diff mbox

[v2,3/5] ARM: AT91: DTS: sam9x5ek: add WM8731 codec

Message ID 1373290193-25300-4-git-send-email-richard.genoud@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Richard Genoud July 8, 2013, 1:29 p.m. UTC 
The WM8731 codec on sam9x5ek board is on i2c, address 1A

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
---
 arch/arm/boot/dts/at91sam9x5ek.dtsi |    5 +++++
 1 file changed, 5 insertions(+)

Comments

Mark Brown July 8, 2013, 2:36 p.m. UTC | #1 
On Mon, Jul 08, 2013 at 03:29:51PM +0200, Richard Genoud wrote:
> The WM8731 codec on sam9x5ek board is on i2c, address 1A
> 
> Signed-off-by: Richard Genoud <richard.genoud@gmail.com>

Acked-by: Mark Brown <broonie@linaro.org>

This should go via arm-soc.
diff mbox

Patch

diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
index d107241..e6fb309 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -59,6 +59,11 @@ 
 
 			i2c0: i2c@f8010000 {
 				status = "okay";
+
+				wm8731: wm8731@1a {
+					compatible = "wm8731";
+					reg = <0x1a>;
+				};
 			};
 
 			pinctrl@fffff400 {