK				(0x8000)
-#define U300_SYSCON_C0OAR_ASPB_P_CLK				(0x4000)
-#define U300_SYSCON_C0OAR_APP_SEMI_H_CLK			(0x2000)
-#define U300_SYSCON_C0OAR_APP_SEMI_CLK				(0x1000)
-#define U300_SYSCON_C0OAR_APP_MMC_MSPRO_CLK			(0x0800)
-#define U300_SYSCON_C0OAR_APP_I2S1_CLK				(0x0400)
-#define U300_SYSCON_C0OAR_APP_I2S0_CLK				(0x0200)
-#define U300_SYSCON_C0OAR_APP_CPU_CLK				(0x0100)
-#define U300_SYSCON_C0OAR_APP_52_CLK				(0x0080)
-#define U300_SYSCON_C0OAR_APP_208_CLK				(0x0040)
-#define U300_SYSCON_C0OAR_APP_104_CLK				(0x0020)
-#define U300_SYSCON_C0OAR_APEX_CLK				(0x0010)
-#define U300_SYSCON_C0OAR_AHPB_M_H_CLK				(0x0008)
-#define U300_SYSCON_C0OAR_AHB_CLK				(0x0004)
-#define U300_SYSCON_C0OAR_AFPB_P_CLK				(0x0002)
-#define U300_SYSCON_C0OAR_AAIF_CLK				(0x0001)
-/* Clock activity observability register 1 */
-#define U300_SYSCON_C1OAR					(0x144)
-#define U300_SYSCON_C1OAR_MASK					(0x3FFE)
-#define U300_SYSCON_C1OAR_VALUE					(0x3FFE)
-#define U300_SYSCON_C1OAR_NFIF_F_CLK				(0x2000)
-#define U300_SYSCON_C1OAR_MSPRO_CLK				(0x1000)
-#define U300_SYSCON_C1OAR_MMC_P_CLK				(0x0800)
-#define U300_SYSCON_C1OAR_MMC_CLK				(0x0400)
-#define U300_SYSCON_C1OAR_KP_P_CLK				(0x0200)
-#define U300_SYSCON_C1OAR_I2C1_P_CLK				(0x0100)
-#define U300_SYSCON_C1OAR_I2C0_P_CLK				(0x0080)
-#define U300_SYSCON_C1OAR_GPIO_CLK				(0x0040)
-#define U300_SYSCON_C1OAR_EMIF_MPMC_CLK				(0x0020)
-#define U300_SYSCON_C1OAR_EMIF_H_CLK				(0x0010)
-#define U300_SYSCON_C1OAR_EVHIST_CLK				(0x0008)
-#define U300_SYSCON_C1OAR_PPM_CLK				(0x0004)
-#define U300_SYSCON_C1OAR_DMA_CLK				(0x0002)
-/* Clock activity observability register 2 */
-#define U300_SYSCON_C2OAR					(0x148)
-#define U300_SYSCON_C2OAR_MASK					(0x0FFF)
-#define U300_SYSCON_C2OAR_VALUE					(0x0FFF)
-#define U300_SYSCON_C2OAR_XGAM_CDI_CLK				(0x0800)
-#define U300_SYSCON_C2OAR_XGAM_CLK				(0x0400)
-#define U300_SYSCON_C2OAR_VC_H_CLK				(0x0200)
-#define U300_SYSCON_C2OAR_VC_CLK				(0x0100)
-#define U300_SYSCON_C2OAR_UA_P_CLK				(0x0080)
-#define U300_SYSCON_C2OAR_TMR1_CLK				(0x0040)
-#define U300_SYSCON_C2OAR_TMR0_CLK				(0x0020)
-#define U300_SYSCON_C2OAR_SPI_P_CLK				(0x0010)
-#define U300_SYSCON_C2OAR_PCM_I2S1_CORE_CLK			(0x0008)
-#define U300_SYSCON_C2OAR_PCM_I2S1_CLK				(0x0004)
-#define U300_SYSCON_C2OAR_PCM_I2S0_CORE_CLK			(0x0002)
-#define U300_SYSCON_C2OAR_PCM_I2S0_CLK				(0x0001)
-
-/* Chip ID register 16bit (R/-) */
-#define U300_SYSCON_CIDR					(0x400)
-/* Video IRQ clear 16bit (R/W) */
-#define U300_SYSCON_VICR					(0x404)
-#define U300_SYSCON_VICR_VIDEO1_IRQ_CLEAR_ENABLE		(0x0002)
-#define U300_SYSCON_VICR_VIDEO0_IRQ_CLEAR_ENABLE		(0x0001)
-/* SMCR */
-#define U300_SYSCON_SMCR					(0x4d0)
-#define U300_SYSCON_SMCR_FIELD_MASK				(0x000e)
-#define U300_SYSCON_SMCR_SEMI_SREFACK_IND			(0x0008)
-#define U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE			(0x0004)
-#define U300_SYSCON_SMCR_SEMI_EXT_BOOT_MODE_ENABLE		(0x0002)
-/* CPU_SW_DBGEN Software Debug Enable 16bit (R/W) */
-#define U300_SYSCON_CSDR					(0x4f0)
-#define U300_SYSCON_CSDR_SW_DEBUG_ENABLE			(0x0001)
-/* PRINT_CONTROL Print Control 16bit (R/-) */
-#define U300_SYSCON_PCR						(0x4f8)
-#define U300_SYSCON_PCR_SERV_IND				(0x0001)
-/* BOOT_CONTROL 16bit (R/-) */
-#define U300_SYSCON_BCR						(0x4fc)
-#define U300_SYSCON_BCR_ACC_CPU_SUBSYS_VINITHI_IND		(0x0400)
-#define U300_SYSCON_BCR_APP_CPU_SUBSYS_VINITHI_IND		(0x0200)
-#define U300_SYSCON_BCR_EXTRA_BOOT_OPTION_MASK			(0x01FC)
-#define U300_SYSCON_BCR_APP_BOOT_SERV_MASK			(0x0003)
-
-
-/* CPU clock defines */
-/**
- * CPU high frequency in MHz
- */
-#define SYSCON_CPU_CLOCK_HIGH    208
-/**
- * CPU medium frequency in MHz
- */
-#define SYSCON_CPU_CLOCK_MEDIUM   52
-/**
- * CPU low frequency in MHz
- */
-#define SYSCON_CPU_CLOCK_LOW      13
-
-/* EMIF clock defines */
-/**
- * EMIF high frequency in MHz
- */
-#define SYSCON_EMIF_CLOCK_HIGH   104
-/**
- * EMIF medium frequency in MHz
- */
-#define SYSCON_EMIF_CLOCK_MEDIUM  52
-/**
- * EMIF low frequency in MHz
- */
-#define SYSCON_EMIF_CLOCK_LOW     13
-
-/* AHB clock defines */
-/**
- * AHB high frequency in MHz
- */
-#define SYSCON_AHB_CLOCK_HIGH     52
-/**
- * AHB medium frequency in MHz
- */
-#define SYSCON_AHB_CLOCK_MEDIUM   26
-/**
- * AHB low frequency in MHz
- */
-#define SYSCON_AHB_CLOCK_LOW       7  /* i.e 13/2=6.5MHz */
-
-enum syscon_busmaster {
-  SYSCON_BM_DMAC,
-  SYSCON_BM_XGAM,
-  SYSCON_BM_VIDEO_ENC
-};
-
-/* Selectr a resistor or a set of resistors */
-enum syscon_pull_up_down {
-  SYSCON_PU_KEY_IN_EN,
-  SYSCON_PU_EMIF_1_8_BIT_EN,
-  SYSCON_PU_EMIF_1_16_BIT_EN,
-  SYSCON_PU_EMIF_1_NFIF_READY_EN,
-  SYSCON_PU_EMIF_1_NFIF_WAIT_N_EN,
-};
-
-/*
- * Note that this array must match the order of the array "clk_reg"
- * in syscon.c
- */
-enum syscon_clk {
-  SYSCON_CLKCONTROL_SLOW_BRIDGE,
-  SYSCON_CLKCONTROL_UART,
-  SYSCON_CLKCONTROL_BTR,
-  SYSCON_CLKCONTROL_EH,
-  SYSCON_CLKCONTROL_GPIO,
-  SYSCON_CLKCONTROL_KEYPAD,
-  SYSCON_CLKCONTROL_APP_TIMER,
-  SYSCON_CLKCONTROL_ACC_TIMER,
-  SYSCON_CLKCONTROL_FAST_BRIDGE,
-  SYSCON_CLKCONTROL_I2C0,
-  SYSCON_CLKCONTROL_I2C1,
-  SYSCON_CLKCONTROL_I2S0,
-  SYSCON_CLKCONTROL_I2S1,
-  SYSCON_CLKCONTROL_MMC,
-  SYSCON_CLKCONTROL_SPI,
-  SYSCON_CLKCONTROL_I2S0_CORE,
-  SYSCON_CLKCONTROL_I2S1_CORE,
-  SYSCON_CLKCONTROL_UART1,
-  SYSCON_CLKCONTROL_AAIF,
-  SYSCON_CLKCONTROL_AHB,
-  SYSCON_CLKCONTROL_APEX,
-  SYSCON_CLKCONTROL_CPU,
-  SYSCON_CLKCONTROL_DMA,
-  SYSCON_CLKCONTROL_EMIF,
-  SYSCON_CLKCONTROL_NAND_IF,
-  SYSCON_CLKCONTROL_VIDEO_ENC,
-  SYSCON_CLKCONTROL_XGAM,
-  SYSCON_CLKCONTROL_SEMI,
-  SYSCON_CLKCONTROL_AHB_SUBSYS,
-  SYSCON_CLKCONTROL_MSPRO
-};
-
-enum syscon_sysclk_mode {
-  SYSCON_SYSCLK_DISABLED,
-  SYSCON_SYSCLK_M_CLK,
-  SYSCON_SYSCLK_ACC_FSM,
-  SYSCON_SYSCLK_PLL60_48,
-  SYSCON_SYSCLK_PLL60_60,
-  SYSCON_SYSCLK_ACC_PLL208,
-  SYSCON_SYSCLK_APP_PLL13,
-  SYSCON_SYSCLK_APP_FSM,
-  SYSCON_SYSCLK_RTC,
-  SYSCON_SYSCLK_APP_PLL208
-};
-
-enum syscon_sysclk_req {
-  SYSCON_SYSCLKREQ_DISABLED,
-  SYSCON_SYSCLKREQ_ACTIVE_LOW,
-  SYSCON_SYSCLKREQ_MONITOR
-};
-
-enum syscon_clk_mode {
-  SYSCON_CLKMODE_OFF,
-  SYSCON_CLKMODE_DEFAULT,
-  SYSCON_CLKMODE_LOW,
-  SYSCON_CLKMODE_MEDIUM,
-  SYSCON_CLKMODE_HIGH,
-  SYSCON_CLKMODE_PERMANENT,
-  SYSCON_CLKMODE_ON,
-};
-
-enum syscon_call_mode {
-  SYSCON_CLKCALL_NOWAIT,
-  SYSCON_CLKCALL_WAIT,
-};
-
-int syscon_dc_on(bool keep_power_on);
-int syscon_set_busmaster_active_state(enum syscon_busmaster busmaster,
-				      bool active);
-bool syscon_get_busmaster_active_state(void);
-int syscon_set_sleep_mask(enum syscon_clk,
-			  bool sleep_ctrl);
-int syscon_config_sysclk(u32 sysclk,
-			 enum syscon_sysclk_mode sysclkmode,
-			 bool inverse,
-			 u32 divisor,
-			 enum syscon_sysclk_req sysclkreq);
-bool syscon_can_turn_off_semi_clock(void);
-
-/* This function is restricted to core.c */
-int syscon_request_normal_power(bool req);
-
-/* This function is restricted to be used by platform_speed.c */
-int syscon_speed_request(enum syscon_call_mode wait_mode,
-			 enum syscon_clk_mode req_clk_mode);
-#endif /* __MACH_SYSCON_H */
diff --git a/arch/arm/mach-u300/regulator.c b/arch/arm/mach-u300/regulator.c
index bbda954..ab7d7a5 100644
--- a/arch/arm/mach-u300/regulator.c
+++ b/arch/arm/mach-u300/regulator.c
@@ -17,9 +17,12 @@ 
 #include <linux/regulator/consumer.h>
 /* Those are just for writing in syscon */
 #include <linux/io.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <mach/syscon.h>
+#include <mach/u300-regs.h>
+
+/* Power Management Control 16bit (R/W) */
+#define U300_SYSCON_PMCR					(0x50)
+#define U300_SYSCON_PMCR_DCON_ENABLE				(0x0002)
+#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE			(0x0001)
 
 /*
  * Regulators that power the board and chip and which are
diff --git a/drivers/clk/clk-u300.c b/drivers/clk/clk-u300.c
index a15f792..a41e42e 100644
--- a/drivers/clk/clk-u300.c
+++ b/drivers/clk/clk-u300.c
@@ -11,7 +11,348 @@ 
 #include <linux/io.h>
 #include <linux/clk-provider.h>
 #include <linux/spinlock.h>
-#include <mach/syscon.h>
+
+/* APP side SYSCON registers */
+/* CLK Control Register 16bit (R/W) */
+#define U300_SYSCON_CCR						(0x0000)
+#define U300_SYSCON_CCR_I2S1_USE_VCXO				(0x0040)
+#define U300_SYSCON_CCR_I2S0_USE_VCXO				(0x0020)
+#define U300_SYSCON_CCR_TURN_VCXO_ON				(0x0008)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK			(0x0007)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER		(0x04)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW			(0x03)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE		(0x02)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH			(0x01)
+#define U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST			(0x00)
+/* CLK Status Register 16bit (R/W) */
+#define U300_SYSCON_CSR						(0x0004)
+#define U300_SYSCON_CSR_PLL208_LOCK_IND				(0x0002)
+#define U300_SYSCON_CSR_PLL13_LOCK_IND				(0x0001)
+/* Reset lines for SLOW devices 16bit (R/W) */
+#define U300_SYSCON_RSR						(0x0014)
+#define U300_SYSCON_RSR_PPM_RESET_EN				(0x0200)
+#define U300_SYSCON_RSR_ACC_TMR_RESET_EN			(0x0100)
+#define U300_SYSCON_RSR_APP_TMR_RESET_EN			(0x0080)
+#define U300_SYSCON_RSR_RTC_RESET_EN				(0x0040)
+#define U300_SYSCON_RSR_KEYPAD_RESET_EN				(0x0020)
+#define U300_SYSCON_RSR_GPIO_RESET_EN				(0x0010)
+#define U300_SYSCON_RSR_EH_RESET_EN				(0x0008)
+#define U300_SYSCON_RSR_BTR_RESET_EN				(0x0004)
+#define U300_SYSCON_RSR_UART_RESET_EN				(0x0002)
+#define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN			(0x0001)
+/* Reset lines for FAST devices 16bit (R/W) */
+#define U300_SYSCON_RFR						(0x0018)
+#define U300_SYSCON_RFR_UART1_RESET_ENABLE			(0x0080)
+#define U300_SYSCON_RFR_SPI_RESET_ENABLE			(0x0040)
+#define U300_SYSCON_RFR_MMC_RESET_ENABLE			(0x0020)
+#define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE			(0x0010)
+#define U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE			(0x0008)
+#define U300_SYSCON_RFR_I2C1_RESET_ENABLE			(0x0004)
+#define U300_SYSCON_RFR_I2C0_RESET_ENABLE			(0x0002)
+#define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE		(0x0001)
+/* Reset lines for the rest of the peripherals 16bit (R/W) */
+#define U300_SYSCON_RRR						(0x001c)
+#define U300_SYSCON_RRR_CDS_RESET_EN				(0x4000)
+#define U300_SYSCON_RRR_ISP_RESET_EN				(0x2000)
+#define U300_SYSCON_RRR_INTCON_RESET_EN				(0x1000)
+#define U300_SYSCON_RRR_MSPRO_RESET_EN				(0x0800)
+#define U300_SYSCON_RRR_XGAM_RESET_EN				(0x0100)
+#define U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN			(0x0080)
+#define U300_SYSCON_RRR_NANDIF_RESET_EN				(0x0040)
+#define U300_SYSCON_RRR_EMIF_RESET_EN				(0x0020)
+#define U300_SYSCON_RRR_DMAC_RESET_EN				(0x0010)
+#define U300_SYSCON_RRR_CPU_RESET_EN				(0x0008)
+#define U300_SYSCON_RRR_APEX_RESET_EN				(0x0004)
+#define U300_SYSCON_RRR_AHB_RESET_EN				(0x0002)
+#define U300_SYSCON_RRR_AAIF_RESET_EN				(0x0001)
+/* Clock enable for SLOW peripherals 16bit (R/W) */
+#define U300_SYSCON_CESR					(0x0020)
+#define U300_SYSCON_CESR_PPM_CLK_EN				(0x0200)
+#define U300_SYSCON_CESR_ACC_TMR_CLK_EN				(0x0100)
+#define U300_SYSCON_CESR_APP_TMR_CLK_EN				(0x0080)
+#define U300_SYSCON_CESR_KEYPAD_CLK_EN				(0x0040)
+#define U300_SYSCON_CESR_GPIO_CLK_EN				(0x0010)
+#define U300_SYSCON_CESR_EH_CLK_EN				(0x0008)
+#define U300_SYSCON_CESR_BTR_CLK_EN				(0x0004)
+#define U300_SYSCON_CESR_UART_CLK_EN				(0x0002)
+#define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN			(0x0001)
+/* Clock enable for FAST peripherals 16bit (R/W) */
+#define U300_SYSCON_CEFR					(0x0024)
+#define U300_SYSCON_CEFR_UART1_CLK_EN				(0x0200)
+#define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN			(0x0100)
+#define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN			(0x0080)
+#define U300_SYSCON_CEFR_SPI_CLK_EN				(0x0040)
+#define U300_SYSCON_CEFR_MMC_CLK_EN				(0x0020)
+#define U300_SYSCON_CEFR_I2S1_CLK_EN				(0x0010)
+#define U300_SYSCON_CEFR_I2S0_CLK_EN				(0x0008)
+#define U300_SYSCON_CEFR_I2C1_CLK_EN				(0x0004)
+#define U300_SYSCON_CEFR_I2C0_CLK_EN				(0x0002)
+#define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN			(0x0001)
+/* Clock enable for the rest of the peripherals 16bit (R/W) */
+#define U300_SYSCON_CERR					(0x0028)
+#define U300_SYSCON_CERR_CDS_CLK_EN				(0x2000)
+#define U300_SYSCON_CERR_ISP_CLK_EN				(0x1000)
+#define U300_SYSCON_CERR_MSPRO_CLK_EN				(0x0800)
+#define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN		(0x0400)
+#define U300_SYSCON_CERR_SEMI_CLK_EN				(0x0200)
+#define U300_SYSCON_CERR_XGAM_CLK_EN				(0x0100)
+#define U300_SYSCON_CERR_VIDEO_ENC_CLK_EN			(0x0080)
+#define U300_SYSCON_CERR_NANDIF_CLK_EN				(0x0040)
+#define U300_SYSCON_CERR_EMIF_CLK_EN				(0x0020)
+#define U300_SYSCON_CERR_DMAC_CLK_EN				(0x0010)
+#define U300_SYSCON_CERR_CPU_CLK_EN				(0x0008)
+#define U300_SYSCON_CERR_APEX_CLK_EN				(0x0004)
+#define U300_SYSCON_CERR_AHB_CLK_EN				(0x0002)
+#define U300_SYSCON_CERR_AAIF_CLK_EN				(0x0001)
+/* Single block clock enable 16bit (-/W) */
+#define U300_SYSCON_SBCER					(0x002c)
+#define U300_SYSCON_SBCER_PPM_CLK_EN				(0x0009)
+#define U300_SYSCON_SBCER_ACC_TMR_CLK_EN			(0x0008)
+#define U300_SYSCON_SBCER_APP_TMR_CLK_EN			(0x0007)
+#define U300_SYSCON_SBCER_KEYPAD_CLK_EN				(0x0006)
+#define U300_SYSCON_SBCER_GPIO_CLK_EN				(0x0004)
+#define U300_SYSCON_SBCER_EH_CLK_EN				(0x0003)
+#define U300_SYSCON_SBCER_BTR_CLK_EN				(0x0002)
+#define U300_SYSCON_SBCER_UART_CLK_EN				(0x0001)
+#define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN			(0x0000)
+#define U300_SYSCON_SBCER_UART1_CLK_EN				(0x0019)
+#define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN			(0x0018)
+#define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN			(0x0017)
+#define U300_SYSCON_SBCER_SPI_CLK_EN				(0x0016)
+#define U300_SYSCON_SBCER_MMC_CLK_EN				(0x0015)
+#define U300_SYSCON_SBCER_I2S1_CLK_EN				(0x0014)
+#define U300_SYSCON_SBCER_I2S0_CLK_EN				(0x0013)
+#define U300_SYSCON_SBCER_I2C1_CLK_EN				(0x0012)
+#define U300_SYSCON_SBCER_I2C0_CLK_EN				(0x0011)
+#define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN			(0x0010)
+#define U300_SYSCON_SBCER_CDS_CLK_EN				(0x002D)
+#define U300_SYSCON_SBCER_ISP_CLK_EN				(0x002C)
+#define U300_SYSCON_SBCER_MSPRO_CLK_EN				(0x002B)
+#define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN		(0x002A)
+#define U300_SYSCON_SBCER_SEMI_CLK_EN				(0x0029)
+#define U300_SYSCON_SBCER_XGAM_CLK_EN				(0x0028)
+#define U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN			(0x0027)
+#define U300_SYSCON_SBCER_NANDIF_CLK_EN				(0x0026)
+#define U300_SYSCON_SBCER_EMIF_CLK_EN				(0x0025)
+#define U300_SYSCON_SBCER_DMAC_CLK_EN				(0x0024)
+#define U300_SYSCON_SBCER_CPU_CLK_EN				(0x0023)
+#define U300_SYSCON_SBCER_APEX_CLK_EN				(0x0022)
+#define U300_SYSCON_SBCER_AHB_CLK_EN				(0x0021)
+#define U300_SYSCON_SBCER_AAIF_CLK_EN				(0x0020)
+/* Single block clock disable 16bit (-/W) */
+#define U300_SYSCON_SBCDR					(0x0030)
+/* Same values as above for SBCER */
+/* Clock force SLOW peripherals 16bit (R/W) */
+#define U300_SYSCON_CFSR					(0x003c)
+#define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN			(0x0200)
+#define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN			(0x0100)
+#define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN			(0x0080)
+#define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN			(0x0020)
+#define U300_SYSCON_CFSR_GPIO_CLK_FORCE_EN			(0x0010)
+#define U300_SYSCON_CFSR_EH_CLK_FORCE_EN			(0x0008)
+#define U300_SYSCON_CFSR_BTR_CLK_FORCE_EN			(0x0004)
+#define U300_SYSCON_CFSR_UART_CLK_FORCE_EN			(0x0002)
+#define U300_SYSCON_CFSR_SLOW_BRIDGE_CLK_FORCE_EN		(0x0001)
+/* Clock force FAST peripherals 16bit (R/W) */
+#define U300_SYSCON_CFFR					(0x40)
+/* Values not defined. Define if you want to use them. */
+/* Clock force the rest of the peripherals 16bit (R/W) */
+#define U300_SYSCON_CFRR					(0x44)
+#define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN			(0x2000)
+#define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN			(0x1000)
+#define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN			(0x0800)
+#define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN		(0x0400)
+#define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN			(0x0200)
+#define U300_SYSCON_CFRR_XGAM_CLK_FORCE_EN			(0x0100)
+#define U300_SYSCON_CFRR_VIDEO_ENC_CLK_FORCE_EN			(0x0080)
+#define U300_SYSCON_CFRR_NANDIF_CLK_FORCE_EN			(0x0040)
+#define U300_SYSCON_CFRR_EMIF_CLK_FORCE_EN			(0x0020)
+#define U300_SYSCON_CFRR_DMAC_CLK_FORCE_EN			(0x0010)
+#define U300_SYSCON_CFRR_CPU_CLK_FORCE_EN			(0x0008)
+#define U300_SYSCON_CFRR_APEX_CLK_FORCE_EN			(0x0004)
+#define U300_SYSCON_CFRR_AHB_CLK_FORCE_EN			(0x0002)
+#define U300_SYSCON_CFRR_AAIF_CLK_FORCE_EN			(0x0001)
+/* PLL208 Frequency Control 16bit (R/W) */
+#define U300_SYSCON_PFCR					(0x48)
+#define U300_SYSCON_PFCR_DPLL_MULT_NUM				(0x000F)
+/* Power Management Control 16bit (R/W) */
+#define U300_SYSCON_PMCR					(0x50)
+#define U300_SYSCON_PMCR_DCON_ENABLE				(0x0002)
+#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE			(0x0001)
+/* Reset Out 16bit (R/W) */
+#define U300_SYSCON_RCR						(0x6c)
+#define U300_SYSCON_RCR_RESOUT0_RST_N_DISABLE			(0x0001)
+/* EMIF Slew Rate Control 16bit (R/W) */
+#define U300_SYSCON_SRCLR					(0x70)
+#define U300_SYSCON_SRCLR_MASK					(0x03FF)
+#define U300_SYSCON_SRCLR_VALUE					(0x03FF)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_B			(0x0200)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_A			(0x0100)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_B			(0x0080)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_A			(0x0040)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_B			(0x0020)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_A			(0x0010)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_B			(0x0008)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_A			(0x0004)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_B			(0x0002)
+#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_A			(0x0001)
+/* EMIF Clock Control Register 16bit (R/W) */
+#define U300_SYSCON_ECCR					(0x0078)
+#define U300_SYSCON_ECCR_MASK					(0x000F)
+#define U300_SYSCON_ECCR_EMIF_1_STATIC_CLK_EN_N_DISABLE		(0x0008)
+#define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE	(0x0004)
+#define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE		(0x0002)
+#define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE		(0x0001)
+/* MMC/MSPRO frequency divider register 0 16bit (R/W) */
+#define U300_SYSCON_MMF0R					(0x90)
+#define U300_SYSCON_MMF0R_MASK					(0x00FF)
+#define U300_SYSCON_MMF0R_FREQ_0_HIGH_MASK			(0x00F0)
+#define U300_SYSCON_MMF0R_FREQ_0_LOW_MASK			(0x000F)
+/* MMC/MSPRO frequency divider register 1 16bit (R/W) */
+#define U300_SYSCON_MMF1R					(0x94)
+#define U300_SYSCON_MMF1R_MASK					(0x00FF)
+#define U300_SYSCON_MMF1R_FREQ_1_HIGH_MASK			(0x00F0)
+#define U300_SYSCON_MMF1R_FREQ_1_LOW_MASK			(0x000F)
+/* Clock control for the MMC and MSPRO blocks 16bit (R/W) */
+#define U300_SYSCON_MMCR					(0x9C)
+#define U300_SYSCON_MMCR_MASK					(0x0003)
+#define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE			(0x0002)
+#define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE			(0x0001)
+/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */
+#define U300_SYSCON_S0CCR					(0x120)
+#define U300_SYSCON_S0CCR_FIELD_MASK				(0x43FF)
+#define U300_SYSCON_S0CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S0CCR_CLOCK_REQ_MONITOR			(0x2000)
+#define U300_SYSCON_S0CCR_CLOCK_INV				(0x0200)
+#define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK			(0x01E0)
+#define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK			(0x001E)
+#define U300_SYSCON_S0CCR_CLOCK_ENABLE				(0x0001)
+#define U300_SYSCON_S0CCR_SEL_MCLK				(0x8<<1)
+#define U300_SYSCON_S0CCR_SEL_ACC_FSM_CLK			(0xA<<1)
+#define U300_SYSCON_S0CCR_SEL_PLL60_48_CLK			(0xC<<1)
+#define U300_SYSCON_S0CCR_SEL_PLL60_60_CLK			(0xD<<1)
+#define U300_SYSCON_S0CCR_SEL_ACC_PLL208_CLK			(0xE<<1)
+#define U300_SYSCON_S0CCR_SEL_APP_PLL13_CLK			(0x0<<1)
+#define U300_SYSCON_S0CCR_SEL_APP_FSM_CLK			(0x2<<1)
+#define U300_SYSCON_S0CCR_SEL_RTC_CLK				(0x4<<1)
+#define U300_SYSCON_S0CCR_SEL_APP_PLL208_CLK			(0x6<<1)
+/* SYS_1_CLK_CONTROL second clock control 16 bit (R/W) */
+#define U300_SYSCON_S1CCR					(0x124)
+#define U300_SYSCON_S1CCR_FIELD_MASK				(0x43FF)
+#define U300_SYSCON_S1CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S1CCR_CLOCK_REQ_MONITOR			(0x2000)
+#define U300_SYSCON_S1CCR_CLOCK_INV				(0x0200)
+#define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK			(0x01E0)
+#define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK			(0x001E)
+#define U300_SYSCON_S1CCR_CLOCK_ENABLE				(0x0001)
+#define U300_SYSCON_S1CCR_SEL_MCLK				(0x8<<1)
+#define U300_SYSCON_S1CCR_SEL_ACC_FSM_CLK			(0xA<<1)
+#define U300_SYSCON_S1CCR_SEL_PLL60_48_CLK			(0xC<<1)
+#define U300_SYSCON_S1CCR_SEL_PLL60_60_CLK			(0xD<<1)
+#define U300_SYSCON_S1CCR_SEL_ACC_PLL208_CLK			(0xE<<1)
+#define U300_SYSCON_S1CCR_SEL_ACC_PLL13_CLK			(0x0<<1)
+#define U300_SYSCON_S1CCR_SEL_APP_FSM_CLK			(0x2<<1)
+#define U300_SYSCON_S1CCR_SEL_RTC_CLK				(0x4<<1)
+#define U300_SYSCON_S1CCR_SEL_APP_PLL208_CLK			(0x6<<1)
+/* SYS_2_CLK_CONTROL third clock contol 16 bit (R/W) */
+#define U300_SYSCON_S2CCR					(0x128)
+#define U300_SYSCON_S2CCR_FIELD_MASK				(0xC3FF)
+#define U300_SYSCON_S2CCR_CLK_STEAL				(0x8000)
+#define U300_SYSCON_S2CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S2CCR_CLOCK_REQ_MONITOR			(0x2000)
+#define U300_SYSCON_S2CCR_CLOCK_INV				(0x0200)
+#define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK			(0x01E0)
+#define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK			(0x001E)
+#define U300_SYSCON_S2CCR_CLOCK_ENABLE				(0x0001)
+#define U300_SYSCON_S2CCR_SEL_MCLK				(0x8<<1)
+#define U300_SYSCON_S2CCR_SEL_ACC_FSM_CLK			(0xA<<1)
+#define U300_SYSCON_S2CCR_SEL_PLL60_48_CLK			(0xC<<1)
+#define U300_SYSCON_S2CCR_SEL_PLL60_60_CLK			(0xD<<1)
+#define U300_SYSCON_S2CCR_SEL_ACC_PLL208_CLK			(0xE<<1)
+#define U300_SYSCON_S2CCR_SEL_ACC_PLL13_CLK			(0x0<<1)
+#define U300_SYSCON_S2CCR_SEL_APP_FSM_CLK			(0x2<<1)
+#define U300_SYSCON_S2CCR_SEL_RTC_CLK				(0x4<<1)
+#define U300_SYSCON_S2CCR_SEL_APP_PLL208_CLK			(0x6<<1)
+/* SC_PLL_IRQ_CONTROL 16bit (R/W) */
+#define U300_SYSCON_PICR					(0x0130)
+#define U300_SYSCON_PICR_MASK					(0x00FF)
+#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_LOW_ENABLE		(0x0080)
+#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_HIGH_ENABLE		(0x0040)
+#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_LOW_ENABLE		(0x0020)
+#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_HIGH_ENABLE		(0x0010)
+#define U300_SYSCON_PICR_IRQMASK_PLL13_UNLOCK_ENABLE		(0x0008)
+#define U300_SYSCON_PICR_IRQMASK_PLL13_LOCK_ENABLE		(0x0004)
+#define U300_SYSCON_PICR_IRQMASK_PLL208_UNLOCK_ENABLE		(0x0002)
+#define U300_SYSCON_PICR_IRQMASK_PLL208_LOCK_ENABLE		(0x0001)
+/* SC_PLL_IRQ_STATUS 16 bit (R/-) */
+#define U300_SYSCON_PISR					(0x0134)
+#define U300_SYSCON_PISR_MASK					(0x000F)
+#define U300_SYSCON_PISR_PLL13_UNLOCK_IND			(0x0008)
+#define U300_SYSCON_PISR_PLL13_LOCK_IND				(0x0004)
+#define U300_SYSCON_PISR_PLL208_UNLOCK_IND			(0x0002)
+#define U300_SYSCON_PISR_PLL208_LOCK_IND			(0x0001)
+/* SC_PLL_IRQ_CLEAR 16 bit (-/W) */
+#define U300_SYSCON_PICLR					(0x0138)
+#define U300_SYSCON_PICLR_MASK					(0x000F)
+#define U300_SYSCON_PICLR_RWMASK				(0x0000)
+#define U300_SYSCON_PICLR_PLL13_UNLOCK_SC			(0x0008)
+#define U300_SYSCON_PICLR_PLL13_LOCK_SC				(0x0004)
+#define U300_SYSCON_PICLR_PLL208_UNLOCK_SC			(0x0002)
+#define U300_SYSCON_PICLR_PLL208_LOCK_SC			(0x0001)
+/* Clock activity observability register 0 */
+#define U300_SYSCON_C0OAR					(0x140)
+#define U300_SYSCON_C0OAR_MASK					(0xFFFF)
+#define U300_SYSCON_C0OAR_VALUE					(0xFFFF)
+#define U300_SYSCON_C0OAR_BT_H_CLK				(0x8000)
+#define U300_SYSCON_C0OAR_ASPB_P_CLK				(0x4000)
+#define U300_SYSCON_C0OAR_APP_SEMI_H_CLK			(0x2000)
+#define U300_SYSCON_C0OAR_APP_SEMI_CLK				(0x1000)
+#define U300_SYSCON_C0OAR_APP_MMC_MSPRO_CLK			(0x0800)
+#define U300_SYSCON_C0OAR_APP_I2S1_CLK				(0x0400)
+#define U300_SYSCON_C0OAR_APP_I2S0_CLK				(0x0200)
+#define U300_SYSCON_C0OAR_APP_CPU_CLK				(0x0100)
+#define U300_SYSCON_C0OAR_APP_52_CLK				(0x0080)
+#define U300_SYSCON_C0OAR_APP_208_CLK				(0x0040)
+#define U300_SYSCON_C0OAR_APP_104_CLK				(0x0020)
+#define U300_SYSCON_C0OAR_APEX_CLK				(0x0010)
+#define U300_SYSCON_C0OAR_AHPB_M_H_CLK				(0x0008)
+#define U300_SYSCON_C0OAR_AHB_CLK				(0x0004)
+#define U300_SYSCON_C0OAR_AFPB_P_CLK				(0x0002)
+#define U300_SYSCON_C0OAR_AAIF_CLK				(0x0001)
+/* Clock activity observability register 1 */
+#define U300_SYSCON_C1OAR					(0x144)
+#define U300_SYSCON_C1OAR_MASK					(0x3FFE)
+#define U300_SYSCON_C1OAR_VALUE					(0x3FFE)
+#define U300_SYSCON_C1OAR_NFIF_F_CLK				(0x2000)
+#define U300_SYSCON_C1OAR_MSPRO_CLK				(0x1000)
+#define U300_SYSCON_C1OAR_MMC_P_CLK				(0x0800)
+#define U300_SYSCON_C1OAR_MMC_CLK				(0x0400)
+#define U300_SYSCON_C1OAR_KP_P_CLK				(0x0200)
+#define U300_SYSCON_C1OAR_I2C1_P_CLK				(0x0100)
+#define U300_SYSCON_C1OAR_I2C0_P_CLK				(0x0080)
+#define U300_SYSCON_C1OAR_GPIO_CLK				(0x0040)
+#define U300_SYSCON_C1OAR_EMIF_MPMC_CLK				(0x0020)
+#define U300_SYSCON_C1OAR_EMIF_H_CLK				(0x0010)
+#define U300_SYSCON_C1OAR_EVHIST_CLK				(0x0008)
+#define U300_SYSCON_C1OAR_PPM_CLK				(0x0004)
+#define U300_SYSCON_C1OAR_DMA_CLK				(0x0002)
+/* Clock activity observability register 2 */
+#define U300_SYSCON_C2OAR					(0x148)
+#define U300_SYSCON_C2OAR_MASK					(0x0FFF)
+#define U300_SYSCON_C2OAR_VALUE					(0x0FFF)
+#define U300_SYSCON_C2OAR_XGAM_CDI_CLK				(0x0800)
+#define U300_SYSCON_C2OAR_XGAM_CLK				(0x0400)
+#define U300_SYSCON_C2OAR_VC_H_CLK				(0x0200)
+#define U300_SYSCON_C2OAR_VC_CLK				(0x0100)
+#define U300_SYSCON_C2OAR_UA_P_CLK				(0x0080)
+#define U300_SYSCON_C2OAR_TMR1_CLK				(0x0040)
+#define U300_SYSCON_C2OAR_TMR0_CLK				(0x0020)
+#define U300_SYSCON_C2OAR_SPI_P_CLK				(0x0010)
+#define U300_SYSCON_C2OAR_PCM_I2S1_CORE_CLK			(0x0008)
+#define U300_SYSCON_C2OAR_PCM_I2S1_CLK				(0x0004)
+#define U300_SYSCON_C2OAR_PCM_I2S0_CORE_CLK			(0x0002)
+#define U300_SYSCON_C2OAR_PCM_I2S0_CLK				(0x0001)
+
 
 /*
  * The clocking hierarchy currently looks like this.