diff mbox

[v5,2/7] sound: sam9x5_wm8731: machine driver for at91sam9x5 wm8731 boards

Message ID 1373559359-31607-3-git-send-email-richard.genoud@gmail.com (mailing list archive)
State New, archived
Headers show

Commit Message

Richard Genoud July 11, 2013, 4:15 p.m. UTC
From: Nicolas Ferre <nicolas.ferre@atmel.com>

Description of the Asoc machine driver for an at91sam9x5 based board
with a wm8731 audio DAC. Wm8731 is clocked by a crystal and used as a
master on the SSC/I2S interface. Its connections are a headphone jack
and an Line input jack.

[Richard: this is based on an old patch from Nicolas that I forward
ported and reworked to use only device tree]

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
---
 .../bindings/sound/atmel-sam9x5-wm8731-audio.txt   |   41 ++++
 sound/soc/atmel/Kconfig                            |   10 +
 sound/soc/atmel/Makefile                           |    2 +
 sound/soc/atmel/sam9x5_wm8731.c                    |  207 ++++++++++++++++++++
 4 files changed, 260 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt
 create mode 100644 sound/soc/atmel/sam9x5_wm8731.c

Comments

Mark Brown July 12, 2013, 11:49 a.m. UTC | #1
On Thu, Jul 11, 2013 at 06:15:54PM +0200, Richard Genoud wrote:
> From: Nicolas Ferre <nicolas.ferre@atmel.com>
> 
> Description of the Asoc machine driver for an at91sam9x5 based board

ASoC.

> +sam9x5 pins:
> + * LOUT
> + * ROUT
> + * LHPOUT
> + * RHPOUT
> + * LLINEIN
> + * RLINEIN
> + * MICIN

These aren't pins on the CPU, they're pins on the CODEC, and you should
be adding this to the binding document for the CODEC and referring to
that rather than having them in each individual binding document.  This
also helps if any new variants are added (not that this is likely for
the WM8731).

> +static struct sam9x5_drvdata sam9x5_priv;

Why is this a global static?

> +	ret = snd_soc_register_card(&snd_soc_sam9x5);
> +	if (ret) {
> +		dev_err(&pdev->dev,
> +			"ASoC: Platform device allocation failed\n");
> +		goto out_put_audio;
> +	}

> +	platform_set_drvdata(pdev, &snd_soc_sam9x5);

It should be being dynamically allocated and retrieved as driver data
when needed.
Richard Genoud July 15, 2013, 2:59 p.m. UTC | #2
2013/7/12 Mark Brown <broonie@kernel.org>:
> On Thu, Jul 11, 2013 at 06:15:54PM +0200, Richard Genoud wrote:
>> From: Nicolas Ferre <nicolas.ferre@atmel.com>
>>
>> Description of the Asoc machine driver for an at91sam9x5 based board
>
> ASoC.
>
>> +sam9x5 pins:
>> + * LOUT
>> + * ROUT
>> + * LHPOUT
>> + * RHPOUT
>> + * LLINEIN
>> + * RLINEIN
>> + * MICIN
>
> These aren't pins on the CPU, they're pins on the CODEC, and you should
> be adding this to the binding document for the CODEC and referring to
> that rather than having them in each individual binding document.  This
> also helps if any new variants are added (not that this is likely for
> the WM8731).
ok, I'll move that

>
>> +static struct sam9x5_drvdata sam9x5_priv;
>
> Why is this a global static?
>
>> +     ret = snd_soc_register_card(&snd_soc_sam9x5);
>> +     if (ret) {
>> +             dev_err(&pdev->dev,
>> +                     "ASoC: Platform device allocation failed\n");
>> +             goto out_put_audio;
>> +     }
>
>> +     platform_set_drvdata(pdev, &snd_soc_sam9x5);
>
> It should be being dynamically allocated and retrieved as driver data
> when needed.
ok.

Thanks !
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt b/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt
new file mode 100644
index 0000000..630ef8b
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel-sam9x5-wm8731-audio.txt
@@ -0,0 +1,41 @@ 
+* Atmel at91sam9x5ek wm8731 audio complex
+
+Required properties:
+  - compatible: "atmel,sam9x5-wm8731-audio"
+  - atmel,model: The user-visible name of this sound complex.
+  - atmel,ssc-controller: The phandle of the SSC controller
+  - atmel,audio-codec: The phandle of the WM8731 audio codec
+  - atmel,audio-routing: A list of the connections between audio components.
+    Each entry is a pair of strings, the first being the connection's sink,
+    the second being the connection's source.
+
+Available audio endpoints for the audio-routing table:
+
+Board connectors:
+ * Headphone Jack
+ * Line In Jack
+
+sam9x5 pins:
+ * LOUT
+ * ROUT
+ * LHPOUT
+ * RHPOUT
+ * LLINEIN
+ * RLINEIN
+ * MICIN
+
+Example:
+sound {
+	compatible = "atmel,sam9x5-wm8731-audio";
+
+	atmel,model = "wm8731 @ AT91SAM9X5EK";
+
+	atmel,audio-routing =
+		"Headphone Jack", "RHPOUT",
+		"Headphone Jack", "LHPOUT",
+		"LLINEIN", "Line In Jack",
+		"RLINEIN", "Line In Jack";
+
+	atmel,ssc-controller = <&ssc0>;
+	atmel,audio-codec = <&wm8731>;
+};
diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig
index 1c0b185..9eb8c49 100644
--- a/sound/soc/atmel/Kconfig
+++ b/sound/soc/atmel/Kconfig
@@ -33,6 +33,16 @@  config SND_AT91_SOC_SAM9G20_WM8731
 	  Say Y if you want to add support for SoC audio on WM8731-based
 	  AT91sam9g20 evaluation board.
 
+config SND_AT91_SOC_SAM9X5_WM8731
+	tristate "SoC Audio support for WM8731-based at91sam9x5 board"
+	depends on ATMEL_SSC && SND_ATMEL_SOC && SOC_AT91SAM9X5
+	select SND_ATMEL_SOC_SSC
+	select SND_ATMEL_SOC_DMA
+	select SND_SOC_WM8731
+	help
+	  Say Y if you want to add support for audio SoC on an
+	  at91sam9x5 based board that is using WM8731 codec.
+
 config SND_AT91_SOC_AFEB9260
 	tristate "SoC Audio support for AFEB9260 board"
 	depends on ARCH_AT91 && ATMEL_SSC && ARCH_AT91 && MACH_AFEB9260 && SND_ATMEL_SOC
diff --git a/sound/soc/atmel/Makefile b/sound/soc/atmel/Makefile
index 41967cc..7784c09 100644
--- a/sound/soc/atmel/Makefile
+++ b/sound/soc/atmel/Makefile
@@ -11,6 +11,8 @@  obj-$(CONFIG_SND_ATMEL_SOC_SSC) += snd-soc-atmel_ssc_dai.o
 
 # AT91 Machine Support
 snd-soc-sam9g20-wm8731-objs := sam9g20_wm8731.o
+snd-soc-sam9x5-wm8731-objs := sam9x5_wm8731.o
 
 obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o
+obj-$(CONFIG_SND_AT91_SOC_SAM9X5_WM8731) += snd-soc-sam9x5-wm8731.o
 obj-$(CONFIG_SND_AT91_SOC_AFEB9260) += snd-soc-afeb9260.o
diff --git a/sound/soc/atmel/sam9x5_wm8731.c b/sound/soc/atmel/sam9x5_wm8731.c
new file mode 100644
index 0000000..8ecf29f
--- /dev/null
+++ b/sound/soc/atmel/sam9x5_wm8731.c
@@ -0,0 +1,207 @@ 
+/*
+ * sam9x5_wm8731   --	SoC audio for AT91SAM9X5-based boards
+ *			that are using WM8731 as codec.
+ *
+ *  Copyright (C) 2011 Atmel,
+ *		  Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ *  Copyright (C) 2013 Paratronic,
+ *		  Richard Genoud <richard.genoud@gmail.com>
+ *
+ * Based on sam9g20_wm8731.c by:
+ * Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+#include <linux/of.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/device.h>
+
+#include <sound/soc.h>
+#include <sound/soc-dai.h>
+#include <sound/soc-dapm.h>
+
+#include "../codecs/wm8731.h"
+#include "atmel_ssc_dai.h"
+
+
+#define MCLK_RATE 12288000
+
+#define DRV_NAME "sam9x5-snd-wm8731"
+
+struct sam9x5_drvdata {
+	int ssc_id;
+};
+
+/*
+ * Logic for a wm8731 as connected on a at91sam9x5ek based board.
+ */
+static int sam9x5_wm8731_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	struct device *dev = rtd->dev;
+	int ret;
+
+	dev_dbg(dev, "ASoC: %s called\n", __func__);
+
+	/* set the codec system clock for DAC and ADC */
+	ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK_XTAL,
+				     MCLK_RATE, SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		dev_err(dev, "ASoC: Failed to set WM8731 SYSCLK: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * Audio paths on at91sam9x5ek board:
+ *
+ *  |A| ------------> |      | ---R----> Headphone Jack
+ *  |T| <----\        |  WM  | ---L--/
+ *  |9| ---> CLK <--> | 8731 | <--R----- Line In Jack
+ *  |1| <------------ |      | <--L--/
+ */
+static const struct snd_soc_dapm_widget sam9x5_dapm_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone Jack", NULL),
+	SND_SOC_DAPM_LINE("Line In Jack", NULL),
+};
+
+static struct snd_soc_dai_link sam9x5_dai = {
+	.name = "WM8731",
+	.stream_name = "WM8731 PCM",
+	.codec_dai_name = "wm8731-hifi",
+	.init = sam9x5_wm8731_init,
+	.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+		| SND_SOC_DAIFMT_CBM_CFM,
+};
+
+static struct sam9x5_drvdata sam9x5_priv;
+
+static struct snd_soc_card snd_soc_sam9x5 = {
+	.owner = THIS_MODULE,
+	.dai_link = &sam9x5_dai,
+	.num_links = 1,
+	.dapm_widgets = sam9x5_dapm_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(sam9x5_dapm_widgets),
+	.drvdata = &sam9x5_priv,
+};
+
+static int sam9x5_wm8731_driver_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct device_node *codec_np, *cpu_np;
+	int ret;
+
+	if (!np) {
+		dev_err(&pdev->dev, "No device node supplied\n");
+		return -EINVAL;
+	}
+
+	snd_soc_sam9x5.dev = &pdev->dev;
+
+	ret = snd_soc_of_parse_card_name(&snd_soc_sam9x5, "atmel,model");
+	if (ret) {
+		dev_err(&pdev->dev, "atmel,model node missing\n");
+		goto out;
+	}
+
+	ret = snd_soc_of_parse_audio_routing(&snd_soc_sam9x5,
+					     "atmel,audio-routing");
+	if (ret) {
+		dev_err(&pdev->dev, "atmel,audio-routing node missing\n");
+		goto out;
+	}
+
+	codec_np = of_parse_phandle(np, "atmel,audio-codec", 0);
+	if (!codec_np) {
+		dev_err(&pdev->dev, "atmel,audio-codec node missing\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	sam9x5_dai.codec_of_node = codec_np;
+
+	cpu_np = of_parse_phandle(np, "atmel,ssc-controller", 0);
+	if (!cpu_np) {
+		dev_err(&pdev->dev, "atmel,ssc-controller node missing\n");
+		ret = -EINVAL;
+		goto out;
+	}
+	sam9x5_dai.cpu_of_node = cpu_np;
+	sam9x5_dai.platform_of_node = cpu_np;
+
+	sam9x5_priv.ssc_id = of_alias_get_id(cpu_np, "ssc");
+
+	ret = atmel_ssc_set_audio(sam9x5_priv.ssc_id);
+	if (ret != 0) {
+		dev_err(&pdev->dev,
+			"ASoC: Failed to set SSC %d for audio: %d\n",
+			ret, sam9x5_priv.ssc_id);
+		goto out;
+	}
+
+	of_node_put(codec_np);
+	of_node_put(cpu_np);
+
+	ret = snd_soc_register_card(&snd_soc_sam9x5);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"ASoC: Platform device allocation failed\n");
+		goto out_put_audio;
+	}
+
+	platform_set_drvdata(pdev, &snd_soc_sam9x5);
+
+	dev_dbg(&pdev->dev, "ASoC: %s ok\n", __func__);
+
+	return ret;
+
+out_put_audio:
+	atmel_ssc_put_audio(sam9x5_priv.ssc_id);
+out:
+	return ret;
+}
+
+static int sam9x5_wm8731_driver_remove(struct platform_device *pdev)
+{
+	struct snd_soc_card *card = platform_get_drvdata(pdev);
+	struct sam9x5_drvdata *sam9x5_priv = card->drvdata;
+
+	snd_soc_unregister_card(card);
+	atmel_ssc_put_audio(sam9x5_priv->ssc_id);
+
+	return 0;
+}
+
+static const struct of_device_id sam9x5_wm8731_of_match[] = {
+	{ .compatible = "atmel,sam9x5-wm8731-audio", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sam9x5_wm8731_of_match);
+
+static struct platform_driver sam9x5_wm8731_driver = {
+	.driver = {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(sam9x5_wm8731_of_match),
+	},
+	.probe = sam9x5_wm8731_driver_probe,
+	.remove = sam9x5_wm8731_driver_remove,
+};
+module_platform_driver(sam9x5_wm8731_driver);
+
+/* Module information */
+MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>");
+MODULE_AUTHOR("Richard Genoud <richard.genoud@gmail.com>");
+MODULE_DESCRIPTION("ALSA SoC machine driver for AT91SAM9x5 - WM8731");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);