From patchwork Wed Jun 26 08:51:12 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Alexandre Belloni X-Patchwork-Id: 2787741 Return-Path: X-Original-To: patchwork-linux-arm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork1.web.kernel.org (Postfix) with ESMTP id 93D0D9F3A0 for ; Wed, 26 Jun 2013 18:26:39 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 60F7B204F9 for ; Wed, 26 Jun 2013 18:26:38 +0000 (UTC) Received: from casper.infradead.org (casper.infradead.org [85.118.1.10]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 9833C204F7 for ; Wed, 26 Jun 2013 18:26:36 +0000 (UTC) Received: from merlin.infradead.org ([2001:4978:20e::2]) by casper.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1Ursxf-00016R-R7; Wed, 26 Jun 2013 16:52:54 +0000 Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1UrswL-0000J9-Ny; Wed, 26 Jun 2013 16:51:29 +0000 Received: from casper.infradead.org ([2001:770:15f::2]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1UrsNo-00037P-3a for linux-arm-kernel@merlin.infradead.org; Wed, 26 Jun 2013 16:15:48 +0000 Received: from mail.free-electrons.com ([94.23.35.102]) by casper.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1UrlSQ-0002Qg-Q7 for linux-arm-kernel@lists.infradead.org; Wed, 26 Jun 2013 08:52:08 +0000 Received: by mail.free-electrons.com (Postfix, from userid 106) id C540379A; Wed, 26 Jun 2013 10:51:18 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Spam-Level: X-Spam-Status: No, score=-5.5 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_MED, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 Received: from localhost (128-79-216-144.hfc.dyn.abo.bbox.fr [128.79.216.144]) by mail.free-electrons.com (Postfix) with ESMTPSA id 665ED759; Wed, 26 Jun 2013 10:51:18 +0200 (CEST) From: Alexandre Belloni To: Shawn Guo , Jean Delvare Subject: [PATCH 3/4] hwmon: Add a simple driver to read the MXS SoC temperature Date: Wed, 26 Jun 2013 10:51:12 +0200 Message-Id: <1372236673-20725-4-git-send-email-alexandre.belloni@free-electrons.com> X-Mailer: git-send-email 1.8.1.2 In-Reply-To: <1372236673-20725-1-git-send-email-alexandre.belloni@free-electrons.com> References: <1372236673-20725-1-git-send-email-alexandre.belloni@free-electrons.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20130626_095207_023594_9D29F1A6 X-CRM114-Status: GOOD ( 24.07 ) X-Spam-Score: -3.2 (---) Cc: Russell King , brian@crystalfontz.com, linux-doc@vger.kernel.org, devicetree-discuss@lists.ozlabs.org, jimwall@q.com, Rob Herring , linux-kernel@vger.kernel.org, Alexandre Belloni , linux-arm-kernel@lists.infradead.org, Rob Landley , Grant Likely , Maxime Ripard , lm-sensors@lm-sensors.org, Guenter Roeck X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+patchwork-linux-arm=patchwork.kernel.org@lists.infradead.org X-Virus-Scanned: ClamAV using ClamSMTP The low resolution ADC of the mxs is able to read an internal temperature sensor, expose that using hwmon. Signed-off-by: Alexandre Belloni --- .../devicetree/bindings/hwmon/mxs-cputemp.txt | 18 +++ Documentation/hwmon/mxs-cputemp | 29 +++++ drivers/hwmon/Kconfig | 10 ++ drivers/hwmon/Makefile | 1 + drivers/hwmon/mxs-cputemp.c | 132 +++++++++++++++++++++ 5 files changed, 190 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/mxs-cputemp.txt create mode 100644 Documentation/hwmon/mxs-cputemp create mode 100644 drivers/hwmon/mxs-cputemp.c diff --git a/Documentation/devicetree/bindings/hwmon/mxs-cputemp.txt b/Documentation/devicetree/bindings/hwmon/mxs-cputemp.txt new file mode 100644 index 0000000..7d3ae47 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/mxs-cputemp.txt @@ -0,0 +1,18 @@ +mxs cputemp hwmon sensors +------------------------- + +See: Documentation/hwmon/mxs-cputemp + +Required properties: +- compatible: should be "fsl,mxs-internal-temp" +- io-channels: should list the two adc channels needed to calculate the + temperature +- io-channel-names: should map the previously listed adc channels to the "min" + and "max" value + +Example: + temp { + compatible = "fsl,mxs-internal-temp"; + io-channels = <&lradc 8>, <&lradc 9>; + io-channel-names = "min", "max"; + }; diff --git a/Documentation/hwmon/mxs-cputemp b/Documentation/hwmon/mxs-cputemp new file mode 100644 index 0000000..6c6201f --- /dev/null +++ b/Documentation/hwmon/mxs-cputemp @@ -0,0 +1,29 @@ +Kernel driver mxs-cputemp +========================= + +Supported chips: + * Freescale i.mx28 + Datasheet: i.MX28 Applications Processor Reference Manual, Rev. 1, 2010 + http://cache.freescale.com/files/dsp/doc/ref_manual/MCIMX28RM.pdf + +Author: Alexandre Belloni + +Description +----------- +This driver permits reading the internal die temperature sensor embedded inside +Freescale i.mx28 SoCs. This sensor is read through two channels of the on chip +Low-Resolution ADC. After calculation, the three-sigma error of the temperature +sensor should be within ± 1.5% in degrees Kelvin. Additionally, the temperature +sampling has a three-sigma sample-to-sample variation of 2 degrees Kelvin. If +desired, this error can be removed by oversampling and averaging the temperature +result. + +The formula is: + (Channel9 – Channel8) * Gain_correction/4 + +As recommended by the datasheet, Gain_correction is equal to 1.012. + +sysfs entries +------------- +temp1_input Measured and corrected temperature in millidegrees Celsius + diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 0428e8a..2daf794 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -929,6 +929,16 @@ config SENSORS_MCP3021 This driver can also be built as a module. If so, the module will be called mcp3021. +config SENSORS_MXS_CPU + tristate "MXS internal CPU temperature sensor" + depends on MXS_LRADC + help + If you say yes here you get support for the i.mx28 internal + temperature sensor. + + This driver can also be built as a module. If so, the module + will be called mxs-cputemp + config SENSORS_NCT6775 tristate "Nuvoton NCT6775F and compatibles" depends on !PPC diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index d17d3e6..366c92d 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -108,6 +108,7 @@ obj-$(CONFIG_SENSORS_MAX6650) += max6650.o obj-$(CONFIG_SENSORS_MAX6697) += max6697.o obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o obj-$(CONFIG_SENSORS_MCP3021) += mcp3021.o +obj-$(CONFIG_SENSORS_MXS_CPU) += mxs-cputemp.o obj-$(CONFIG_SENSORS_NCT6775) += nct6775.o obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o obj-$(CONFIG_SENSORS_PC87360) += pc87360.o diff --git a/drivers/hwmon/mxs-cputemp.c b/drivers/hwmon/mxs-cputemp.c new file mode 100644 index 0000000..a312fb5 --- /dev/null +++ b/drivers/hwmon/mxs-cputemp.c @@ -0,0 +1,132 @@ +/* + * Driver for the mxs internal temperature sensor + * + * Copyright 2013 Free Electrons + * + * Licensed under the GPLv2 or later. + */ + +#define DRVNAME "mxs-hwmon" + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define GAIN_CORRECTION 1012 + +/* The value we calculate from the ADCs is in Kelvins, don't forget to convert + * it to Celsius */ +#define VALUES_TO_MILLIC(min, max) ((max - min) * GAIN_CORRECTION / 4 - 272150) + +struct mxs_hwmon_data { + struct device *hwmon_dev; + struct iio_channel *chan_min; + struct iio_channel *chan_max; +}; + +static int mxs_hwmon_show_temp(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int err, val_min, val_max; + + struct mxs_hwmon_data *data = dev_get_drvdata(dev); + + err = iio_read_channel_raw(data->chan_min, &val_min); + if (err < 0) + return err; + + err = iio_read_channel_raw(data->chan_max, &val_max); + if (err < 0) + return err; + + return sprintf(buf, "%u\n", VALUES_TO_MILLIC(val_min, val_max)); +} + +static DEVICE_ATTR(temp1_input, S_IRUGO, mxs_hwmon_show_temp, NULL); + +static int mxs_hwmon_probe(struct platform_device *pdev) +{ + int err; + struct mxs_hwmon_data *data; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + platform_set_drvdata(pdev, data); + + err = device_create_file(&pdev->dev, &dev_attr_temp1_input); + if (err) + return err; + + data->chan_min = iio_channel_get(&pdev->dev, "min"); + if (IS_ERR(data->chan_min)) { + err = PTR_ERR(data->chan_min); + goto error_chan_min; + } + + data->chan_max = iio_channel_get(&pdev->dev, "max"); + if (IS_ERR(data->chan_max)) { + err = PTR_ERR(data->chan_max); + goto error_chan_max; + } + + data->hwmon_dev = hwmon_device_register(&pdev->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + goto error_hwmon; + } + + return 0; + +error_hwmon: + iio_channel_release(data->chan_max); +error_chan_max: + iio_channel_release(data->chan_min); +error_chan_min: + device_remove_file(&pdev->dev, &dev_attr_temp1_input); + + return err; +} + +static int mxs_hwmon_remove(struct platform_device *pdev) +{ + struct mxs_hwmon_data *data = platform_get_drvdata(pdev); + + iio_channel_release(data->chan_min); + iio_channel_release(data->chan_max); + hwmon_device_unregister(data->hwmon_dev); + + device_remove_file(&pdev->dev, &dev_attr_temp1_input); + + return 0; +} + +static struct of_device_id mxs_hwmon_of_match[] = { + { .compatible = "fsl,mxs-internal-temp", }, + {} +}; +MODULE_DEVICE_TABLE(of, mxs_hwmon_of_match); + +static struct platform_driver mxs_hwmon_driver = { + .probe = mxs_hwmon_probe, + .remove = mxs_hwmon_remove, + .driver = { + .name = DRVNAME, + .owner = THIS_MODULE, + .of_match_table = mxs_hwmon_of_match, + }, +}; + +module_platform_driver(mxs_hwmon_driver); + +MODULE_AUTHOR("Alexandre Belloni "); +MODULE_DESCRIPTION("Freescale i.MX28 hwmon sensor driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:mxs-hwmon");