@@ -25,32 +25,12 @@
__CPUINIT
/*
- * Reset vector for secondary CPUs.
+ * Boot code for secondary CPUs.
*
* First we turn on L1 cache coherency for our CPU. Then we jump to
* shmobile_invalidate_start that invalidates the cache and hands over control
* to the common ARM startup code.
- * This function will be mapped to address 0 by the SBAR register.
- * A normal branch is out of range here so we need a long jump. We jump to
- * the physical address as the MMU is still turned off.
*/
- .align 12
-ENTRY(shmobile_secondary_vector_scu)
- mrc p15, 0, r0, c0, c0, 5 @ read MIPDR
- and r0, r0, #3 @ mask out cpu ID
- lsl r0, r0, #3 @ we will shift by cpu_id * 8 bits
- ldr r1, 2f
- ldr r1, [r1] @ SCU base address
- ldr r2, [r1, #8] @ SCU Power Status Register
- mov r3, #3
- bic r2, r2, r3, lsl r0 @ Clear bits of our CPU (Run Mode)
- str r2, [r1, #8] @ write back
-
- ldr pc, 1f
-1: .long shmobile_invalidate_start - PAGE_OFFSET + PLAT_PHYS_OFFSET
-2: .long shmobile_scu_base - PAGE_OFFSET + PLAT_PHYS_OFFSET
-ENDPROC(shmobile_secondary_vector_scu)
-
ENTRY(shmobile_boot_scu)
@ r0 = SCU base address
mrc p15, 0, r1, c0, c0, 5 @ read MIPDR
@@ -10,7 +10,6 @@ extern void shmobile_setup_console(void);
extern void shmobile_boot_vector(void);
extern unsigned long shmobile_boot_fn;
extern unsigned long shmobile_boot_arg;
-extern void shmobile_secondary_vector_scu(void);
extern void shmobile_boot_scu(void);
struct clk;
extern int shmobile_clk_init(void);