[V2] ARM: bcm281xx: Add L2 support for Rev A2 chips

Message ID	1367542653-955-1-git-send-email-csd@broadcom.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org> From: "Christian Daudt" <csd@broadcom.com> To: "Russell King" <linux@arm.linux.org.uk>, "John Stultz" <john.stultz@linaro.org>, "Thomas Gleixner" <tglx@linutronix.de>, "Olof Johansson" <olof@lixom.net>, "Arnd Bergmann" <arnd@arndb.de>, "Stephen Warren" <swarren@wwwdotorg.org>, "Will Deacon" <will.deacon@arm.com> Subject: [PATCH V2] ARM: bcm281xx: Add L2 support for Rev A2 chips Date: Thu, 2 May 2013 17:57:33 -0700 Message-ID: <1367542653-955-1-git-send-email-csd@broadcom.com> MIME-Version: 1.0 summary: Content analysis details: (-6.7 points) pts rule name description ---- ---------------------- -------------------------------------------------- -2.3 RCVD_IN_DNSWL_MED RBL: Sender listed at http://www.dnswl.org/, medium trust [216.31.210.18 listed in list.dnswl.org] -2.5 RP_MATCHES_RCVD Envelope sender domain matches handover relay domain -1.9 BAYES_00 BODY: Bayes spam probability is 0 to 1% [score: 0.0000] 0.0 T_HDRS_LCASE Odd capitalization of message header Cc: Josh Cartwright <josh.cartwright@ni.com>, Yehuda Yitschak <yehuday@marvell.com>, linux-doc@vger.kernel.org, Christian Daudt <csd@broadcom.com>, devicetree-discuss@lists.ozlabs.org, linux-kernel@vger.kernel.org, Rob Herring <rob.herring@calxeda.com>, csd_b@daudt.org, "arm@kernel.org" <arm@kernel.org>, Rob Landley <rob@landley.net>, Gregory CLEMENT <gregory.clement@free-electrons.com>, linux-arm-kernel@lists.infradead.org Precedence: list Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org

diff --git a/Documentation/devicetree/bindings/arm/l2cc.txt b/Documentation/devicetree/bindings/arm/l2cc.txt index cbef09b..69ddf9f 100644 --- a/Documentation/devicetree/bindings/arm/l2cc.txt +++ b/Documentation/devicetree/bindings/arm/l2cc.txt @@ -16,6 +16,9 @@ Required properties: performs the same operation). "marvell,"aurora-outer-cache: Marvell Controller designed to be compatible with the ARM one with outer cache mode. + "bcm,bcm11351-a2-pl310-cache": For Broadcom bcm11351 chipset where an + offset needs to be added to the address before passing down to the L2 + cache controller - cache-unified : Specifies the cache is a unified cache. - cache-level : Should be set to 2 for a level 2 cache. - reg : Physical base address and size of cache controller's memory mapped diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index 41b2c6c..5e48c85 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -47,10 +47,10 @@ }; L2: l2-cache { - compatible = "arm,pl310-cache"; - reg = <0x3ff20000 0x1000>; - cache-unified; - cache-level = <2>; + compatible = "bcm,bcm11351-a2-pl310-cache"; + reg = <0x3ff20000 0x1000>; + cache-unified; + cache-level = <2>; }; timer@35006000 { diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index c465fac..d70e0ab 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -523,6 +523,147 @@ static void aurora_flush_range(unsigned long start, unsigned long end) } } +/* + * For certain Broadcom SoCs, depending on the address range, different offsets + * need to be added to the address before passing it to L2 for + * invalidation/clean/flush + * + * Section Address Range Offset EMI + * 1 0x00000000 - 0x3FFFFFFF 0x80000000 VC + * 2 0x40000000 - 0xBFFFFFFF 0x40000000 SYS + * 3 0xC0000000 - 0xFFFFFFFF 0x80000000 VC + * + * When the start and end addresses have crossed two different sections, we + * need to break the L2 operation into two, each within its own section. + * For example, if we need to invalidate addresses starts at 0xBFFF0000 and + * ends at 0xC0001000, we need do invalidate 1) 0xBFFF0000 - 0xBFFFFFFF and 2) + * 0xC0000000 - 0xC0001000 + * + * Note 1: + * By breaking a single L2 operation into two, we may potentially suffer some + * performance hit, but keep in mind the cross section case is very rare + * + * Note 2: + * We do not need to handle the case when the start address is in + * Section 1 and the end address is in Section 3, since it is not a valid use + * case + * + * Note 3: + * Section 1 in practical terms can no longer be used on rev A2. Because of + * that the code does not need to handle section 1 at all. + * + */ +#define BCM_SYS_EMI_START_ADDR 0x40000000UL +#define BCM_VC_EMI_SEC3_START_ADDR 0xC0000000UL + +#define BCM_SYS_EMI_OFFSET 0x40000000UL +#define BCM_VC_EMI_OFFSET 0x80000000UL + +static inline int bcm_addr_is_sys_emi(unsigned long addr) +{ + return (addr >= BCM_SYS_EMI_START_ADDR) && + (addr < BCM_VC_EMI_SEC3_START_ADDR); +} + +static inline unsigned long bcm_l2_phys_addr(unsigned long addr) +{ + if (bcm_addr_is_sys_emi(addr)) + return addr + BCM_SYS_EMI_OFFSET; + else + return addr + BCM_VC_EMI_OFFSET; +} + +static void bcm_inv_range(unsigned long start, unsigned long end) +{ + unsigned long new_start, new_end; + + BUG_ON(start < BCM_SYS_EMI_START_ADDR); + + if (unlikely(end <= start)) + return; + + new_start = bcm_l2_phys_addr(start); + new_end = bcm_l2_phys_addr(end); + + /* normal case, no cross section between start and end */ + if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) { + l2x0_inv_range(new_start, new_end); + return; + } + + /* They cross sections, so it can only be a cross from section + * 2 to section 3 + */ + l2x0_inv_range(new_start, + bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1)); + l2x0_inv_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), + new_end); +} + +static void bcm_clean_range(unsigned long start, unsigned long end) +{ + unsigned long new_start, new_end; + + BUG_ON(start < BCM_SYS_EMI_START_ADDR); + + if (unlikely(end <= start)) + return; + + if ((end - start) >= l2x0_size) { + l2x0_clean_all(); + return; + } + + new_start = bcm_l2_phys_addr(start); + new_end = bcm_l2_phys_addr(end); + + /* normal case, no cross section between start and end */ + if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) { + l2x0_clean_range(new_start, new_end); + return; + } + + /* They cross sections, so it can only be a cross from section + * 2 to section 3 + */ + l2x0_clean_range(new_start, + bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1)); + l2x0_clean_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), + new_end); +} + +static void bcm_flush_range(unsigned long start, unsigned long end) +{ + unsigned long new_start, new_end; + + BUG_ON(start < BCM_SYS_EMI_START_ADDR); + + if (unlikely(end <= start)) + return; + + if ((end - start) >= l2x0_size) { + l2x0_flush_all(); + return; + } + + new_start = bcm_l2_phys_addr(start); + new_end = bcm_l2_phys_addr(end); + + /* normal case, no cross section between start and end */ + if (likely(bcm_addr_is_sys_emi(end) || !bcm_addr_is_sys_emi(start))) { + l2x0_flush_range(new_start, new_end); + return; + } + + /* They cross sections, so it can only be a cross from section + * 2 to section 3 + */ + l2x0_flush_range(new_start, + bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR-1)); + l2x0_flush_range(bcm_l2_phys_addr(BCM_VC_EMI_SEC3_START_ADDR), + new_end); +} + static void __init l2x0_of_setup(const struct device_node *np, u32 *aux_val, u32 *aux_mask) { @@ -765,6 +906,21 @@ static const struct l2x0_of_data aurora_no_outer_data = { }, }; +static const struct l2x0_of_data bcm_l2x0_data = { + .setup = pl310_of_setup, + .save = pl310_save, + .outer_cache = { + .resume = pl310_resume, + .inv_range = bcm_inv_range, + .clean_range = bcm_clean_range, + .flush_range = bcm_flush_range, + .sync = l2x0_cache_sync, + .flush_all = l2x0_flush_all, + .inv_all = l2x0_inv_all, + .disable = l2x0_disable, + }, +}; + static const struct of_device_id l2x0_ids[] __initconst = { { .compatible = "arm,pl310-cache", .data = (void *)&pl310_data }, { .compatible = "arm,l220-cache", .data = (void *)&l2x0_data }, @@ -773,6 +929,8 @@ static const struct of_device_id l2x0_ids[] __initconst = { .data = (void *)&aurora_no_outer_data}, { .compatible = "marvell,aurora-outer-cache", .data = (void *)&aurora_with_outer_data}, + { .compatible = "bcm,bcm11351-a2-pl310-cache", + .data = (void *)&bcm_l2x0_data}, {} };

[V2] ARM: bcm281xx: Add L2 support for Rev A2 chips

Commit Message

Comments

Patch