diff mbox

[PATCHv3,8/8] ARM: mxs: dt: cfa10057: remove hogpins

Message ID 1372424577-8279-9-git-send-email-alexandre.belloni@free-electrons.com (mailing list archive)
State New, archived
Headers show

Commit Message

Alexandre Belloni June 28, 2013, 1:02 p.m. UTC 
Necessary pins are now grabbed by respective drivers. Unecessary hogpins are
simply removed.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
---
 arch/arm/boot/dts/imx28-cfa10057.dts | 23 +++--------------------
 1 file changed, 3 insertions(+), 20 deletions(-)

Comments

Maxime Ripard June 29, 2013, 7:11 a.m. UTC | #1 
On Fri, Jun 28, 2013 at 03:02:57PM +0200, Alexandre Belloni wrote:
> Necessary pins are now grabbed by respective drivers. Unecessary hogpins are
> simply removed.
> 
> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
index 2da713c..0333c05 100644
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -23,35 +23,16 @@ 
 	apb@80000000 {
 		apbh@80000000 {
 			pinctrl@80018000 {
-				pinctrl-names = "default", "default";
-				pinctrl-1 = <&hog_pins_cfa10057
-					&hog_pins_cfa10057_pullup>;
-
-				hog_pins_cfa10057: hog-10057@0 {
+				usb_pins_cfa10057: usb-10057@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
 						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
-						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
 					fsl,pull-up = <0>;
 				};
 
-				hog_pins_cfa10057_pullup: hog-10057-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
-						0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */
-						0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */
-						0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
-						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
-					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <1>;
-				};
-
 				lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -164,6 +145,8 @@ 
 
 		reg_usb1_vbus: usb1_vbus {
 			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_pins_cfa10057>;
 			regulator-name = "usb1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;