| Message ID | 1371570024-11613-3-git-send-email-gregory.clement@free-electrons.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, Jun 18, 2013 at 05:40:24PM +0200, Gregory CLEMENT wrote: > From: Zbigniew Bodek <zbb@semihalf.com> > > This commit adds checking whether clock-frequency property acquisition > has succeeded. Do not waste time to find baud factors if there is no > information about the desired bus frequency in dts. > > [gregory.clement@free-electrons.com: Reword the commit log] > > Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> > Signed-off-by: Zbigniew Bodek <zbb@semihalf.com> What about setting it to 100kHz when not defined (and marking the property optional in the docs)? That's convenient and common I'd say. > --- > drivers/i2c/busses/i2c-mv64xxx.c | 6 +++++- > 1 file changed, 5 insertions(+), 1 deletion(-) > > diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c > index 74f8fcb..de384a1 100644 > --- a/drivers/i2c/busses/i2c-mv64xxx.c > +++ b/drivers/i2c/busses/i2c-mv64xxx.c > @@ -591,7 +591,11 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data, > goto out; > } > tclk = clk_get_rate(drv_data->clk); > - of_property_read_u32(np, "clock-frequency", &bus_freq); > + > + rc = of_property_read_u32(np, "clock-frequency", &bus_freq); > + if (rc) > + goto out; > + > if (!mv64xxx_find_baud_factors(bus_freq, tclk, > &drv_data->freq_n, &drv_data->freq_m)) { > rc = -EINVAL; > -- > 1.8.1.2 >
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 74f8fcb..de384a1 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -591,7 +591,11 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data, goto out; } tclk = clk_get_rate(drv_data->clk); - of_property_read_u32(np, "clock-frequency", &bus_freq); + + rc = of_property_read_u32(np, "clock-frequency", &bus_freq); + if (rc) + goto out; + if (!mv64xxx_find_baud_factors(bus_freq, tclk, &drv_data->freq_n, &drv_data->freq_m)) { rc = -EINVAL;