@@ -26,7 +26,8 @@ CONFIG_ARCH_OMAP=y
CONFIG_ARCH_OMAP1=y
CONFIG_OMAP_RESET_CLOCKS=y
# CONFIG_OMAP_MUX is not set
-CONFIG_OMAP_MBOX_FWK=y
+CONFIG_MAILBOX=y
+CONFIG_OMAP1_MBOX=y
CONFIG_OMAP_32K_TIMER=y
CONFIG_OMAP_DM_TIMER=y
CONFIG_ARCH_OMAP730=y
@@ -19,10 +19,6 @@ obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
# Power Management
obj-$(CONFIG_PM) += pm.o sleep.o
-# DSP
-obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
-mailbox_mach-objs := mailbox.o
-
i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
obj-y += $(i2c-omap-m) $(i2c-omap-y)
@@ -203,9 +203,6 @@ obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o
obj-$(CONFIG_OMAP3_EMU) += emu.o
obj-$(CONFIG_HW_PERF_EVENTS) += pmu.o
-obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
-mailbox_mach-objs := mailbox.o
-
iommu-$(CONFIG_OMAP_IOMMU) := omap-iommu.o
obj-y += $(iommu-m) $(iommu-y)
@@ -328,7 +328,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data
return 0;
}
-#if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
+#if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE)
static inline void __init omap_init_mbox(void)
{
struct omap_hwmod *oh;
@@ -352,7 +352,7 @@ static inline void __init omap_init_mbox(void)
}
#else
static inline void omap_init_mbox(void) { }
-#endif /* CONFIG_OMAP_MBOX_FWK */
+#endif /* CONFIG_OMAP2PLUS_MBOX */
static inline void omap_init_sti(void) {}
@@ -86,22 +86,6 @@ config OMAP_MUX_WARNINGS
to change the pin multiplexing setup. When there are no warnings
printed, it's safe to deselect OMAP_MUX for your product.
-config OMAP_MBOX_FWK
- tristate "Mailbox framework support"
- depends on ARCH_OMAP && !ARCH_MULTIPLATFORM
- help
- Say Y here if you want to use OMAP Mailbox framework support for
- DSP, IVA1.0 and IVA2 in OMAP1/2/3.
-
-config OMAP_MBOX_KFIFO_SIZE
- int "Mailbox kfifo default buffer size (bytes)"
- depends on OMAP_MBOX_FWK
- default 256
- help
- Specify the default size of mailbox's kfifo buffers (bytes).
- This can also be changed at runtime (via the mbox_kfifo_size
- module parameter).
-
config OMAP_IOMMU_IVA2
bool
@@ -17,6 +17,3 @@ obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
obj-y += $(i2c-omap-m) $(i2c-omap-y)
-# OMAP mailbox framework
-obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox.o
-
@@ -16,4 +16,38 @@ config PL320_MBOX
Management Engine, primarily for cpufreq. Say Y here if you want
to use the PL320 IPCM support.
+config OMAP_MBOX
+ tristate
+ help
+ This option is selected by any OMAP architecture specific mailbox
+ driver such as CONFIG_OMAP1_MBOX or CONFIG_OMAP2PLUS_MBOX. This
+ enables the common OMAP mailbox framework code.
+
+config OMAP1_MBOX
+ tristate "OMAP1 Mailbox framework support"
+ depends on ARCH_OMAP1
+ select OMAP_MBOX
+ help
+ Mailbox implementation for OMAP chips with hardware for
+ interprocessor communication involving DSP in OMAP1. Say Y here
+ if you want to use OMAP1 Mailbox framework support.
+
+config OMAP2PLUS_MBOX
+ tristate "OMAP2+ Mailbox framework support"
+ depends on ARCH_OMAP2PLUS
+ select OMAP_MBOX
+ help
+ Mailbox implementation for OMAP family chips with hardware for
+ interprocessor communication involving DSP, IVA1.0 and IVA2 in
+ OMAP2/3; or IPU, IVA HD and DSP in OMAP4/5. Say Y here if you
+ want to use OMAP2+ Mailbox framework support.
+
+config OMAP_MBOX_KFIFO_SIZE
+ int "Mailbox kfifo default buffer size (bytes)"
+ depends on OMAP2PLUS_MBOX || OMAP1_MBOX
+ default 256
+ help
+ Specify the default size of mailbox's kfifo buffers (bytes).
+ This can also be changed at runtime (via the mbox_kfifo_size
+ module parameter).
endif
@@ -1 +1,7 @@
obj-$(CONFIG_PL320_MBOX) += pl320-ipc.o
+
+obj-$(CONFIG_OMAP_MBOX) += omap-mailbox.o
+obj-$(CONFIG_OMAP1_MBOX) += mailbox_omap1.o
+mailbox_omap1-objs := mailbox-omap1.o
+obj-$(CONFIG_OMAP2PLUS_MBOX) += mailbox_omap2.o
+mailbox_omap2-objs := mailbox-omap2.o
similarity index 99%
rename from arch/arm/mach-omap1/mailbox.c
rename to drivers/mailbox/mailbox-omap1.c
@@ -13,7 +13,8 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/io.h>
-#include <plat/mailbox.h>
+
+#include "omap-mbox.h"
#define MAILBOX_ARM2DSP1 0x00
#define MAILBOX_ARM2DSP1b 0x04
similarity index 98%
rename from arch/arm/mach-omap2/mailbox.c
rename to drivers/mailbox/mailbox-omap2.c
@@ -19,7 +19,7 @@
#include <linux/pm_runtime.h>
#include <linux/platform_data/mailbox-omap.h>
-#include <plat/mailbox.h>
+#include "omap-mbox.h"
#define MAILBOX_REVISION 0x000
#define MAILBOX_MESSAGE(m) (0x040 + 4 * (m))
@@ -327,9 +327,9 @@ static int omap2_mbox_remove(struct platform_device *pdev)
}
static struct platform_driver omap2_mbox_driver = {
- .probe = omap2_mbox_probe,
- .remove = omap2_mbox_remove,
- .driver = {
+ .probe = omap2_mbox_probe,
+ .remove = omap2_mbox_remove,
+ .driver = {
.name = "omap-mailbox",
},
};
similarity index 92%
rename from arch/arm/plat-omap/mailbox.c
rename to drivers/mailbox/omap-mailbox.c
@@ -31,7 +31,7 @@
#include <linux/notifier.h>
#include <linux/module.h>
-#include <plat/mailbox.h>
+#include "omap-mbox.h"
static struct omap_mbox **mboxes;
@@ -116,6 +116,40 @@ out:
}
EXPORT_SYMBOL(omap_mbox_msg_send);
+void omap_mbox_save_ctx(struct omap_mbox *mbox)
+{
+ if (!mbox->ops->save_ctx) {
+ dev_err(mbox->dev, "%s:\tno save\n", __func__);
+ return;
+ }
+
+ mbox->ops->save_ctx(mbox);
+}
+EXPORT_SYMBOL(omap_mbox_save_ctx);
+
+void omap_mbox_restore_ctx(struct omap_mbox *mbox)
+{
+ if (!mbox->ops->restore_ctx) {
+ dev_err(mbox->dev, "%s:\tno restore\n", __func__);
+ return;
+ }
+
+ mbox->ops->restore_ctx(mbox);
+}
+EXPORT_SYMBOL(omap_mbox_restore_ctx);
+
+void omap_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
+{
+ mbox->ops->enable_irq(mbox, irq);
+}
+EXPORT_SYMBOL(omap_mbox_enable_irq);
+
+void omap_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
+{
+ mbox->ops->disable_irq(mbox, irq);
+}
+EXPORT_SYMBOL(omap_mbox_disable_irq);
+
static void mbox_tx_tasklet(unsigned long tx_data)
{
struct omap_mbox *mbox = (struct omap_mbox *)tx_data;
similarity index 55%
rename from arch/arm/plat-omap/include/plat/mailbox.h
rename to drivers/mailbox/omap-mbox.h
@@ -1,20 +1,20 @@
-/* mailbox.h */
+/*
+ * omap-mbox.h: OMAP mailbox internal definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
-#ifndef MAILBOX_H
-#define MAILBOX_H
+#ifndef OMAP_MBOX_H
+#define OMAP_MBOX_H
-#include <linux/spinlock.h>
-#include <linux/workqueue.h>
-#include <linux/interrupt.h>
#include <linux/device.h>
+#include <linux/interrupt.h>
#include <linux/kfifo.h>
-
-typedef u32 mbox_msg_t;
-struct omap_mbox;
-
-typedef int __bitwise omap_mbox_irq_t;
-#define IRQ_TX ((__force omap_mbox_irq_t) 1)
-#define IRQ_RX ((__force omap_mbox_irq_t) 2)
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/omap-mailbox.h>
typedef int __bitwise omap_mbox_type_t;
#define OMAP_MBOX_TYPE1 ((__force omap_mbox_type_t) 1)
@@ -58,48 +58,10 @@ struct omap_mbox {
struct device *dev;
void *priv;
int use_count;
- struct blocking_notifier_head notifier;
+ struct blocking_notifier_head notifier;
};
-int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg);
-void omap_mbox_init_seq(struct omap_mbox *);
-
-struct omap_mbox *omap_mbox_get(const char *, struct notifier_block *nb);
-void omap_mbox_put(struct omap_mbox *mbox, struct notifier_block *nb);
-
int omap_mbox_register(struct device *parent, struct omap_mbox **);
int omap_mbox_unregister(void);
-static inline void omap_mbox_save_ctx(struct omap_mbox *mbox)
-{
- if (!mbox->ops->save_ctx) {
- dev_err(mbox->dev, "%s:\tno save\n", __func__);
- return;
- }
-
- mbox->ops->save_ctx(mbox);
-}
-
-static inline void omap_mbox_restore_ctx(struct omap_mbox *mbox)
-{
- if (!mbox->ops->restore_ctx) {
- dev_err(mbox->dev, "%s:\tno restore\n", __func__);
- return;
- }
-
- mbox->ops->restore_ctx(mbox);
-}
-
-static inline void omap_mbox_enable_irq(struct omap_mbox *mbox,
- omap_mbox_irq_t irq)
-{
- mbox->ops->enable_irq(mbox, irq);
-}
-
-static inline void omap_mbox_disable_irq(struct omap_mbox *mbox,
- omap_mbox_irq_t irq)
-{
- mbox->ops->disable_irq(mbox, irq);
-}
-
-#endif /* MAILBOX_H */
+#endif /* OMAP_MBOX_H */
@@ -14,8 +14,9 @@ config OMAP_REMOTEPROC
depends on HAS_DMA
depends on ARCH_OMAP4 || SOC_OMAP5
depends on OMAP_IOMMU
- depends on OMAP_MBOX_FWK
select REMOTEPROC
+ select MAILBOX
+ select OMAP2PLUS_MBOX
select RPMSG
help
Say y here to support OMAP's remote processors (dual M3
@@ -27,8 +27,8 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/remoteproc.h>
+#include <linux/omap-mailbox.h>
-#include <plat/mailbox.h>
#include <linux/platform_data/remoteproc-omap.h>
#include "omap_remoteproc.h"
@@ -5,7 +5,8 @@
menuconfig TIDSPBRIDGE
tristate "DSP Bridge driver"
depends on ARCH_OMAP3 && !ARCH_MULTIPLATFORM
- select OMAP_MBOX_FWK
+ select MAILBOX
+ select OMAP2PLUS_MBOX
help
DSP/BIOS Bridge is designed for platforms that contain a GPP and
one or more attached DSPs. The GPP is considered the master or
@@ -41,7 +41,7 @@
#include <linux/ioport.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
-#include <plat/mailbox.h>
+#include <linux/omap-mailbox.h>
#include <linux/pagemap.h>
#include <asm/cacheflush.h>
#include <linux/dma-mapping.h>
new file mode 100644
@@ -0,0 +1,29 @@
+/*
+ * omap-mailbox: interprocessor communication module for OMAP
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef OMAP_MAILBOX_H
+#define OMAP_MAILBOX_H
+
+typedef u32 mbox_msg_t;
+struct omap_mbox;
+
+typedef int __bitwise omap_mbox_irq_t;
+#define IRQ_TX ((__force omap_mbox_irq_t) 1)
+#define IRQ_RX ((__force omap_mbox_irq_t) 2)
+
+int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg);
+
+struct omap_mbox *omap_mbox_get(const char *, struct notifier_block *nb);
+void omap_mbox_put(struct omap_mbox *mbox, struct notifier_block *nb);
+
+void omap_mbox_save_ctx(struct omap_mbox *mbox);
+void omap_mbox_restore_ctx(struct omap_mbox *mbox);
+void omap_mbox_enable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+void omap_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+
+#endif /* OMAP_MAILBOX_H */
The mailbox hardware (in OMAP) uses a queued mailbox interrupt mechanism that provides a communication channel between processors through a set of registers and their associated interrupt signals by sending and receiving messages. The OMAP mailbox framework/driver code is moved to be under drivers/mailbox, in preparation for adapting to a common mailbox driver framework. This allows the build for OMAP mailbox to be enabled (it was disabled during the multi-platform support). As part of the migration from plat and mach code: - Kconfig symbols have been renamed to build OMAP1 or OMAP2+ drivers. - mailbox.h under plat-omap/plat/include has been split into a public and private header files. The public header has only the API related functions and types. - The module name mailbox.ko from plat-omap is changed to omap-mailbox.ko - The module name mailbox_mach.ko from mach-omapX is changed as mailbox_omap1.ko for OMAP1 mailbox_omap2.ko for OMAP2+ Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Omar Ramirez Luna <omar.ramirez@copitl.com> Signed-off-by: Suman Anna <s-anna@ti.com> ---- This is similar to Omar's earlier patches for moving the code, but is revised to prepare for adapting to a mailbox framework different from the OMAP-derived mailbox framework. --- arch/arm/configs/omap1_defconfig | 3 +- arch/arm/mach-omap1/Makefile | 4 -- arch/arm/mach-omap2/Makefile | 3 - arch/arm/mach-omap2/devices.c | 4 +- arch/arm/plat-omap/Kconfig | 16 ----- arch/arm/plat-omap/Makefile | 3 - drivers/mailbox/Kconfig | 34 +++++++++++ drivers/mailbox/Makefile | 6 ++ .../mailbox.c => drivers/mailbox/mailbox-omap1.c | 3 +- .../mailbox.c => drivers/mailbox/mailbox-omap2.c | 8 +-- .../mailbox.c => drivers/mailbox/omap-mailbox.c | 36 +++++++++++- .../plat/mailbox.h => drivers/mailbox/omap-mbox.h | 68 +++++----------------- drivers/remoteproc/Kconfig | 3 +- drivers/remoteproc/omap_remoteproc.c | 2 +- drivers/staging/tidspbridge/Kconfig | 3 +- .../tidspbridge/include/dspbridge/host_os.h | 2 +- include/linux/omap-mailbox.h | 29 +++++++++ 17 files changed, 135 insertions(+), 92 deletions(-) rename arch/arm/mach-omap1/mailbox.c => drivers/mailbox/mailbox-omap1.c (99%) rename arch/arm/mach-omap2/mailbox.c => drivers/mailbox/mailbox-omap2.c (98%) rename arch/arm/plat-omap/mailbox.c => drivers/mailbox/omap-mailbox.c (92%) rename arch/arm/plat-omap/include/plat/mailbox.h => drivers/mailbox/omap-mbox.h (55%) create mode 100644 include/linux/omap-mailbox.h