@@ -58,3 +58,24 @@
wp-gpios = <&gpio1 13 0>;
status = "okay";
};
+
+&weim {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_weim_nor_1>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x08000000 0x08000000>;
+ status = "disabled"; /* pin conflict with SPI NOR */
+
+ nor@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x02000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <2>;
+
+ weim-cs-index = <0>;
+ weim-cs-timing = <0x00620081 0x00000001 0x1C022000
+ 0x0000C000 0x1404a38e 0x00000000>;
+ };
+};
Enable the WEIM NOR for imx6q{dl} boards. For the pin conflict with SPI NOR, its status is set to "disabled". Signed-off-by: Huang Shijie <b32955@freescale.com> --- arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 21 +++++++++++++++++++++ 1 files changed, 21 insertions(+), 0 deletions(-)