diff mbox

[v2,1/4] arm: omap: Add phy binding info for musb in plat data

Message ID 1373282057-20181-2-git-send-email-kishon@ti.com (mailing list archive)
State New, archived
Headers show

Commit Message

Kishon Vijay Abraham I July 8, 2013, 11:14 a.m. UTC
In order for controllers to get PHY in case of non dt boot, the phy
binding information (phy label) should be added in the platform
data of the controller.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
---
 arch/arm/mach-omap2/usb-musb.c |    3 +++
 include/linux/usb/musb.h       |    3 +++
 2 files changed, 6 insertions(+)

Comments

Tony Lindgren July 16, 2013, 12:44 p.m. UTC | #1
* Kishon Vijay Abraham I <kishon@ti.com> [130708 04:20]:
> In order for controllers to get PHY in case of non dt boot, the phy
> binding information (phy label) should be added in the platform
> data of the controller.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> Acked-by: Felipe Balbi <balbi@ti.com>
> Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Acked-by: Tony Lindgren <tony@atomide.com>

> ---
>  arch/arm/mach-omap2/usb-musb.c |    3 +++
>  include/linux/usb/musb.h       |    3 +++
>  2 files changed, 6 insertions(+)
> 
> diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
> index 8c4de27..20b42de 100644
> --- a/arch/arm/mach-omap2/usb-musb.c
> +++ b/arch/arm/mach-omap2/usb-musb.c
> @@ -85,6 +85,9 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
>  	musb_plat.mode = board_data->mode;
>  	musb_plat.extvbus = board_data->extvbus;
>  
> +	if (cpu_is_omap34xx())
> +		musb_plat.phy_name = "twl4030";
> +
>  	if (soc_is_am35xx()) {
>  		oh_name = "am35x_otg_hs";
>  		name = "musb-am35x";
> diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
> index 053c268..c05d46d 100644
> --- a/include/linux/usb/musb.h
> +++ b/include/linux/usb/musb.h
> @@ -104,6 +104,9 @@ struct musb_hdrc_platform_data {
>  	/* for clk_get() */
>  	const char	*clock;
>  
> +	/* phy device label */
> +	const char	*phy_name;
> +
>  	/* (HOST or OTG) switch VBUS on/off */
>  	int		(*set_vbus)(struct device *dev, int is_on);
>  
> -- 
> 1.7.10.4
>
diff mbox

Patch

diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 8c4de27..20b42de 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -85,6 +85,9 @@  void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
 	musb_plat.mode = board_data->mode;
 	musb_plat.extvbus = board_data->extvbus;
 
+	if (cpu_is_omap34xx())
+		musb_plat.phy_name = "twl4030";
+
 	if (soc_is_am35xx()) {
 		oh_name = "am35x_otg_hs";
 		name = "musb-am35x";
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index 053c268..c05d46d 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -104,6 +104,9 @@  struct musb_hdrc_platform_data {
 	/* for clk_get() */
 	const char	*clock;
 
+	/* phy device label */
+	const char	*phy_name;
+
 	/* (HOST or OTG) switch VBUS on/off */
 	int		(*set_vbus)(struct device *dev, int is_on);