Message ID | 1369090911-1479-2-git-send-email-gmbnomis@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On 21 May 2013 01:01, Simon Baatz <gmbnomis@gmail.com> wrote: > In addition to just logging errors encountered during DT parsing or > allocating GPIO slots for CD/WP, mmc_of_parse() now returns with an error. > > In particular, this is needed if the GPIO allocation may return > EPROBE_DEFER. > > Signed-off-by: Simon Baatz <gmbnomis@gmail.com> > --- > > changes in V3: > - Handle EPROBE_DEFER case > > drivers/mmc/core/host.c | 30 +++++++++++++++++++++++++----- > include/linux/mmc/host.h | 2 +- > 2 files changed, 26 insertions(+), 6 deletions(-) > > diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c > index 2a3593d..89f5849 100644 > --- a/drivers/mmc/core/host.c > +++ b/drivers/mmc/core/host.c > @@ -306,7 +306,7 @@ static inline void mmc_host_clk_sysfs_init(struct mmc_host *host) > * parse the properties and set respective generic mmc-host flags and > * parameters. > */ > -void mmc_of_parse(struct mmc_host *host) > +int mmc_of_parse(struct mmc_host *host) > { > struct device_node *np; > u32 bus_width; > @@ -315,7 +315,7 @@ void mmc_of_parse(struct mmc_host *host) > int len, ret, gpio; > > if (!host->parent || !host->parent->of_node) > - return; > + return 0; > > np = host->parent->of_node; > > @@ -338,6 +338,7 @@ void mmc_of_parse(struct mmc_host *host) > default: > dev_err(host->parent, > "Invalid \"bus-width\" value %ud!\n", bus_width); > + return -EINVAL; > } > > /* f_max is obtained from the optional "max-frequency" property */ > @@ -367,18 +368,22 @@ void mmc_of_parse(struct mmc_host *host) > host->caps |= MMC_CAP_NEEDS_POLL; > > gpio = of_get_named_gpio_flags(np, "cd-gpios", 0, &flags); > + if (gpio == -EPROBE_DEFER) > + return gpio; > if (gpio_is_valid(gpio)) { > if (!(flags & OF_GPIO_ACTIVE_LOW)) > gpio_inv_cd = true; > > ret = mmc_gpio_request_cd(host, gpio); > - if (ret < 0) > + if (ret < 0) { > dev_err(host->parent, > "Failed to request CD GPIO #%d: %d!\n", > gpio, ret); > - else > + return ret; > + } else { > dev_info(host->parent, "Got CD GPIO #%d.\n", > gpio); > + } > } > > if (explicit_inv_cd ^ gpio_inv_cd) > @@ -389,14 +394,23 @@ void mmc_of_parse(struct mmc_host *host) > explicit_inv_wp = of_property_read_bool(np, "wp-inverted"); > > gpio = of_get_named_gpio_flags(np, "wp-gpios", 0, &flags); > + if (gpio == -EPROBE_DEFER) { > + ret = -EPROBE_DEFER; > + goto out; > + } > if (gpio_is_valid(gpio)) { > if (!(flags & OF_GPIO_ACTIVE_LOW)) > gpio_inv_wp = true; > > ret = mmc_gpio_request_ro(host, gpio); > - if (ret < 0) > + if (ret < 0) { > dev_err(host->parent, > "Failed to request WP GPIO: %d!\n", ret); > + goto out; > + } else { > + dev_info(host->parent, "Got WP GPIO #%d.\n", > + gpio); > + } > } > if (explicit_inv_wp ^ gpio_inv_wp) > host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; > @@ -413,6 +427,12 @@ void mmc_of_parse(struct mmc_host *host) > host->pm_caps |= MMC_PM_KEEP_POWER; > if (of_find_property(np, "enable-sdio-wakeup", &len)) > host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ; > + > + return 0; > + > +out: > + mmc_gpio_free_cd(host); > + return ret; > } > > EXPORT_SYMBOL(mmc_of_parse); > diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h > index e326ae2..c8c4fbc 100644 > --- a/include/linux/mmc/host.h > +++ b/include/linux/mmc/host.h > @@ -369,7 +369,7 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *); > int mmc_add_host(struct mmc_host *); > void mmc_remove_host(struct mmc_host *); > void mmc_free_host(struct mmc_host *); > -void mmc_of_parse(struct mmc_host *host); > +int mmc_of_parse(struct mmc_host *host); > > static inline void *mmc_priv(struct mmc_host *host) > { > -- > 1.7.9.5 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index 2a3593d..89f5849 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -306,7 +306,7 @@ static inline void mmc_host_clk_sysfs_init(struct mmc_host *host) * parse the properties and set respective generic mmc-host flags and * parameters. */ -void mmc_of_parse(struct mmc_host *host) +int mmc_of_parse(struct mmc_host *host) { struct device_node *np; u32 bus_width; @@ -315,7 +315,7 @@ void mmc_of_parse(struct mmc_host *host) int len, ret, gpio; if (!host->parent || !host->parent->of_node) - return; + return 0; np = host->parent->of_node; @@ -338,6 +338,7 @@ void mmc_of_parse(struct mmc_host *host) default: dev_err(host->parent, "Invalid \"bus-width\" value %ud!\n", bus_width); + return -EINVAL; } /* f_max is obtained from the optional "max-frequency" property */ @@ -367,18 +368,22 @@ void mmc_of_parse(struct mmc_host *host) host->caps |= MMC_CAP_NEEDS_POLL; gpio = of_get_named_gpio_flags(np, "cd-gpios", 0, &flags); + if (gpio == -EPROBE_DEFER) + return gpio; if (gpio_is_valid(gpio)) { if (!(flags & OF_GPIO_ACTIVE_LOW)) gpio_inv_cd = true; ret = mmc_gpio_request_cd(host, gpio); - if (ret < 0) + if (ret < 0) { dev_err(host->parent, "Failed to request CD GPIO #%d: %d!\n", gpio, ret); - else + return ret; + } else { dev_info(host->parent, "Got CD GPIO #%d.\n", gpio); + } } if (explicit_inv_cd ^ gpio_inv_cd) @@ -389,14 +394,23 @@ void mmc_of_parse(struct mmc_host *host) explicit_inv_wp = of_property_read_bool(np, "wp-inverted"); gpio = of_get_named_gpio_flags(np, "wp-gpios", 0, &flags); + if (gpio == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto out; + } if (gpio_is_valid(gpio)) { if (!(flags & OF_GPIO_ACTIVE_LOW)) gpio_inv_wp = true; ret = mmc_gpio_request_ro(host, gpio); - if (ret < 0) + if (ret < 0) { dev_err(host->parent, "Failed to request WP GPIO: %d!\n", ret); + goto out; + } else { + dev_info(host->parent, "Got WP GPIO #%d.\n", + gpio); + } } if (explicit_inv_wp ^ gpio_inv_wp) host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; @@ -413,6 +427,12 @@ void mmc_of_parse(struct mmc_host *host) host->pm_caps |= MMC_PM_KEEP_POWER; if (of_find_property(np, "enable-sdio-wakeup", &len)) host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ; + + return 0; + +out: + mmc_gpio_free_cd(host); + return ret; } EXPORT_SYMBOL(mmc_of_parse); diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index e326ae2..c8c4fbc 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -369,7 +369,7 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *); int mmc_add_host(struct mmc_host *); void mmc_remove_host(struct mmc_host *); void mmc_free_host(struct mmc_host *); -void mmc_of_parse(struct mmc_host *host); +int mmc_of_parse(struct mmc_host *host); static inline void *mmc_priv(struct mmc_host *host) {
In addition to just logging errors encountered during DT parsing or allocating GPIO slots for CD/WP, mmc_of_parse() now returns with an error. In particular, this is needed if the GPIO allocation may return EPROBE_DEFER. Signed-off-by: Simon Baatz <gmbnomis@gmail.com> --- changes in V3: - Handle EPROBE_DEFER case drivers/mmc/core/host.c | 30 +++++++++++++++++++++++++----- include/linux/mmc/host.h | 2 +- 2 files changed, 26 insertions(+), 6 deletions(-)