@@ -21,12 +21,6 @@
/* DMA channels for omap1 */
#define OMAP_DMA_NO_DEVICE 0
-#define OMAP_DMA_MCBSP1_TX 8
-#define OMAP_DMA_MCBSP1_RX 9
-#define OMAP_DMA_MCBSP3_TX 10
-#define OMAP_DMA_MCBSP3_RX 11
-#define OMAP_DMA_MCBSP2_TX 16
-#define OMAP_DMA_MCBSP2_RX 17
#define OMAP_DMA_UART3_TX 18
#define OMAP_DMA_UART3_RX 19
#define OMAP_DMA_CAMERA_IF_RX 20
@@ -27,7 +27,6 @@
#include <mach/irqs.h>
#include "iomap.h"
-#include "dma.h"
#define DPS_RSTCT2_PER_EN (1 << 0)
#define DSP_RSTCT2_WD_PER_EN (1 << 1)
@@ -114,12 +113,12 @@ struct resource omap7xx_mcbsp_res[][6] = {
},
{
.name = "rx",
- .start = OMAP_DMA_MCBSP1_RX,
+ .start = 9,
.flags = IORESOURCE_DMA,
},
{
.name = "tx",
- .start = OMAP_DMA_MCBSP1_TX,
+ .start = 8,
.flags = IORESOURCE_DMA,
},
},
@@ -141,12 +140,12 @@ struct resource omap7xx_mcbsp_res[][6] = {
},
{
.name = "rx",
- .start = OMAP_DMA_MCBSP3_RX,
+ .start = 11,
.flags = IORESOURCE_DMA,
},
{
.name = "tx",
- .start = OMAP_DMA_MCBSP3_TX,
+ .start = 10,
.flags = IORESOURCE_DMA,
},
},
@@ -191,12 +190,12 @@ struct resource omap15xx_mcbsp_res[][6] = {
},
{
.name = "rx",
- .start = OMAP_DMA_MCBSP1_RX,
+ .start = 9,
.flags = IORESOURCE_DMA,
},
{
.name = "tx",
- .start = OMAP_DMA_MCBSP1_TX,
+ .start = 8,
.flags = IORESOURCE_DMA,
},
},
@@ -218,12 +217,12 @@ struct resource omap15xx_mcbsp_res[][6] = {
},
{
.name = "rx",
- .start = OMAP_DMA_MCBSP2_RX,
+ .start = 17,
.flags = IORESOURCE_DMA,
},
{
.name = "tx",
- .start = OMAP_DMA_MCBSP2_TX,
+ .start = 16,
.flags = IORESOURCE_DMA,
},
},
@@ -245,12 +244,12 @@ struct resource omap15xx_mcbsp_res[][6] = {
},
{
.name = "rx",
- .start = OMAP_DMA_MCBSP3_RX,
+ .start = 11,
.flags = IORESOURCE_DMA,
},
{
.name = "tx",
- .start = OMAP_DMA_MCBSP3_TX,
+ .start = 10,
.flags = IORESOURCE_DMA,
},
},
@@ -298,12 +297,12 @@ struct resource omap16xx_mcbsp_res[][6] = {
},
{
.name = "rx",
- .start = OMAP_DMA_MCBSP1_RX,
+ .start = 9,
.flags = IORESOURCE_DMA,
},
{
.name = "tx",
- .start = OMAP_DMA_MCBSP1_TX,
+ .start = 8,
.flags = IORESOURCE_DMA,
},
},
@@ -325,12 +324,12 @@ struct resource omap16xx_mcbsp_res[][6] = {
},
{
.name = "rx",
- .start = OMAP_DMA_MCBSP2_RX,
+ .start = 17,
.flags = IORESOURCE_DMA,
},
{
.name = "tx",
- .start = OMAP_DMA_MCBSP2_TX,
+ .start = 16,
.flags = IORESOURCE_DMA,
},
},
@@ -352,12 +351,12 @@ struct resource omap16xx_mcbsp_res[][6] = {
},
{
.name = "rx",
- .start = OMAP_DMA_MCBSP3_RX,
+ .start = 11,
.flags = IORESOURCE_DMA,
},
{
.name = "tx",
- .start = OMAP_DMA_MCBSP3_TX,
+ .start = 10,
.flags = IORESOURCE_DMA,
},
},
arch/arm/mach-omap1/mcbsp.c is only place where OMAP1 McBSP DMA channel definitions are set. We may well use numerical values there and get rid of their definitions in arch/arm/mach-omap1/dma.h. Remove dma.h include from arch/arm/mach-omap1/mcbsp.c and use following script for replacing definitions with DMA channel number: egrep '#define OMAP_DMA_MCBSP' arch/arm/mach-omap1/dma.h | cut -f 1,3 \ | while read i; do \ DEF=`echo $i |cut -d ' ' -f 2`; \ CH=`echo $i |cut -d ' ' -f 3`; \ echo "removing" $DEF; \ sed -i "s/${DEF}/${CH}/" arch/arm/mach-omap1/mcbsp.c; \ sed -i "/${DEF}/d" arch/arm/mach-omap1/dma.h; \ done Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> --- arch/arm/mach-omap1/dma.h | 6 ------ arch/arm/mach-omap1/mcbsp.c | 33 ++++++++++++++++----------------- 2 files changed, 16 insertions(+), 23 deletions(-)