diff mbox

[2/2] ARM: imx6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority

Message ID 1369919399-24370-2-git-send-email-mpa@pengutronix.de (mailing list archive)
State New, archived
Headers show

Commit Message

Markus Pargmann May 30, 2013, 1:09 p.m. UTC
From: Philipp Zabel <p.zabel@pengutronix.de>

This is needed so that the IPU framebuffer scanout cannot be starved
by VPU or GPU activity.
The Freescale SabreLite and SabreSD boards seem to set this in the boot
rom already, but the documented register reset values do not contain
the necessary settings.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
---
 arch/arm/mach-imx/mach-imx6q.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

Comments

Shawn Guo May 30, 2013, 2:57 p.m. UTC | #1
On Thu, May 30, 2013 at 03:09:59PM +0200, Markus Pargmann wrote:
> From: Philipp Zabel <p.zabel@pengutronix.de>
> 
> This is needed so that the IPU framebuffer scanout cannot be starved
> by VPU or GPU activity.
> The Freescale SabreLite and SabreSD boards seem to set this in the boot
> rom already,

The boot rom is not board specific but SoC, so you meant boot loader?

> but the documented register reset values do not contain
> the necessary settings.
> 
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
> ---
>  arch/arm/mach-imx/mach-imx6q.c | 32 ++++++++++++++++++++++++++++++++
>  1 file changed, 32 insertions(+)
> 
> diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
> index 5536fd8..7bef242 100644
> --- a/arch/arm/mach-imx/mach-imx6q.c
> +++ b/arch/arm/mach-imx/mach-imx6q.c
> @@ -29,6 +29,7 @@
>  #include <linux/regmap.h>
>  #include <linux/micrel_phy.h>
>  #include <linux/mfd/syscon.h>
> +#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
>  #include <asm/hardware/cache-l2x0.h>
>  #include <asm/mach/arch.h>
>  #include <asm/mach/map.h>
> @@ -161,6 +162,36 @@ static void __init imx6q_usb_init(void)
>  	imx_anatop_usb_chrg_detect_disable();
>  }
>  
> +static void __init imx6q_gpr_init(void)
> +{
> +	struct regmap *gpr;
> +
> +	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
> +	if (IS_ERR(gpr)) {
> +		pr_warn("failed to find fsl,imx6q-iomuxc-gpr regmap\n");
> +		return;
> +	}
> +
> +	/* Enable the cacheable attribute of VPU and IPU AXI transactions */
> +	regmap_update_bits(gpr, IOMUXC_GPR4, 0,
> +			IMX6Q_GPR4_VPU_WR_CACHE_SEL |
> +			IMX6Q_GPR4_VPU_RD_CACHE_SEL |
> +			IMX6Q_GPR4_VPU_P_WR_CACHE_VAL |
> +			IMX6Q_GPR4_VPU_P_RD_CACHE_VAL_MASK |
> +			IMX6Q_GPR4_IPU_WR_CACHE_CTL |
> +			IMX6Q_GPR4_IPU_RD_CACHE_CTL);
> +
> +	/* Increase IPU read QoS priority */
> +	regmap_update_bits(gpr, IOMUXC_GPR6,
> +			IMX6Q_GPR6_IPU1_ID00_RD_QOS_MASK |
> +			IMX6Q_GPR6_IPU1_ID01_RD_QOS_MASK,
> +			(0xf << 16) | (0x7 << 20));
> +	regmap_update_bits(gpr, IOMUXC_GPR7,
> +			IMX6Q_GPR7_IPU2_ID00_RD_QOS_MASK |
> +			IMX6Q_GPR7_IPU2_ID01_RD_QOS_MASK,
> +			(0xf << 16) | (0x7 << 20));
> +}
> +
>  static void __init imx6q_init_machine(void)
>  {
>  	if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
> @@ -172,6 +203,7 @@ static void __init imx6q_init_machine(void)
>  	imx6q_pm_init();
>  	imx6q_usb_init();
>  	imx6q_1588_init();
> +	imx6q_gpr_init();

The function imx6q_1588_init() is all about setting up some IOMUXC GPR
bits, so can you consolidate it into imx6q_gpr_init()?

Shawn

>  }
>  
>  #define OCOTP_CFG3			0x440
> -- 
> 1.8.2.1
>
Dirk Behme May 31, 2013, 11:22 a.m. UTC | #2
On 30.05.2013 15:09, Markus Pargmann wrote:
> From: Philipp Zabel <p.zabel@pengutronix.de>
>
> This is needed so that the IPU framebuffer scanout cannot be starved
> by VPU or GPU activity.
> The Freescale SabreLite and SabreSD boards seem to set this in the boot
> rom already, but the documented register reset values do not contain
> the necessary settings.
>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
> ---
>   arch/arm/mach-imx/mach-imx6q.c | 32 ++++++++++++++++++++++++++++++++
>   1 file changed, 32 insertions(+)
>
> diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
> index 5536fd8..7bef242 100644
> --- a/arch/arm/mach-imx/mach-imx6q.c
> +++ b/arch/arm/mach-imx/mach-imx6q.c
> @@ -29,6 +29,7 @@
>   #include <linux/regmap.h>
>   #include <linux/micrel_phy.h>
>   #include <linux/mfd/syscon.h>
> +#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
>   #include <asm/hardware/cache-l2x0.h>
>   #include <asm/mach/arch.h>
>   #include <asm/mach/map.h>
> @@ -161,6 +162,36 @@ static void __init imx6q_usb_init(void)
>   	imx_anatop_usb_chrg_detect_disable();
>   }
>
> +static void __init imx6q_gpr_init(void)
> +{
> +	struct regmap *gpr;
> +
> +	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
> +	if (IS_ERR(gpr)) {
> +		pr_warn("failed to find fsl,imx6q-iomuxc-gpr regmap\n");
> +		return;
> +	}
> +
> +	/* Enable the cacheable attribute of VPU and IPU AXI transactions */
> +	regmap_update_bits(gpr, IOMUXC_GPR4, 0,
> +			IMX6Q_GPR4_VPU_WR_CACHE_SEL |
> +			IMX6Q_GPR4_VPU_RD_CACHE_SEL |
> +			IMX6Q_GPR4_VPU_P_WR_CACHE_VAL |
> +			IMX6Q_GPR4_VPU_P_RD_CACHE_VAL_MASK |
> +			IMX6Q_GPR4_IPU_WR_CACHE_CTL |
> +			IMX6Q_GPR4_IPU_RD_CACHE_CTL);

I have to admit that I don't understand much of this ;) But comparing 
this with the U-Boot settings

http://git.denx.de/?p=u-boot.git;a=blob;f=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg;h=d0f581582113647b06e5f7ab7f72207746613bc6;hb=refs/heads/master#l170

U-Boot additionally sets GPR4[31-28]:

/* enable AXI cache for VDOA/VPU/IPU */
DATA 4 0x020e0010 0xF00000CF

> +	/* Increase IPU read QoS priority */
> +	regmap_update_bits(gpr, IOMUXC_GPR6,
> +			IMX6Q_GPR6_IPU1_ID00_RD_QOS_MASK |
> +			IMX6Q_GPR6_IPU1_ID01_RD_QOS_MASK,
> +			(0xf << 16) | (0x7 << 20));
> +	regmap_update_bits(gpr, IOMUXC_GPR7,
> +			IMX6Q_GPR7_IPU2_ID00_RD_QOS_MASK |
> +			IMX6Q_GPR7_IPU2_ID01_RD_QOS_MASK,
> +			(0xf << 16) | (0x7 << 20));

and here U-Boot additionally touches GPR6/7[6-0]:

/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */
DATA 4 0x020e0018 0x007F007F
DATA 4 0x020e001c 0x007F007F

As mentioned above, I have no idea if/why this is necessary ;)

Best regards

Dirk
diff mbox

Patch

diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 5536fd8..7bef242 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -29,6 +29,7 @@ 
 #include <linux/regmap.h>
 #include <linux/micrel_phy.h>
 #include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -161,6 +162,36 @@  static void __init imx6q_usb_init(void)
 	imx_anatop_usb_chrg_detect_disable();
 }
 
+static void __init imx6q_gpr_init(void)
+{
+	struct regmap *gpr;
+
+	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+	if (IS_ERR(gpr)) {
+		pr_warn("failed to find fsl,imx6q-iomuxc-gpr regmap\n");
+		return;
+	}
+
+	/* Enable the cacheable attribute of VPU and IPU AXI transactions */
+	regmap_update_bits(gpr, IOMUXC_GPR4, 0,
+			IMX6Q_GPR4_VPU_WR_CACHE_SEL |
+			IMX6Q_GPR4_VPU_RD_CACHE_SEL |
+			IMX6Q_GPR4_VPU_P_WR_CACHE_VAL |
+			IMX6Q_GPR4_VPU_P_RD_CACHE_VAL_MASK |
+			IMX6Q_GPR4_IPU_WR_CACHE_CTL |
+			IMX6Q_GPR4_IPU_RD_CACHE_CTL);
+
+	/* Increase IPU read QoS priority */
+	regmap_update_bits(gpr, IOMUXC_GPR6,
+			IMX6Q_GPR6_IPU1_ID00_RD_QOS_MASK |
+			IMX6Q_GPR6_IPU1_ID01_RD_QOS_MASK,
+			(0xf << 16) | (0x7 << 20));
+	regmap_update_bits(gpr, IOMUXC_GPR7,
+			IMX6Q_GPR7_IPU2_ID00_RD_QOS_MASK |
+			IMX6Q_GPR7_IPU2_ID01_RD_QOS_MASK,
+			(0xf << 16) | (0x7 << 20));
+}
+
 static void __init imx6q_init_machine(void)
 {
 	if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
@@ -172,6 +203,7 @@  static void __init imx6q_init_machine(void)
 	imx6q_pm_init();
 	imx6q_usb_init();
 	imx6q_1588_init();
+	imx6q_gpr_init();
 }
 
 #define OCOTP_CFG3			0x440