@@ -35,6 +35,56 @@
#size-cells = <1>;
interrupt-parent = <&mpic>;
+ devbus-bootcs {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ devbus-cs0 {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ devbus-cs1 {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ devbus-cs2 {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
+ devbus-cs3 {
+ compatible = "marvell,mvebu-devbus";
+ reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
+ ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&coreclk 0>;
+ status = "disabled";
+ };
+
internal-regs {
compatible = "simple-bus";
#address-cells = <1>;
@@ -181,50 +231,6 @@
status = "disabled";
};
- devbus-bootcs@10400 {
- compatible = "marvell,mvebu-devbus";
- reg = <0x10400 0x8>;
- #address-cells = <1>;
- #size-cells = <1>;
- clocks = <&coreclk 0>;
- status = "disabled";
- };
-
- devbus-cs0@10408 {
- compatible = "marvell,mvebu-devbus";
- reg = <0x10408 0x8>;
- #address-cells = <1>;
- #size-cells = <1>;
- clocks = <&coreclk 0>;
- status = "disabled";
- };
-
- devbus-cs1@10410 {
- compatible = "marvell,mvebu-devbus";
- reg = <0x10410 0x8>;
- #address-cells = <1>;
- #size-cells = <1>;
- clocks = <&coreclk 0>;
- status = "disabled";
- };
-
- devbus-cs2@10418 {
- compatible = "marvell,mvebu-devbus";
- reg = <0x10418 0x8>;
- #address-cells = <1>;
- #size-cells = <1>;
- clocks = <&coreclk 0>;
- status = "disabled";
- };
-
- devbus-cs3@10420 {
- compatible = "marvell,mvebu-devbus";
- reg = <0x10420 0x8>;
- #address-cells = <1>;
- #size-cells = <1>;
- clocks = <&coreclk 0>;
- status = "disabled";
- };
};
};
};
@@ -40,7 +40,36 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+
+ devbus-bootcs {
+ status = "okay";
+
+ /* Device Bus parameters are required */
+
+ /* Read parameters */
+ devbus,bus-width = <8>;
+ devbus,turn-off-ps = <60000>;
+ devbus,badr-skew-ps = <0>;
+ devbus,acc-first-ps = <124000>;
+ devbus,acc-next-ps = <248000>;
+ devbus,rd-setup-ps = <0>;
+ devbus,rd-hold-ps = <0>;
+
+ /* Write parameters */
+ devbus,sync-enable = <0>;
+ devbus,wr-high-ps = <60000>;
+ devbus,wr-low-ps = <60000>;
+ devbus,ale-wr-ps = <60000>;
+
+ /* NOR 16 MiB */
+ nor@0 {
+ compatible = "cfi-flash";
+ reg = <0 0x1000000>;
+ bank-width = <2>;
+ };
+ };
internal-regs {
serial@12000 {
@@ -116,35 +145,6 @@
};
};
- devbus-bootcs@10400 {
- status = "okay";
- ranges = <0 0xf0000000 0x1000000>; /* @addr 0xf000000, size 0x1000000 */
-
- /* Device Bus parameters are required */
-
- /* Read parameters */
- devbus,bus-width = <8>;
- devbus,turn-off-ps = <60000>;
- devbus,badr-skew-ps = <0>;
- devbus,acc-first-ps = <124000>;
- devbus,acc-next-ps = <248000>;
- devbus,rd-setup-ps = <0>;
- devbus,rd-hold-ps = <0>;
-
- /* Write parameters */
- devbus,sync-enable = <0>;
- devbus,wr-high-ps = <60000>;
- devbus,wr-low-ps = <60000>;
- devbus,ale-wr-ps = <60000>;
-
- /* NOR 16 MiB */
- nor@0 {
- compatible = "cfi-flash";
- reg = <0 0x1000000>;
- bank-width = <2>;
- };
- };
-
pcie-controller {
status = "okay";
@@ -28,7 +28,36 @@
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>;
+
+ devbus-bootcs {
+ status = "okay";
+
+ /* Device Bus parameters are required */
+
+ /* Read parameters */
+ devbus,bus-width = <8>;
+ devbus,turn-off-ps = <60000>;
+ devbus,badr-skew-ps = <0>;
+ devbus,acc-first-ps = <124000>;
+ devbus,acc-next-ps = <248000>;
+ devbus,rd-setup-ps = <0>;
+ devbus,rd-hold-ps = <0>;
+
+ /* Write parameters */
+ devbus,sync-enable = <0>;
+ devbus,wr-high-ps = <60000>;
+ devbus,wr-low-ps = <60000>;
+ devbus,ale-wr-ps = <60000>;
+
+ /* NOR 128 MiB */
+ nor@0 {
+ compatible = "cfi-flash";
+ reg = <0 0x8000000>;
+ bank-width = <2>;
+ };
+ };
internal-regs {
serial@12000 {
@@ -144,35 +173,6 @@
status = "okay";
};
- devbus-bootcs@10400 {
- status = "okay";
- ranges = <0 0xf0000000 0x8000000>; /* @addr 0xf000000, size 0x8000000 */
-
- /* Device Bus parameters are required */
-
- /* Read parameters */
- devbus,bus-width = <8>;
- devbus,turn-off-ps = <60000>;
- devbus,badr-skew-ps = <0>;
- devbus,acc-first-ps = <124000>;
- devbus,acc-next-ps = <248000>;
- devbus,rd-setup-ps = <0>;
- devbus,rd-hold-ps = <0>;
-
- /* Write parameters */
- devbus,sync-enable = <0>;
- devbus,wr-high-ps = <60000>;
- devbus,wr-low-ps = <60000>;
- devbus,ale-wr-ps = <60000>;
-
- /* NOR 128 MiB */
- nor@0 {
- compatible = "cfi-flash";
- reg = <0 0x8000000>;
- bank-width = <2>;
- };
- };
-
pcie-controller {
status = "okay";
/* Internal mini-PCIe connector */
Now that mbus has been added to the device tree, it's possible to move the DeviceBus out of internal registers, placing it directly below the mbus. This is a more accurate representation of the hardware. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> --- arch/arm/boot/dts/armada-370-xp.dtsi | 94 +++++++++++++----------- arch/arm/boot/dts/armada-xp-gp.dts | 60 +++++++-------- arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 60 +++++++-------- 3 files changed, 110 insertions(+), 104 deletions(-)