diff mbox

[v3,3/5] ARM: davinci: da850: do not specify clock_frequency for UART DT node

Message ID 1371633342-1210-4-git-send-email-prakash.pm@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Manjunathappa, Prakash June 19, 2013, 9:15 a.m. UTC
DT kernel on da850-evm comes up with garbled UART logs. This is because
of mismatch in actual module clock rate and rate specified(clock-frequency)
in DT blob. kernel should not assume or depend on bootloaders clock
configuration, instead let it find the clock rate at runtime.

Issue discussed here before arriving on this implementation:
"ARM: davinci: da850 evm: update clock rate for UART 1/2 DT nodes"
https://patchwork.kernel.org/patch/2162271/

Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
---
 arch/arm/boot/dts/da850.dtsi |    3 ---
 1 files changed, 0 insertions(+), 3 deletions(-)

Comments

Sekhar Nori July 22, 2013, 10:03 a.m. UTC | #1
On Wednesday 19 June 2013 02:45 PM, Manjunathappa, Prakash wrote:
> DT kernel on da850-evm comes up with garbled UART logs. This is because
> of mismatch in actual module clock rate and rate specified(clock-frequency)
> in DT blob. kernel should not assume or depend on bootloaders clock
> configuration, instead let it find the clock rate at runtime.
> 
> Issue discussed here before arriving on this implementation:
> "ARM: davinci: da850 evm: update clock rate for UART 1/2 DT nodes"
> https://patchwork.kernel.org/patch/2162271/
> 
> Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>

Adding to v3.12/soc branch of my tree.

Thanks,
Sekhar
diff mbox

Patch

diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 2c88313..4d43046 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -129,7 +129,6 @@ 
 		serial0: serial@1c42000 {
 			compatible = "ns16550a";
 			reg = <0x42000 0x100>;
-			clock-frequency = <150000000>;
 			reg-shift = <2>;
 			interrupts = <25>;
 			status = "disabled";
@@ -137,7 +136,6 @@ 
 		serial1: serial@1d0c000 {
 			compatible = "ns16550a";
 			reg = <0x10c000 0x100>;
-			clock-frequency = <150000000>;
 			reg-shift = <2>;
 			interrupts = <53>;
 			status = "disabled";
@@ -145,7 +143,6 @@ 
 		serial2: serial@1d0d000 {
 			compatible = "ns16550a";
 			reg = <0x10d000 0x100>;
-			clock-frequency = <150000000>;
 			reg-shift = <2>;
 			interrupts = <61>;
 			status = "disabled";