@@ -24,6 +24,10 @@
soc {
apb@d4000000 {
+ timer0: timer@d4014000 {
+ clock-frequency = <6500000>;
+ status = "okay";
+ };
uart3: uart@d4018000 {
status = "okay";
};
@@ -25,6 +25,7 @@
soc {
apb@d4000000 {
timer0: timer@d4014000 {
+ clock-frequency = <3250000>;
status = "okay";
};
uart1: uart@d4017000 {
@@ -33,6 +33,7 @@
clock-output-names = "refclk1001mhz";
};
timer0: timer@d4014000 {
+ clock-frequency = <3250000>;
status = "okay";
};
uart1: uart@d4017000 {
@@ -1,6 +1,6 @@
#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
-extern void timer_init(int irq);
+extern void timer_init(int irq, int mmp2_mode);
extern void __init mmp_map_io(void);
extern void mmp_restart(char, const char *);
@@ -10,6 +10,7 @@
*/
#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
#include <linux/irqchip.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
@@ -49,7 +50,6 @@ static void __init pxa168_dt_init(void)
static void __init pxa910_dt_init(void)
{
- of_clk_init(NULL);
of_platform_populate(NULL, of_default_bus_match_table,
pxa910_auxdata_lookup, NULL);
}
@@ -60,10 +60,16 @@ static const char *mmp_dt_board_compat[] __initdata = {
NULL,
};
+static void __init mmp_init_timer(void)
+{
+ of_clk_init(NULL);
+ mmp_dt_init_timer();
+}
+
DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)")
.map_io = mmp_map_io,
.init_irq = irqchip_init,
- .init_time = mmp_dt_init_timer,
+ .init_time = mmp_init_timer,
.init_machine = pxa168_dt_init,
.dt_compat = mmp_dt_board_compat,
MACHINE_END
@@ -71,7 +77,7 @@ MACHINE_END
DT_MACHINE_START(PXA910_DT, "Marvell PXA910 (Device Tree Support)")
.map_io = mmp_map_io,
.init_irq = irqchip_init,
- .init_time = mmp_dt_init_timer,
+ .init_time = mmp_init_timer,
.init_machine = pxa910_dt_init,
.dt_compat = mmp_dt_board_compat,
MACHINE_END
@@ -9,6 +9,8 @@
* publishhed by the Free Software Foundation.
*/
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
#include <linux/io.h>
#include <linux/irqchip.h>
#include <linux/of_platform.h>
@@ -17,8 +19,6 @@
#include "common.h"
-extern void __init mmp_dt_init_timer(void);
-
static const struct of_dev_auxdata mmp2_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4030000, "pxa2xx-uart.0", NULL),
OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.1", NULL),
@@ -37,6 +37,12 @@ static void __init mmp2_dt_init(void)
mmp2_auxdata_lookup, NULL);
}
+static void __init mmp2_init_timer(void)
+{
+ of_clk_init(NULL);
+ mmp_dt_init_timer();
+}
+
static const char *mmp2_dt_board_compat[] __initdata = {
"mrvl,mmp2-brownstone",
NULL,
@@ -45,7 +51,7 @@ static const char *mmp2_dt_board_compat[] __initdata = {
DT_MACHINE_START(MMP2_DT, "Marvell MMP2 (Device Tree Support)")
.map_io = mmp_map_io,
.init_irq = irqchip_init,
- .init_time = mmp_dt_init_timer,
+ .init_time = mmp2_init_timer,
.init_machine = mmp2_dt_init,
.dt_compat = mmp2_dt_board_compat,
MACHINE_END
@@ -131,7 +131,7 @@ void __init mmp2_timer_init(void)
clk_rst = APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1);
__raw_writel(clk_rst, APBC_TIMERS);
- timer_init(IRQ_MMP2_TIMER1);
+ timer_init(IRQ_MMP2_TIMER1, 1);
}
/* on-chip devices */
@@ -78,7 +78,7 @@ void __init pxa168_timer_init(void)
/* 3.25MHz, bus/functional clock enabled, release reset */
__raw_writel(TIMER_CLK_RST, APBC_TIMERS);
- timer_init(IRQ_PXA168_TIMER1);
+ timer_init(IRQ_PXA168_TIMER1, 0);
}
void pxa168_clear_keypad_wakeup(void)
@@ -112,7 +112,7 @@ void __init pxa910_timer_init(void)
__raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
__raw_writel(TIMER_CLK_RST, APBC_TIMERS);
- timer_init(IRQ_PXA910_AP1_TIMER1);
+ timer_init(IRQ_PXA910_AP1_TIMER1, 0);
}
/* on-chip devices */
@@ -21,6 +21,7 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
+#include <linux/clk-provider.h>
#include <linux/clockchips.h>
#include <linux/io.h>
@@ -30,8 +31,6 @@
#include <linux/of_irq.h>
#include <asm/sched_clock.h>
-#include <mach/irqs.h>
-#include <mach/cputype.h>
#include <asm/mach/time.h>
#define TMR_CCR (0x0000)
@@ -182,16 +181,19 @@ static struct clocksource cksrc = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-static void __init timer_config(void)
+static void __init timer_init_clk(int mmp2_mode)
{
uint32_t ccr = __raw_readl(mmp_timer_base + TMR_CCR);
__raw_writel(0x0, mmp_timer_base + TMR_CER); /* disable */
- ccr &= (cpu_is_mmp2()) ? (TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) :
+ ccr &= mmp2_mode ? (TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) :
(TMR_CCR_CS_0(3) | TMR_CCR_CS_1(3));
__raw_writel(ccr, mmp_timer_base + TMR_CCR);
+}
+static void __init timer_config(void)
+{
/* set timer 0 to periodic mode, and timer 1 to free-running mode */
__raw_writel(0x2, mmp_timer_base + TMR_CMR);
@@ -214,11 +216,12 @@ static struct irqaction timer_irq = {
.dev_id = &ckevt,
};
-void __init timer_init(int irq)
+void __init timer_init(int irq, int mmp2_mode)
{
mmp_timer_base = ioremap(TIMERS_PHY_BASE, PAGE_SIZE);
BUG_ON(!mmp_timer_base);
+ timer_init_clk(mmp2_mode);
timer_config();
setup_sched_clock(mmp_read_sched_clock, 32, CLOCK_TICK_RATE);
@@ -241,27 +244,48 @@ static struct of_device_id mmp_timer_dt_ids[] = {
void __init mmp_dt_init_timer(void)
{
struct device_node *np;
+ struct clk *clk;
int irq, ret;
+ u32 rate = 0;
np = of_find_matching_node(NULL, mmp_timer_dt_ids);
- if (!np) {
- ret = -ENODEV;
- goto out;
+ if (!np)
+ return;
+ if (!of_device_is_available(np))
+ return;
+ if (of_property_read_u32(np, "clock-frequency", &rate)) {
+ pr_err("failed to find clock-frequency property\n");
+ return;
}
-
irq = irq_of_parse_and_map(np, 0);
- if (!irq) {
- ret = -EINVAL;
- goto out;
+ if (!irq)
+ return;
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ pr_err("failed to get timer clock\n");
+ return;
}
mmp_timer_base = of_iomap(np, 0);
- if (!mmp_timer_base) {
- ret = -ENOMEM;
+ if (!mmp_timer_base)
goto out;
- }
- timer_init(irq);
+
+ __raw_writel(0x0, mmp_timer_base + TMR_CER); /* disable */
+ if (rate)
+ clk_set_rate(clk, rate);
+ clk_prepare_enable(clk);
+ timer_config();
+
+ setup_sched_clock(mmp_read_sched_clock, 32, rate);
+
+ ckevt.cpumask = cpumask_of(0);
+
+ setup_irq(irq, &timer_irq);
+
+ clocksource_register_hz(&cksrc, rate);
+ clockevents_config_and_register(&ckevt, rate,
+ MIN_DELTA, MAX_DELTA);
return;
out:
- pr_err("Failed to get timer from device tree with error:%d\n", ret);
+ clk_put(clk);
}
#endif
Avoid to use cpu_is_xxx() in timer-mmp driver, since it blocks the multiplatform build. Now add mmp2_mode variable for legacy mode. In DT mode, set the right clock rate in DTS file. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> --- arch/arm/boot/dts/mmp2-brownstone.dts | 4 +++ arch/arm/boot/dts/pxa168-aspenite.dts | 1 + arch/arm/boot/dts/pxa910-dkb.dts | 1 + arch/arm/mach-mmp/common.h | 2 +- arch/arm/mach-mmp/mmp-dt.c | 12 ++++++-- arch/arm/mach-mmp/mmp2-dt.c | 12 ++++++-- arch/arm/mach-mmp/mmp2.c | 2 +- arch/arm/mach-mmp/pxa168.c | 2 +- arch/arm/mach-mmp/pxa910.c | 2 +- drivers/clocksource/timer-mmp.c | 58 +++++++++++++++++++++++++---------- 10 files changed, 69 insertions(+), 27 deletions(-)