@@ -1087,6 +1087,20 @@ if !MMU
source "arch/arm/Kconfig-nommu"
endif
+config PJ4B_ERRATA_4742
+ bool "PJ4B Errata 4742: IDLE Wake Up Commands can Cause the CPU Core to Cease Operation"
+ depends on CPU_PJ4B && MACH_ARMADA_370
+ default y
+ help
+ When coming out of either a Wait for Interrupt (WFI) or a Wait for
+ Event (WFE) IDLE states, a specific timing sensitivity exists between
+ the retiring WFI/WFE instructions and the newly issued subsequent
+ instructions. This sensitivity can result in a CPU hang scenario.
+ Workaround:
+ The software must insert either a Data Synchronization Barrier (DSB)
+ or Data Memory Barrier (DMB) command immediately after the WFI/WFE
+ instruction
+
config ARM_ERRATA_326103
bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory"
depends on CPU_V6
@@ -230,6 +230,15 @@
# endif
#endif
+#ifdef CONFIG_CPU_PJ4B
+# ifdef CPU_NAME
+# undef MULTI_CPU
+# define MULTI_CPU
+# else
+# define CPU_NAME cpu_pj4b
+# endif
+#endif
+
#ifndef MULTI_CPU
#define cpu_proc_init __glue(CPU_NAME,_proc_init)
#define cpu_proc_fin __glue(CPU_NAME,_proc_fin)
@@ -333,3 +333,8 @@ ENTRY(\name\()_tlb_fns)
.endif
.size \name\()_tlb_fns, . - \name\()_tlb_fns
.endm
+
+.macro globl_equ x, y
+ .globl \x
+ .equ \x, \y
+.endm
@@ -342,6 +342,29 @@ __v7_setup:
mov pc, lr @ return to head.S:__ret
ENDPROC(__v7_setup)
+#ifdef CONFIG_CPU_PJ4B
+ globl_equ cpu_pj4b_switch_mm, cpu_v7_switch_mm
+ globl_equ cpu_pj4b_set_pte_ext, cpu_v7_set_pte_ext
+ globl_equ cpu_pj4b_proc_init, cpu_v7_proc_init
+ globl_equ cpu_pj4b_proc_fin, cpu_v7_proc_fin
+ globl_equ cpu_pj4b_reset, cpu_v7_reset
+#ifdef CONFIG_PJ4B_ERRATA_4742
+ENTRY(cpu_pj4b_do_idle)
+ dsb @ WFI may enter a low-power mode
+ wfi
+ dsb @barrier
+ mov pc, lr
+ENDPROC(cpu_pj4b_do_idle)
+#else
+ globl_equ cpu_pj4b_do_idle, cpu_v7_do_idle
+#endif
+ globl_equ cpu_pj4b_dcache_clean_area, cpu_v7_dcache_clean_area
+ globl_equ cpu_pj4b_do_suspend, cpu_v7_do_suspend
+ globl_equ cpu_pj4b_do_resume, cpu_v7_do_resume
+ globl_equ cpu_pj4b_suspend_size, cpu_v7_suspend_size
+
+#endif
+
.align 2
__v7_setup_stack:
.space 4 * 11 @ 11 registers
@@ -350,6 +373,9 @@ __v7_setup_stack:
@ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
define_processor_functions v7, dabort=v7_early_abort, pabort=v7_pabort, suspend=1
+#ifdef CONFIG_CPU_PJ4B
+ define_processor_functions pj4b, dabort=v7_early_abort, pabort=v7_pabort, suspend=1
+#endif
.section ".rodata"
@@ -362,7 +388,7 @@ __v7_setup_stack:
/*
* Standard v7 proc info content
*/
-.macro __v7_proc initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0
+.macro __v7_proc initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0, proc_fns = v7_processor_functions
ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \
PMD_SECT_AF | PMD_FLAGS_SMP | \mm_mmuflags)
ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \
@@ -375,7 +401,7 @@ __v7_setup_stack:
.long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_FAST_MULT | \
HWCAP_EDSP | HWCAP_TLS | \hwcaps
.long cpu_v7_name
- .long v7_processor_functions
+ .long \proc_fns
.long v7wbi_tlb_fns
.long v6_user_fns
.long v7_cache_fns
@@ -407,12 +433,14 @@ __v7_ca9mp_proc_info:
/*
* Marvell PJ4B processor.
*/
+#ifdef CONFIG_CPU_PJ4B
.type __v7_pj4b_proc_info, #object
__v7_pj4b_proc_info:
.long 0x560f5800
.long 0xff0fff00
- __v7_proc __v7_pj4b_setup
+ __v7_proc __v7_pj4b_setup, proc_fns = pj4b_processor_functions
.size __v7_pj4b_proc_info, . - __v7_pj4b_proc_info
+#endif
/*
* ARM Ltd. Cortex A7 processor.
This commit fixes the regression on Armada 370 (the kernal hang during boot) introduced by the commit: "ARM: 7691/1: mm: kill unused TLB_CAN_READ_FROM_L1_CACHE and use ALT_SMP instead". When coming out of either a Wait for Interrupt (WFI) or a Wait for Event (WFE) IDLE states, a specific timing sensitivity exists between the retiring WFI/WFE instructions and the newly issued subsequent instructions. This sensitivity can result in a CPU hang scenario. The workaround is to insert either a Data Synchronization Barrier (DSB) or Data Memory Barrier (DMB) command immediately after the WFI/WFE instruction. This commit was based on the work of Lior Amsalem, but heavily modified to apply the errata fix dynamically according to the processor type thanks to the suggestions of Russell King and Nicolas Pitre. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: <stable@vger.kernel.org> --- arch/arm/Kconfig | 14 ++++++++++++++ arch/arm/include/asm/glue-proc.h | 9 +++++++++ arch/arm/mm/proc-macros.S | 5 +++++ arch/arm/mm/proc-v7.S | 34 +++++++++++++++++++++++++++++++--- 4 files changed, 59 insertions(+), 3 deletions(-)